nihil

Member, Known Well
@nihil - is that the D-20 turbine perc bubbler? How the heck are you using that thing with the e-nano??? The initial pull required for turbine action was wayyyy too much for my tastes. I re-sold mine within 48 hours of owning it (I also think my perc wasn't perfect, it did some funky stuff)

Nice case though! How long do you let the Nano cool before you close the lid?

I let the nano cool for at least 30 minutes before putting it in the case. I am very strict about vaping and driving though, so really, it has never been on from the previous night before driving.

And yes, that is your favorite bubbler, the Do20-Q. Yes, it's chuggy. Yes, it doesn't pair well with the nano. Yes, it is fun as hell to show people for the first time (it makes an epic cyclone after all).

But yeah, you dated this particular case. I made it last summer when that bubbler first came out and I still used it. Haven't used it in months and may gift it to a friend that combusts.

VERY COOL! Just a tad too much overkill for me, but definitely like the look with all the gear in there. Think I'm gonna be shopping for a smaller one, though.

I'm going to be doing the same for a simpler one bubbler setup. If I'm not bringing a bubbler, I use the epicvape bag that came with my nano.

I've got a meeting with an American case company this week...

Very interested to see what you guys come up with. Travel cases are always a nice accessory to anything worth protecting.

Sometimes I like to take a hit & put my stem down, the problem with that is the herb spills out. The nano stem does stand up right but if it falls it will break. I found a mod for this with the solo stem cap which lets me cap up the nano bowl & put it down & I don't have to worry about my herbs spilling out. The problem with this is I still have to hold the stem till it cools off a bit then put the plastic stem cap on which is annoying. Does anyone have a better idea for this problem? Yes I know I can get a nano stand and put the stem there standing up right but that's not a option for me.

124wlfm.jpg




Daaamn bro two nanos & a roor? Damn why couldn't i be your next door neighbor? :doh: LOL


What I do: Pint glass with the enano carrying bag scrunched up and placed in the glass as a cushion. Here's a picture, but I normally make sure none of the stems touch each other. In your case, make sure they sit basket side up, like the two in the back.
oihxVD2.jpg


I've left a few stems loaded for a day or two, then hit them. They were dry enough to create some heavy vapor.
 
Last edited by a moderator:

Chezgreendream

First the flavor, then the buZzz settles in....
Sometimes I like to take a hit & put my stem down, the problem with that is the herb spills out. The nano stem does stand up right but if it falls it will break. I found a mod for this with the solo stem cap which lets me cap up the nano bowl & put it down & I don't have to worry about my herbs spilling out. The problem with this is I still have to hold the stem till it cools off a bit then put the plastic stem cap on which is annoying. Does anyone have a better idea for this problem? Yes I know I can get a nano stand and put the stem there standing up right but that's not a option for me.

124wlfm.jpg




Daaamn bro two nanos & a roor? Damn why couldn't i be your next door neighbor? :doh: LOL

I have always thought. Maybe someone can invent a somekind of silicone plug that you can plug the adapter or stem while its still hot or preload either one for later use. Any takers?
 

olivianewtonjohn

Well-Known Member
I have always thought. Maybe someone can invent a somekind of silicone plug that you can plug the adapter or stem while its still hot or preload either one for later use. Any takers?
Its already been invented LOL. All you would need is the same high temp silicone material found on the stem except in cap form. They make them for the arizer air. you can get them im sure in many sizes from http://www.mcmaster.com/
 

Chezgreendream

First the flavor, then the buZzz settles in....
Its already been invented LOL. All you would need is the same high temp silicone material found on the stem except in cap form. They make them for the arizer air. you can get them im sure in many sizes from http://www.mcmaster.com/

Ok, excuse my ignorance, but I did do a search at the website mentioned above, but I am not sure what I am looking for. I put silicone rubber in the search, I found everything except what looks to be a plug or what I can make a plug out of. Is there something more specific I should put in the search bar?
 
