Discontinued Inhalater INH05/5S/6

PPN

Volute of Vapor
I love my glass capsules, I told before it was not a game changer...it's not true, these glass capsules turn my Xp&05 in completly different beasts, high efficiency with small load, more vapor at lower temp, only fresh taste and abv is defenitly not more blackened!

Since I got them I use my Inhalaters at home and enjoy, before it was only my on the go device!

Although glass capsules are not really nice on the go cause breaking...(it depends....) but you can carry it in a tube...
 

Inhalater

Well-Known Member
Manufacturer
valentinespecial.png
 

Custom Flower Hardware

Well-Known Member
Manufacturer
I just sent my Inh05 in for the upgrade and ordered some new glass caps for it! I'm super excited! Hey is that carbon fiber from Inhalater or did you wrap it yourself? IT'S BAD ASS!!!:tup:
 
Custom Flower Hardware,
  • Like
Reactions: scottg402

Old School

Vape13man
I love my glass capsules, I told before it was not a game changer...it's not true, these glass capsules turn my Xp&05 in completly different beasts, high efficiency with small load, more vapor at lower temp, only fresh taste and abv is defenitly not more blackened!

Since I got them I use my Inhalaters at home and enjoy, before it was only my on the go device!

Although glass capsules are not really nice on the go cause breaking...(it depends....) but you can carry it in a tube...
IKR..... once I started using the glass I just couldn't go back.....especially for private consumption.... I do like using the Polyimide caps for sharing with friends as they do hold more....

I take my glass caps out and about.... I use the WTA to help stabilize and support the glass so I haven't had an accident is a very long time....{knock on wood}....

Anyway all of that aside... your also going to be able to enjoy reclaiming the oils that will eventually condense along the inside walls of your new glass caps..... I use a bamboo spoon that came with my VB 2.0 DLX .... it works perfectly but pretty much anything you can find that is thin enough to slide inside the glass tube and be able to scape the walls.....

That which you reclaim is going to be extremely potent so tiny small pieces go a long way.... I mix a small ball or hotdog with my normal blend.....Fantastic... and great lasting power... enjoy...:peace:

I just sent my Inh05 in for the upgrade and ordered some new glass caps for it! I'm super excited! Hey is that carbon fiber from Inhalater or did you wrap it yourself? IT'S BAD ASS!!!:tup:
It is a new sticker being offered by Inhalater..... I'm not sure how I feel about them... sorta brings a bit more attention to it.... I do like the sticker in between the ribs.... but the holes are back where the LEDs are..... that I definitely don't like.....way too bright... the white rectangle or even a small white circle would be so much better..... they just shouldn't make an actual opening.... way too much....
 
Last edited:

PPN

Volute of Vapor
Awesome discount! It's cheaper than in their Indiegogo campaign!

Glass capsules are the way to go, I load mine with ungrounded flowers (just little pieces broke with hand) and get a nice session, I start at 5.5 or 6 with 05 and at 4-4.5 with Xp.
 

TransHumanC

Inhalater shill account
Yes unit is directly out of factory. They have some pretty cool things going on there.

Chocolope is a sativa. Very steady and straigh. Words fail me to discribe the flavour, sweet flowery and with a touch of citrus perhaps.

The grind is very important. Best is coffee grinder for taste and extraction: it makes for perfect vaporization and can fit more too. Fine filters are required like in the glass cap. Standard in the poly lets dust through

The dynamics of vaporization turn out to be all important. I think the technology landscape is about to change again.


chocolope.jpg
 

killick

But I like it!
So I made my first ever visit to a dispensary the other day. I'm currently testing LSD, Lemon Sour Diesel. At low temps it doesn't have a flavour, more of a numbness. At high temps it's decidedly soapy, but really fun! And I'm only trusting it in the 05s. It's really never out of my pocket - my wallet goes here, keys there, and phone and 05 there - we can leave. And it's simple to charge in the car with any of the USB cables there. I just need to carry an ABV container with me, cause without water I barely hit 5 (i'm at 8 now through water :)

Strain Highlights
The LSD strain was bred by Barneys Farm, with a lineage from Mazar and Skunk #1. It is a disease-resistant plant that does well in most growing conditions. The buds form in curved triangles, yielding approximately 600 grams per square meter. Flowering time is approximately 8-9 weeks. This marijuana strain is popular for delivering a vivid and psychedelic experience with a powerful body buzz and cerebral high. The THC content has been measured up to 24% with a CBD of 1.3%.
 

