The Mighty/Mighty+ by Storz & Bickel

S

sammac

Well-Known Member
Does anyone know the dimensions of the O-ring that goes in the cooling chamber? I need the one that is in the middle (not the one attached to the mouthpiece). I seem to go thru those faster than the other O-rings. I tried 7/16 od x 5/16 id x 1/16 but it was too big. TIA
 
sammac,
tdriver

tdriver

Well-Known Member
sammac said:
Does anyone know the dimensions of the O-ring that goes in the cooling chamber? I need the one that is in the middle (not the one attached to the mouthpiece). I seem to go thru those faster than the other O-rings. I tried 7/16 od x 5/16 id x 1/16 but it was too big. TIA
Click to expand...


first, I think Germans use metric....... :borg:

middle ??? you mean the one that goes to the lock
I measured 8mm id 1.6mm thickness. it's tiny so I could be a bit of......
 
tdriver,
diddymao

diddymao

aint no party like a diddy party
El Barto said:
Been using my new Mighty for a few days. It's great for around the house. However, it bothers me that there is no way to set the Mighty down in a stable way. As others have pointed out, it doesn't stand upright which I was expecting, but still find it to be inconvenient for loading purposes. And when you put it on its side, it rocks back and forth. It's weird to me that there is no way to stabilize the thing without utilizing a hack with the tamping tool.
Click to expand...

Not sure if the tamping tool is actually a hack, clever bastards those germans, the plenty had a little hole that you could poke the brush in to make it stand upright

I find the tamping tool to work really well with the mighty , im sure s & b intended this dual use, otherwise the central clear tamping device on the filler would have been enough for tamping imho
 
El Barto

El Barto

Well-Known Member
diddymao said:
Not sure if the tamping tool is actually a hack, clever bastards those germans, the plenty had a little hole that you could poke the brush in to make it stand upright

I find the tamping tool to work really well with the mighty , im sure s & b intended this dual use, otherwise the central clear tamping device on the filler would have been enough for tamping imho
Click to expand...

Hmm. Seems possible but not likely to me. It's the same tamping tool used on the Crafty which can stand upright on its own (and also has the filling tool). Additionally, I don't find using the tool for standing the Mighty upright to be a very stable solution.
 
El Barto,
  • Like
Reactions: VegNVape
El Barto

El Barto

Well-Known Member
diddymao said:
get your point, not super stable, but whilst herb loading it does a job , after all it is a handheld, as in designed to be held in the hand, if you want 100% uber stability a volcano is probably the way to go
Click to expand...
I have a volcano but still would like to be able to set my Mighty down in a stable way. You make a good point but most handheld electronics like TV remotes can be laid down in a stable way.
 
Mike M

Mike M

Well-Known Member
diddymao said:
get your point, not super stable, but whilst herb loading it does a job , after all it is a handheld, as in designed to be held in the hand, if you want 100% uber stability a volcano is probably the way to go
Click to expand...
When combined with the loader (was skeptical about it at first, love it now) loading is easy with one hand.

Lately I have been using the liquid pad with about 1/3 or 1/2 of the bowl filled. It keeps the cooling chamber extra clean (used to clean every 3 or 4 days, now just once a week), and really makes the most out of small amounts.

BTW, I would never load the unit standing up, using the orange hand tool. It's just not that stable.
 
northern2020

northern2020

Member
greetings FC Mighty brethren

I'm extremely impressed with the Mighty, having owned the original Iolite, Arizer Solo (both retired) and Pax Ploom- and currently using in conjunction with my Volcano Digital, this machine is beastly.

I like my Pax, but ultimately the debris that collects in the vapour tube below the oven screen, and with my oven screen constantly popping out of place, the Mighty has supplanted this in my arsenal.

Elmomuzz - I'm sure you've heard this but cheers to an incredible mod - which I will be undertaking in the next few weeks...and btw what kind of bubbler do you own?

Cheers
 
Q

QualityVapes

Active Member
Hey guys, I haven't been on here in a while but when these vapes were released I was very vocal about how much better the Crafty is than the Mighty, in theory. But after using the Crafty for months I was really disappointed with the battery life, even with battery packs.