Chezgreendream,
  • Like
Reactions: SSVUN~YAH

olivianewtonjohn

Well-Known Member
Ok, excuse my ignorance, but I did do a search at the website mentioned above, but I am not sure what I am looking for. I put silicone rubber in the search, I found everything except what looks to be a plug or what I can make a plug out of. Is there something more specific I should put in the search bar?
Honestly man I know they have them just not sure how to use that site either. It has a system unlike other sites. If you search the arizer solo thread you could probably find them
 

Chezgreendream

First the flavor, then the buZzz settles in....
Honestly man I know they have them just not sure how to use that site either. It has a system unlike other sites. If you search the arizer solo thread you could probably find them

Thanks. Yeah youre right, it is a weird site to navigate through. it is not cellphone friendly, as I tried to view things at a normal pace and it kinda hangs at some points. It looks like its in there somewhere, just need the patience and the time to find it. Thanks for the leads. I will look into it.
 
Chezgreendream,
  • Like
Reactions: SSVUN~YAH

KidFated.

Unknown Member
Thanks. Yeah youre right, it is a weird site to navigate through. it is not cellphone friendly, as I tried to view things at a normal pace and it kinda hangs at some points. It looks like its in there somewhere, just need the patience and the time to find it. Thanks for the leads. I will look into it.
Make sure to get the high temp version if you wanna cap them while still hot.
 
KidFated.,
  • Like
Reactions: SSVUN~YAH

olivianewtonjohn

Well-Known Member
Thanks. Yeah youre right, it is a weird site to navigate through. it is not cellphone friendly, as I tried to view things at a normal pace and it kinda hangs at some points. It looks like its in there somewhere, just need the patience and the time to find it. Thanks for the leads. I will look into it.
Ok some searching wizardry (thanks to posts by @OF) found this:

http://www.mcmaster.com/#catalog/119/3747/=w4o3jk

You want this:
"High Temperature—Withstands temperatures up to 446° F for 10 minutes and has a durometer hardness of 88A. Color is black"

Looks like its high temp vinyl, always thought it was silicone.....the more you know!
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Thank you for this!
Thank you for my Cherry EV-1 that became a good friends first vape, my Maple Burl that is incredible, my Maple OG I got from another member, and a TIA for my future Nano! :bowdown:
amn bro two nanos & a roor?
Lol, it's not a RooR it's an OG GB-187, but thanks for the kind words! :tup:
 

flying solo

Active Member
Been running dry for two weeks, which is like using your maserati as a garden hoe, now ghetto wet, which is like driving your maserati around the walmart parking lot at 15mph. I cut a thin wedge of masking tape and stuck it on the dial with the tip set on 5.5. This has reduces operator error to zero, and is producing consistent perfect amounts with incredible taste. I like the warm water idea, but my tube makes such a racket without the ice as a sonic buffer, I have had to return to ice, until I manage a proper bubbler.
 

$un

Well-Known Member
I have always thought. Maybe someone can invent a somekind of silicone plug that you can plug the adapter or stem while its still hot or preload either one for later use. Any takers?

I think that's an excellent idea & I would buy it in a quickness

Which one would be a better option to mate with the nano?

First
cni3fBe.jpg


Second
fUdnqpA.jpg


Third
u22cg8Q.jpg


I'm having a hard time deciding :shrug: I think I like the second one more
 
Last edited:

$un

Well-Known Member
So after using my nano for two days I gave my stem a wash. It was super easy to clean with some alcohol in the tube, a few shakes & voila its new again. After washing it I put the stem down for 10-15 minutes to air dry but only the outside got dried & still had water inside the stem. I took a cloth snaked it inside & wiped it dry. Is there a better way to do this? What's the fastest way to get the stem dried?
 
$un,

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
So after using my nano for two days I gave my stem a wash. It was super easy to clean with some alcohol in the tube, a few shakes & voila its new again. After washing it I put the stem down for 10-15 minutes to air dry but only the outside got dried & still had water inside the stem. I took a cloth snaked it inside & wiped it dry. Is there a better way to do this? What's the fastest way to get the stem dried?
I don't think anything could be faster or better than snaking a dry cloth through it. Are you looking to accomplish this in a "Nano" second?!!!:rofl:
 

$un

Well-Known Member
I don't think anything could be faster or better than snaking a dry cloth through it. Are you looking to accomplish this in a "Nano" second?!!!:rofl:

Nah actually I'm trying to find a faster drying method, I'm impatient & I was thinking someone would have a different method.
 
$un,
Top Bottom