• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

blindowl

goin to some place where I've never been before
Build quality is ok. glass is not thin, feels sturdy, weld on the mouthpiece look cleaner than the fc-187v1 did. It feels kinda chuggy, i have to pull kinda hard to maintain a steady draw. Maybe i dont have the water level quite right. 14mm female joint. Mouthpiece angle is good for me. All 4 pillars are slightly angled, they all seem to work. here it is with the mighty and the 14mm adapter from delta 3d studios. sorry for the low battery noise. followed by a dab.




but it looks like you just ordered one of everything :lol:

yes buying these pieces has become an addiction. gas as you folks here call it. for these prices its hard to resist. :D its nice to switch up and have options. i use them for awhile, the ones i like i keep, the rest i end up giving away to friends and fam

Is that 2nd one from yingmin?
I'd love done closer pics of it whenever you get a chance :)
If it's the one I'm thinking of, I thought it looked cool, but the pictures on the listing weren't enough to sell me on it...

yes it is the one from yingming. the gb-260. 10mm joint, it has a mini honeycomb perc. its not bad for a mini rig. heres a dab vid, i actually got it to use with the underdog, but im waiting for a 10mm to 14mm piece to arrive to try it.

O7zV7Sr.jpg



 

NorthernHuskie

Well-Known Member
Ok I ordered my FC-710 January 25th and it still hasn't gotten here. The last tracking update was from January 30th as dispatched from the Chengdu sorting center.

Should I be worried that it hasn't updated in 20 days? Is there anyway I can have someone check to see where it is now? Starting to get a little anxious to say the least lol
 
NorthernHuskie,
  • Like
Reactions: SSVUN~YAH

Frederick McGuire

Aggressively Loungey
Build quality is ok. glass is not thin, feels sturdy, weld on the mouthpiece look cleaner than the fc-187v1 did. It feels kinda chuggy, i have to pull kinda hard to maintain a steady draw. Maybe i dont have the water level quite right. 14mm female joint. Mouthpiece angle is good for me. All 4 pillars are slightly angled, they all seem to work. here it is with the mighty and the 14mm adapter from delta 3d studios. sorry for the low battery noise. followed by a dab.






yes buying these pieces has become an addiction. gas as you folks here call it. for these prices its hard to resist. :D its nice to switch up and have options. i use them for awhile, the ones i like i keep, the rest i end up giving away to friends and fam



yes it is the one from yingming. the gb-260. 10mm joint, it has a mini honeycomb perc. its not bad for a mini rig. heres a dab vid, i actually got it to use with the underdog, but im waiting for a 10mm to 14mm piece to arrive to try it.

O7zV7Sr.jpg



Ahh, damn, didn't know it only had a 10mm joint :(
Between that and the angle of the downstem I think ill pass on that one :(

It looks cool though :)
 

xer0

Well-Known Member
Ok I ordered my FC-710 January 25th and it still hasn't gotten here. The last tracking update was from January 30th as dispatched from the Chengdu sorting center.

Should I be worried that it hasn't updated in 20 days? Is there anyway I can have someone check to see where it is now? Starting to get a little anxious to say the least lol

I ordered a 710 and a 187 sidecar on 2/3. No updates after leaving Chengdu as well. I'm not too worried about it as this is usually how it goes for me with Chinese shipping. The 11 day turnaround on the Dcycler was a total shock to be honest.
 

Monsoon

Well-Known Member
I just went ahead and ordered the kathy egg, I was holding back but after seeing the pictures I figured it was only a matter of time :borg::leaf::borg:. I like how the white one looks but I really wish she would sell a clear one too.

I got the first kathy egg with the honeycomb and I really don't like it. Joint is angled, my perc was crooked and didn't like how it hit. But it was a $40 egg and the best thing available at the time. I'll probably give it to a friend so it will at least get some use. I want to try to have at least one egg in my collection if only to sit on my table as decoration :cool:
 

Philreal187

Well-Known Member
Im looking for some opinions, I have an UD in the mail matrix as I type and have being debating on picking up the FC 187. I own the pnwt and d020. I use my hammer out of the d020 a lot, and sometimes my pnp but thats mainly a stealth vape for out side the home. I just want to kno will I find the fc 187 more rewarding than the d020 with an UD?
 
