Open Source Glass Thread

grdwaste

Glass Psycho
I ordered a 710 last night. So looks like I have a month-ish wait? Can. Not. Wait. Will be my first oil rig. Pretty new to the oil game. I have just been dabbing on an rda coil or other vap attys. I have a cheap bong I used for combustion (no more) that I wasn't thinking of converting, but when I saw this thread and the prices I went with it. Plan to get a blow torch soon and then build an enail when I get some tax monies. Looks like I might have the nail build before the pipe arrives (well if I get off my butt and do the damn taxes).

How is the glass nail that comes with it. I'm still research in the type of nail I want to get. Any suggestions. Was just thinking about a quartz domeless. Guessing I should look for ones that are the right size for the coil I will use.
I wouldn't use their nail. Pretty sure its glass and you were spot on with the quartz banger. By far the most flavorful and efficient nail in my opinion.
 

MuushuPork

Well-Known Member
After a few dabs with the 710 last night I will agree with everyone here and say the performance of this piece is great and the flavor is amazing.
Just for shits and giggles I thought "I wonder how it would pair with my Nano".
Well surprise surprise it pairs great with the nano. The flavor is so good just like @canj00digit I to am now thinking about picking up another one just to Vape out of.

5k4Xkfk.jpg
I only use mine for concentrates with the enano. Cant imagine doing things any other way for the foreseeable future.
 

blankrider

Well-Known Member
Hey guys sorry for my absence. I have been busy working and shoveling and getting high and shoveling some more.

I am excited to hear all the positive reviews about the 710. Mine still has not arrived. It obviously took the slow boat and I was the very first order but whatever.

About the Torus, I have sent a bunch of messages to Steven trying to explain how to make it right. Sometimes communicating with him can be very difficult and confusing. I think I have finally gotten the point across after showing him a D-cycler. No matter how many Torus or efs incycler I showed him he didn't get it. He actually told me that the model he sent to MS company had 2 hole perc. He thinks he produced glass for mothership. I tried to explain to him that was impossible and probably just someone selling counterfeits but I don't think he gets it.

He confirmed that they will have carb caps when they produce ms mini style piece but he has not provided pictures.

I talked to him about lower prices. It seems like they are set but also sounded like he was willing to cut deals to FC so I will get back to you guys about that.

@hd_rider and others interested in the FC-UFO here is prototype 1
other_979872059_00.jpg


if I forgot to respond to anyone please tag me and I will bring everyone up to speed the best I can
 

Kief

Medicated
@hd_rider and others interested in the FC-UFO here is prototype 1
other_979872059_00.jpg
I'd like the mouthpiece to be a few inches longer please... long enough to keep my E-nano below my chin. It's about ergonomics to me, holding anything above my chest is uncomfortable for my back and shoulders. Leaning over a desk is not an option, I need to sit up straight and hold my vape and bubbler below the top of my sternum to be most comfortable. This may be a good time to dig up the old PV bubbler thread, it had some great mouthpiece discussion going on.

If this new FC-UFO does not have the perfect MP for me, I'd probably have one made locally... but that would almost double the cost. Silicone tubing is not bad when it's used after a water perk, but I still prefer glass.

Thank you @blankrider for your time and effort put into making all of this FC designed glass a reality.
 
Last edited:

alltoreup

Damn you, party liquor
And make the tubing of the MP the same size as the tubing coming off the can. That is also making it look small. I see some rolling going on in the edge of that MP. Bravo! Getting closer. Just don't flare it any bigger whatever they do.
@blankrider our FC710s are most likely together on the slowboat. I think I was #4 to order so those early ones must be lost together. Or being tested at customs:brow:
 

fcdeady

Well-Known Member
@hd_rider and others interested in the FC-UFO here is prototype 1
other_979872059_00.jpg


if I forgot to respond to anyone please tag me and I will bring everyone up to speed the best I can

I love it! Count me in! It's probably easier to transport than a piece with an attached MP. It looks solid and I like the wide base.
I would love to use this with some tubing + MP + this wine stopper that some members mentioned earlier. I would definitely purchase the silicone tubing separately though.
Is a showerhead perc more desireable than a matrix perc? It might be easier to produce evenly / cheaper / preserve more flavor? I love the pull on my FC-187, but there's not much of a difference between showerhead and matrix perc I guess. I'm looking for maximum diffusion, flavor is negligible for me.
ETA after CNY? Thanks for making this happen blankrider!
 

snackmaster

Well-Known Member
@hd_rider and others interested in the FC-UFO here is prototype 1
other_979872059_00.jpg

This looks really nice, but I wanna suggest a minor tweak. I've got the Jhan bub with the UFO perc and although it doesn't stack quite like a matrix, some water does get up into the MP. I'm a little worried the lower MP on this prototype would let even more in. If the support was reoriented the MP could be placed higher and less water would get into it. Like so:


Thoughts?
 

Kief

Medicated
This looks really nice, but I wanna suggest a minor tweak. I've got the Jhan bub with the UFO perc and although it doesn't stack quite like a matrix, some water does get up into the MP. I'm a little worried the lower MP on this prototype would let even more in. If the support was reoriented the MP could be placed higher and less water would get into it. Like so:


Thoughts?
Yes, put that on the list too... if it's possible.
 

cybrguy

Putin is a War Criminal
This looks really nice, but I wanna suggest a minor tweak. I've got the Jhan bub with the UFO perc and although it doesn't stack quite like a matrix, some water does get up into the MP. I'm a little worried the lower MP on this prototype would let even more in. If the support was reoriented the MP could be placed higher and less water would get into it. Like so: IMAGE


Thoughts?
I like the idea. I'm not sure how well a support below the joint would work for it's purpose...
 
cybrguy,
  • Like
Reactions: nihil

Dramma Lamma

Looks like a job for!
@PoopMachine Raised a valid point and design idea for the drop-down reclaim catcher in the next gen enail thread, page 23.

Here is the original picture:
CCF01272015_00000.jpg


I personally like a bit more symmetrical and smooth design so here is my pitch:
6hZWaVR.jpg

I also think keeping it all one tube instead of 2 offset tubes around a central one might make it more simple to keep it all flat and level, even if my drawing isn't quite there:cool:.
 

MGG

Well-Known Member
I had been asking him for a water test of his 3rd prototype 242 but for some reason he put up one with the 2nd prototype. Please disregard this video. Hopefully he will post the right one soon

this looks pretty sick but i think we all agree the perc needs to be way higher in the chamber [above the bottom recycling path].

also off topic has anyone seen this, because it's actually hilarious.. i actually think these guys know absolutely nothing about waterpipes or smoking

honestly i'm actually more interested in a piece with a bigger chamber, that's what all these dhgate pieces lack imo, they are great if you're into oils but asides from that they aren't that great for use with the sublimator.. though that being said i really appreciate the work everyone is doing and these new pieces are showing a lot of potential but their chambers are all still super small if you actually look at them closely.
 
Last edited:

alltoreup

Damn you, party liquor
Finally...my FC710 all of a sudden updates that it is at my local PO. First tracking update since China. 30 days it took. Hopefully it's in one piece, but at least it's not lost.
 
Top Bottom