Chezgreendream

First the flavor, then the buZzz settles in....
I've noticed this too. My theory is that the cold water cold down the glass which causes vapor to condense all over the inside. Warmer water definitely seems to leave the glass cleaner.


Sounds like a great theory, but I read somewhere that vaping with warm water can cause some health issues. Can somebody please get this outside my head.
 
Chezgreendream,
  • Like
Reactions: $un

$un

Well-Known Member
2h6rd68.jpg


Had a nice long 2 hour session with nano this morning. After getting super toasted I was scanning through my TV channels to find something to watch. Couldn't find nothing to watch for a while until I finally came across one of my favorite movies on How High!!! Now even though I seen that movie too many times, how can I pass up on it? :razz: Have been enjoying my Sunday morning so far, hope everyone is also having a good Sunday. Cheers! :science::leaf::tup:
 

DieHard

Accessory supplier
Accessory Maker
Maybe Legionnaires' disease?
:lmao:
Maybe smokers leg.

If you change the water frequently, there should be no health issues associated with whichever temperature water you use. Warmer water will hydrate the vapor. Cold water tends to dry out the vapor.
Use Distilled water, clean with ISO and or PBW. Don't fill your bong from a bird feeder, a/c condensate or a pond.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Last edited:
SSVUN~YAH,
  • Like
Reactions: 421

olivianewtonjohn

Well-Known Member

p1ssbucket

Well-Known Member
As I saw somewhere here in the thread, that after a session you can blow the screen. What I do is blow the adapter not the side where the herb sits on but on the other side, hard! To dislodge any parricles that stick around. While every is still hot. The baskets last a longer while without getting clogged up. Way longer, than when I used to just vape and repeat. Thats if its herbs your vaping. It might be different for other stuff
Thank you for your suggestion but I have to do this exact process after every time in vape a gong even once and that is what turned me off from using it for now. Some days I will leave the nano sitting on a gong for 30 minutes and try the blow thru! I know I should be getting much better airflow and vapor production. I hope ace of vape would list the all glass gongs on the normal webstore instead of having to dig for them, but what can I say, I have a glass gong on order now and I can't wait for it to get here.

Ps I use a room temp water from a Brita filter in my bongs :)
 
p1ssbucket,

Chezgreendream

First the flavor, then the buZzz settles in....
Thank you for your suggestion but I have to do this exact process after every time in vape a gong even once and that is what turned me off from using it for now. Some days I will leave the nano sitting on a gong for 30 minutes and try the blow thru! I know I should be getting much better airflow and vapor production. I hope ace of vape would list the all glass gongs on the normal webstore instead of having to dig for them, but what can I say, I have a glass gong on order now and I can't wait for it to get here.

Ps I use a room temp water from a Brita filter in my bongs :)

Its Cool, I understand the process is tedious. I hate when I have to clean my bubbler. I would hope sometimes if I snap my fingers it will clean itself. Just because I am always on the go and cleaning can only be put back for so long, before Im left wondering if I am inhaling something alien.

But I just did vape with warm water.
 
Last edited:

p1ssbucket

Well-Known Member
Its Cool, I understand the process is tedious. I hate when I have to clean my bubbler. I would hope sometimes if I snap my fingers it will clean itself. Just because I am always on the go and cleaning can only be put back for so long, before Im left wondering if I am inhaling something alien.

But I just did vape with warm water.
No worries Bro and I understands! I hate cleaning my gear as often as I should lol but hey I think you probably just have to change screens eventually. I have been using the same screen since I got my nano and it has seen so many ounces of weed and grams of concentration. Probably a whole pound thru that one little screen. I can't get it clean all the way however I notice epicvape also sells more baskets too so I will grab some and just toss this old one? Or frame it on the wall maybe.
 

nihil

Member, Known Well
Mentioned yesterday, here is my Plano Pistol Case for use with the enano:
xbhnBTk.jpg


Probably overkill for most, but it works well for taking "everything" with you.

I modified it this morning to hold another Stem and GonG. The enano compresses down when closed, so ignore it standing so high when the case is open. The power cord goes behind the foam, but with my 1st gen enano I flip it over and the power cable fits loosely on top.

Cheap, effective, cool.
 