TransHumanC

Inhalater shill account
Did you try the glass capsule? If you suck in the medicine slowly like a straw I am sure you can get some pretty wild flavours at around 7

Looks like a pretty wild strain: Psychedelic! :freak:
 
TransHumanC,
  • Like
Reactions: killick

killick

But I like it!
I'm adding a glass cap to my next order. It seems every time I place an order they release something else great 3 days later. I'm really enjoying the wt adapter! I might just cobble some sort of plug for that and use it all the time! Till I get a glass cap to play with :)
 

TransHumanC

Inhalater shill account
I'm curious; the description for LSD strain specifies 1.3% CBD. What is CBD? I understand it is a byproduct of heated THC?
 
TransHumanC,

killick

But I like it!
There is a whole bunch of info relating to CBD out there, so you've got some exploring to do! Here's a starting point:

http://www.chicagonow.com/chicago-m...nabidiol-the-side-of-marijuana-you-dont-know/

There are also soem threads in the forums as well. I have 2 strains in the closet that are high CBD (9%) and low THC (<1%). I call these my 'breakfast' strains for pain mgmt.

http://www.projectcbd.org/

Did you try the glass capsule? If you suck in the medicine slowly like a straw I am sure you can get some pretty wild flavours at around 7

Looks like a pretty wild strain: Psychedelic! :freak:

Re: temps... I'm finding with this LSD strain that I can't really go any higher than 7. I can barely get a mouthful and I'm ready to start coughing. I can pull the ABV and it's a nice, dark coffee colour. Some other strains I can go to 9, not get much vapour, but the abv is still kinda greenish. Other strains almost need a few draws at 7 before going higher for the last few. It's an experience going into the higher temps... water is your friend :)
 
Last edited:

iAdrink

New Member
Hi all, I wish I could get a glass capsule for my Inhalater, I looked at the official website but I charge $ 60 Shipping !!! is theft, with that I could buy many capsules!
Do you know of any other place where I can get with affordable shipping?
 
iAdrink,

Ruta

Well-Known Member
@iAdrink , it all depends where you are in the world?
I contacted Inhalater with the same query and pushed for a stockist of spares in my country, UK, it took a while but i think the glass capsule is well worth it.
Whilst it takes away the stealthness of the unit when out, the flavours and effect is much more my cup of tea :) Although i am at present trying to make a wooden sheath to insert the glass into, i'll post pics if it turns out any good, it's a dark bog oak so shouldn't look too weird!!
I found with the Polymide capsules i was getting too medicated, i know i could leave some and come back but it's just not in my nature, and we weighed the herb going in and it was .2g which is too much for me i reckon, the glass holds less than .1 and i'm able to operate in the day :)
At the end of the day it is 'different horses for different courses' as we say over here but i will not go back from the glass unless i break it and have to!!
 
Ruta,

Drbillcat

New Member
Its been one month since i sent back my 3rd problematic unit for replacement to inhalater and they keep saying no news and nor replacement is sent yet to me...so i bought one unit and paid extra money (a lot) 2 times to get an upgrade (which was my only option on repairing my unit) and now i am without unit again. This is very irritating and i feel like i have been almost robbed. I am expecting the company to find a proper solution and not tell me to pay 200$ again for replacement when its not my fault the units stop working after some months...

I just checked the tracking number and the problematic unit i sent back arrived to them before exactly one week and since no answer from them...
 
Last edited:
Drbillcat,

TransHumanC

Inhalater shill account
@Ruta Soo cool for the sheath. Love to see some picks of that.

The cleanliness of the vapours are paramount to the effect. Too medicated is because of the microcumbustion in the vapours.

Try this: Fill the glass capsule and insert it the unit. Set temperature at 1 and let thing sget up to temp.

When ready. crank the unit at 8-9, wait for the temperature to reach and stabilise. Inhalate. This will yield ultra pure medication in one dose.