Any way, lucky for me it started blinking red & orange and needed to be sent in. So I called them and asked if the Crafty needed to be replace, if I could pay the difference and upgrade to a Mighty. They said yes, and I did just that!

In my opinion the Crafty's battery is manageable but very ANNOYING. My recommendation for anyone in the future is to go for the Mighty! Only way I would recommend the Crafty is if you have your home-vape game locked down and only see yourself using this vape STRICTLY for on-the-go, but these vapes are so great I imagine you'll end up wanting to use them at home.
(I appreciate all the help I got from this site. You guys all rock!)
b5sec1.jpg
 
Last edited:
macbill

macbill

Oh No! Mr macbill!!
Staff member
A week from today (hoy en ocho), I will travel back to My Mighty Moe (his name) . It will be a heartfelt reunion. I've missed him so. I think about him. Although I've mentioned this before, a person could make a stand with something that will slip into the tool pocket. I came up with this:

I took a bookcase shelf "L" (used on each corner of a shelf) and drilled a hole in some Lucite for the peg. The standing "L" portion should fit into the tool compartment. I can't wait to see if it works!

2015-02-10155705.jpg
 
Last edited:
Mindspin

Mindspin

New Member
Got my replacement Mighty about 2 days ago. They replaced it with a different unit (it has a different serial #) and sent it in my original box. This one charges up correctly! They sent it with another cooling unit. Upon my first inspection, the cooling unit they sent has been previously used. It had that familiar sweet smell and came with abv particles around the screen. Its not too dirty but i'll still give it a cleaning. Not thrilled about that, but atleast they sent me a extra cooling unit for backup! Maybe they just replaced my Mighty with a refurbished unit..

This is my first time using the Mighty and I've had about 6 sessions with it so far. Wow, this thing gets me medicated! I haven't vaped in about 2 years and its great to be back. I've only owned a vapor brothers but sold it a couple years ago. So far I'm satisfied with S&B, this vape is quality. Their customer service is exceptional too.
 
sweetherb

sweetherb

Well-Known Member
I have now had my Mighty for about 4 months. In that time, it has never failed to impress me.

My only real complaint is that, if anything, it is too efficient at extraction! In other words, I would like it to extract more slowly. With this in mind, do you guys think the metal ring around the bowl could be replaced with a kind of glass or medical grade ceramic sleeve?

I think the unit would be even better by reducing conduction like this. It would then be more like 90% convection, which would surely improve flavor on the third, fourth, fifth hit, What do you think?
 
sweetherb,
A

adam_baumm

Well-Known Member
Finally brought my mighty out. Did a jam with 3 other guys last night. Two who did partake reactions after exhaling were, like" wow" and pure smiles. They had no problems getting more than enough vapor as first time mighty users, seems it kicked them in the arse. My one buddy said he was floating and he only had a couple draws over a 4 hour period. I was letting it time out mid load and coming back to it several times and it was still great. This continues to impress me. Thank you S&B.
 
Last edited:
L

Ladytoker

New Member
I got the mighty about 2 weeks ago and agree with a lot of what other reviewers have already stated. The shut off time is short but if I've smoked enough it just makes me giggle--"oops forgot to smoke" :) The unit is amazing! Very smooth and cool vape. I had the Da Vinci before and this was just leaps and bounds better.

However,the other night I got home from work and my Mighty was totally dead. I mean no lights, no vibrating, no error code, NOTHING! I only owned it for 2 weeks. (yes, that's right, 2 weeks!). Are you f-ing kidding me? I'm sure I just got a lemon but I'm really pissed off. I thought part of the high price tag was for quality and reputation. I'm sure the manufacturer will make good on their warranty but I've still spent a lot of money and won't have anything to show for it for a few weeks.

It’s really an amazing vaporizer but for the price I’m less then thrilled with the quality.

Sad in Cambridge :(
 
Ladytoker,
A

adam_baumm

Well-Known Member
Hello Ladytoker. That's a drag. But S&b will take care of you. I believe you follow the warranty procedure on their site. My mighty is still going great , I have used it every day since November. All the best.
 
adam_baumm,
You must log in or register to reply here.
Top Bottom