@Frederick McGuire after cleaning mine this morning i noticed a fracture at that same support. I would recommend everyone hold off on the New Kathy Egg. I found a way to fix it before it broke. I always fix any salvageable piece with silicone. So i managed to save mine before it actually broke. @mixchu69 and @BoogerMan you may want to hold off on ordering this piece. If any of you get this piece I highly recommend getting some $4 silicone and put it on that joint to reinforce the weld. Those couple of bucks will save your other already invested $40. And @Frederick McGuire yours is easily fixable with the silicone. Don't know if it's worth your time though
 

Delta3DStudios

Well-Known Member
Accessory Maker
Im looking for some opinions, I have an UD in the mail matrix as I type and have being debating on picking up the FC 187. I own the pnwt and d020. I use my hammer out of the d020 a lot, and sometimes my pnp but thats mainly a stealth vape for out side the home. I just want to kno will I find the fc 187 more rewarding than the d020 with an UD?

Depends on what you define as 'more rewarding' - The FC-187 will provide more diffusion and a larger 'can' than your D020. You will get bigger cooler rips with less flavor with the FC-187

I still love pulling out my D020 every few months and using it for a week or two before moving on to some other glass - it's fun to switch them up from time to time
 

DieHard

Accessory supplier
Accessory Maker
@Frederick McGuire after cleaning mine this morning i noticed a fracture at that same support. I would recommend everyone hold off on the New Kathy Egg. I found a way to fix it before it broke. I always fix any salvageable piece with silicone. So i managed to save mine before it actually broke. @mixchu69 and @BoogerMan you may want to hold off on ordering this piece. If any of you get this piece I highly recommend getting some $4 silicone and put it on that joint to reinforce the weld. Those couple of bucks will save your other already invested $40. And @Frederick McGuire yours is easily fixable with the silicone. Don't know if it's worth your time though
I have the Kathy Feeb egg. Ihaven't noticed the bridge weld being bad on mine. But there is a small stress crack near one of the 4 places that
Connect the upper half to the lower half.
 

EverythingsHazy

Well-Known Member
received my peyote pillar from steven today. it looks pretty awesome, especially for less than $50.

havent tried it yet
Not to be that guy, but neither pillar piece from Steven are peyote pillars because the peyote part of the peyote pillar, is the ball perc with gridded slits, under the pillars. There are a mini pillar and a matrix pillar being produced.


That cleared up, how do the pillars look up close? It's the first time a Chinese vendor makes pillars.
 

NickDlow

Log Hog
Im looking for some opinions, I have an UD in the mail matrix as I type and have being debating on picking up the FC 187. I own the pnwt and d020. I use my hammer out of the d020 a lot, and sometimes my pnp but thats mainly a stealth vape for out side the home. I just want to kno will I find the fc 187 more rewarding than the d020 with an UD?

@Ratchett hit the nail on the head! I'm personally am waiting for the UFO piece, I think it's going to be taking over as my daily driver.

My current daily driver is my D-022! It's the perfect amount of diffusion, flavor city especially with log vapes. My RedwoodDog sits on there all day long!!
 

cybrguy

Putin is a War Criminal
Not to be that guy, but neither pillar piece from Steven are peyote pillars because the peyote part of the peyote pillar, is the ball perc with gridded slits, under the pillars.
I've been meaning to ask about this. Is the peyote perc supposed to look like a peyote button, or is it just a drugy association kind of thing?

Edit: Nevermind. The ones I have seen were always after they have dried for a while and were more disk shaped. I just looked online and noticed that when they are fresh they are rounder, and more berry shaped. So, like I say, nevermind. :)
 
Last edited:

Frederick McGuire

Aggressively Loungey
@Frederick McGuire after cleaning mine this morning i noticed a fracture at that same support. I would recommend everyone hold off on the New Kathy Egg. I found a way to fix it before it broke. I always fix any salvageable piece with silicone. So i managed to save mine before it actually broke. @mixchu69 and @BoogerMan you may want to hold off on ordering this piece. If any of you get this piece I highly recommend getting some $4 silicone and put it on that joint to reinforce the weld. Those couple of bucks will save your other already invested $40. And @Frederick McGuire yours is easily fixable with the silicone. Don't know if it's worth your time though
Hell, I'd love to be able to fix it, but I have no idea how I'd be able to get that base of the downstem to join back up.
Its such an awkward place it broke at...
 
Upon further inspection I realize that it is not a crack in my Kathy Egg, but a glass booger on the inside of the glass.
Edit to add video.
Awesome vid bro!! Even with the possible defect i love this piece hits like a dream. I love your music selection as well
as your T-shirt. Is that a hotsauce shirt for that rooster hot sauce?
 
Last edited:
Top Bottom