Edit: Using low temperature and waiting longer is another great way
 
Last edited:

Old School

Vape13man
Hi all, I wish I could get a glass capsule for my Inhalater, I looked at the official website but I charge $ 60 Shipping !!! is theft, with that I could buy many capsules!
Do you know of any other place where I can get with affordable shipping?
Listen if the effort becomes to great you should check out my post in the XP thread and if that looks like something you could handle here is a link to the the homemade glass caps.....
I used a small o-ring to hold it in with the XP version but with the 05... I simply use the WTA to hold them in securely.... works great..... in the beginning...YES I dropped a few.... but after you train yourself to be more careful....they last and clean up is so easy.... the only long term issue is keeping the screen inside clean......speaking of the screen I have just recently caught word of these doomed screens that might be nicer and easier to shape to fit snugly on the inside walls of the glass tube....:peace:

Could I suggest that you might very likely have more medicine to be had than just the single inhalation... next time towards the end of your inhalation try rolling the temp back down to say #2 or #3....collect and ready yourself for your next inhalation {dose} When ready.... repeat your process..... then in preparation for your 3rd inhalation roll it back to say #4 or #5.... When ready... repeat your process again....etc... 4th might be #5 or #6 to rollback...:peace:
 
Last edited:
Old School,

CapitalFlower

Well-Known Member
Hey guys,

Hows this new INH coming? Is the battery issue sorted yet?

I saw a vendor offering a 'supercharged' version of it, can someone shed some light?


Also, how does it stack up to the identical-looking Arizer Air?

I've noticed a few more vapes coming on the market such as the Alfa, the Crafty and the Haze... All look like good contenders
 
CapitalFlower,

Old School

Vape13man
Hey guys,

Hows this new INH coming? Is the battery issue sorted yet?

I saw a vendor offering a 'supercharged' version of it, can someone shed some light?


Also, how does it stack up to the identical-looking Arizer Air?

I've noticed a few more vapes coming on the market such as the Alfa, the Crafty and the Haze... All look like good contenders
I too have been keeping an eye on these other vaporizers too..... but nothing has convinced me to pull any triggers yet.....although I will say the closest one for me would be the AA..... the thing is this manufacturer has a slightly differing business style....as they like to evolve their design as they go forward.... and thus far for the most part most all changes have been for the better..... and they do accept input from users / consumers......

For example the "Supercharged" version you asked about......also referred to as the "S" mod was born from the effort to increase the convection properties and as a result a whole 2nd heating element was added which bumped up power and reduced heating time...... very cool.....

I'm also hearing some rumblings about some sort of Turbo charged booster feature in future works....

Yes the battery issue was resolved with a better quality fuse {I have faithfully been enjoying 6 hr charge from flat}...
They have also addressed the plastic melting issue and there was a short Thermal protection issue that was also quickly resolved.... and they have just recently come out finally with some glass capsules....

I happen to have the INH05 "S" mod and I just love it.... plenty of power..... in fact just a small learning curve adjustment to the way I went about the higher temps but other than that its an absolute "Monster" :peace:
 

killick

But I like it!
I concur with @Old School. I had a few adoption pains when I first got my INH, but I don't think I could be without it now. It was a DD for a couple of weeks and performed flawlessly. I just sold it to a friend, and swapped to the S, and thats even more of a face-melter for me, especially through water.

From an additional vape perspective I *still* want a 'portable' unit, and just pulled the trigger on the Minivap for that gap. That gives me a trusty S for out and about sessions, the Minivap for wandering around the house/yard and having a leisurely vape with nature, or in the cupholder on lawntractor or atv. For hanging on the PC I have a Heat Island thats always on. I also use the INH indoors through water, a lot. At heat and through water the S is really a 'monster' :)

So with this triad I'm ready for the world :)
 

Edward Hyde

Well-Known Member
Hey guys,

Hows this new INH coming? Is the battery issue sorted yet?

I saw a vendor offering a 'supercharged' version of it, can someone shed some light?


Also, how does it stack up to the identical-looking Arizer Air?

I've noticed a few more vapes coming on the market such as the Alfa, the Crafty and the Haze... All look like good contenders

My experience with the inhalater was that i bought it once and every 8 months it kept breaking and the company told me to pay money for an upgrade and this happened 4 times,sending back and forth units paying shipping upgrading etc. Two friends of mine that we bought them together had exactly the same problems and now their units stopped working again.one was offered again to pay for an "upgrade" and the other was told to send back the unit and it will imediately be replaced and when he sent the unit they told him we arent sending you anything because its not repairable. My unit stoped working as well and i am not willing either to send it back so they tell me i aint getting nothing nor having to pay 200$ again to replace an 8 month old unit.Untrustworthy company after all not worth the money i spent on them.
 

killick

But I like it!
Well, if you don't want to send it back for repair, and you don't want to buy another one, I guess you are kinda stuck with it in that case.

I had a couple of issues with my first one, but they were fixed properly and I'm now a huge fan of the device. It's unfortunate our experiences vary, but if you don't send it back for repair it won't get done. Maybe it will magically fix itself sitting in a drawer?
 
Top Bottom