Last edited:

Chezgreendream

First the flavor, then the buZzz settles in....
Mentioned yesterday, here is my Plano Pistol Case for use with the enano:
xbhnBTk.jpg


Probably overkill for most, but it works well for taking "everything" with you.

I modified it this morning t o hold another Stem and GonG. The enano compresses down when closed, so ignore it standing so high when the case is open. The power cord goes behind the foam, but with my 1st gen. enano I flip it over and the power cable fits loosely on top.

Cheap, effective, cool.


Mr. 007. That looks cool as hell. Why two bubblers? I was thinking. Considering you can rotate between both bubblers and the same e nano. But then wouldnt that would lessen the heat as it would not give it enough time to recharge pulling and cooling the core? Or is that one bubbler there just to share?
 
Chezgreendream,

nihil

Member, Known Well
Simple: overkill.

The smaller cases were about the same price, and either are easy enough to grab, place in the trunk, then present. Might as well have some options when out and about is the basic idea.

It's also a conversation piece. In other words, no reason, just cool as hell.
 

Delta3DStudios

Well-Known Member
Accessory Maker
@nihil - is that the D-20 turbine perc bubbler? How the heck are you using that thing with the e-nano??? The initial pull required for turbine action was wayyyy too much for my tastes. I re-sold mine within 48 hours of owning it (I also think my perc wasn't perfect, it did some funky stuff)

Nice case though! How long do you let the Nano cool before you close the lid?
 
Last edited by a moderator:

flotntoke

thoroughly vaped
No worries Bro and I understands! I hate cleaning my gear as often as I should lol but hey I think you probably just have to change screens eventually. I have been using the same screen since I got my nano and it has seen so many ounces of weed and grams of concentration. Probably a whole pound thru that one little screen. I can't get it clean all the way however I notice epicvape also sells more baskets too so I will grab some and just toss this old one? Or frame it on the wall maybe.

I rotate my screens often and try to keep newer ones in the mix. Lately a few of the older ones have been getting too bent out of shape for me to mess with. Have you tried soaking that screen @p1ssbucket ? Throw it in some ISO overnight and hit it with an old toothbrush under hot water. This seems to get even the gunkiest ones clean.

There is a page 2 on the nano accessory page. Think it is just glass screen GonGs & stems. It's easy to miss.

Mentioned yesterday, here is my Plano Pistol Case for use with the enano:
xbhnBTk.jpg


Probably overkill for most, but it works well for taking "everything" with you.

I modified it this morning to hold another Stem and GonG. The enano compresses down when closed, so ignore it standing so high when the case is open. The power cord goes behind the foam, but with my 1st gen enano I flip it over and the power cable fits loosely on top.

Cheap, effective, cool.

VERY COOL! Just a tad too much overkill for me, but definitely like the look with all the gear in there. Think I'm gonna be shopping for a smaller one, though.
 

ACE OF VAPE

Vape outside the box
Manufacturer
Thank you for this!

Mentioned yesterday, here is my Plano Pistol Case for use with the enano:
xbhnBTk.jpg


Probably overkill for most, but it works well for taking "everything" with you.

I modified it this morning to hold another Stem and GonG. The enano compresses down when closed, so ignore it standing so high when the case is open. The power cord goes behind the foam, but with my 1st gen enano I flip it over and the power cable fits loosely on top.

Cheap, effective, cool.

I've got a meeting with an American case company this week...
 

$un

Well-Known Member
Sometimes I like to take a hit & put my stem down, the problem with that is the herb spills out. The nano stem does stand up right but if it falls it will break. I found a mod for this with the solo stem cap which lets me cap up the nano bowl & put it down & I don't have to worry about my herbs spilling out. The problem with this is I still have to hold the stem till it cools off a bit then put the plastic stem cap on which is annoying. Does anyone have a better idea for this problem? Yes I know I can get a nano stand and put the stem there standing up right but that's not a option for me.

124wlfm.jpg


My Maple Burl has a puppy paw!
END8wd3.jpg

nGUlYZO.jpg

bgWruWj.jpg

Sorry about the huge pics...​

Daaamn bro two nanos & a roor? Damn why couldn't i be your next door neighbor? :doh: LOL
 
Top Bottom