• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

Tweak

T\/\/34|<
Glad to see some 710's moving.

I see the GB-187 is back in stock. Did he do it with the release of the GB-187-S?

Ugh, I have GAS but don't really want anything but a Matrix Pillar (and a Nikon D810, ;)). The atomic perc is on my list but I'm not really sure if I'll like it.

@jambandphan03 really seams to like her atomic perc. Is that your daily driver now?
 

Nugg

Well-Known Member
I got my FC-710 today. I re-order on the 22nd and got it in Australia on the 5th. Packing was pretty good.

Its very well made. Mine doesn't have any bubbles or cracks and nothing is noticeably crooked. The dome is a bit oval shaped at the top. The low side of the angle cut is lower than the top of any nails I tried in it. Lucky I have a banger to use with it.

I wasn't sure what to expect the perc to feel like. I like the little rumble it has. I does take a little bit to get it going tho.

All in all I'm very happy with this purchase and it has restored my faith in Steven.
 

little maggie

Well-Known Member
I think shipments sometimes fall off the conveyor belt at the border and nobody bothers to pick them up for days/weeks.

I had ordered 5 times from Sunshinestore with fast shipping every time (8 days is my best record). On the 6th order of a YQ-42 for my friend's birthday, the package was lost for a month - tracking showed it had left China, but no further update for over a month. Finally it started moving again and was delivered 3 days after tracking was finally updated.
I've been wondering about my order from Sunshine. My glass order hasn't hit the US yet. Last time I bought from the it came fairly quickly. There's a post on DH Gate that nothing is going to be sent out during a couple of weeks in Feb because of a holiday. I hope my order comes in before that. My DH20, unfortunately has a wong permanently stuck in it so I can only use it with 1 vape.
 
little maggie,

063_XOBX

Ganjapreneur
I think ours are on the same rickshaw. Mine updated today as well. Arrived in NY.
I figured Jackie Chan was kicking them across the ocean or something. My D-cycler knockoff must be in the same hands as all of your 710s.

jackie-chan-illuminati.jpg
 
063_XOBX,
  • Like
Reactions: nemo

Vitolo

Vaporist
My Bubbler from "Thick Ass Glass" broke a few days ago, and they no longer sell that model.
I found them on DHGate and ordered one.
The picture of this particular "5 arm perc" are all identical to the one I own, however I received one that is not the same...
Taller and without a widened base...
More water required to reach the slits.
It appears as though the whole thing was supposed to be heated and "squished" at the base somewhat.
The seller has gotten back to me, and I could not upload the images to the DHGate website....
I made this post so I could give them a link to see the images.
eeee.jpg

qqq.jpg


The girl is offering to send me a partial refund... if she can not find me a bubbler like the one I want.
http://www.dhgate.com/product/two-f...e-percolator/210580147.html#s1-0-1|3206309548 is what I ordered.
That image remains on the website, but she says there is a different distributer now, and that piece is different.
My thinking is that she should change the picture on the website!
In any event, Alicia seems to be genuinely interested in helping me get what I ordered.
Alicia, while appearing willing to help, can not help me, it seems.
I am recommending all to avoid doing business with
beauty_center, as they will not help.
They told me that they can not replace my pipe with the correct one due to Chinese New Year,
and I was offered a $10 partial refund on the $26.14 I spent.
I did finally try to use the pipe. It was difficult because it would not stand up without being held, and to top that off three of the five arms were glazed shut!
 

alltoreup

Damn you, party liquor
My Dcycler arrived today! I was hoping my fc710 would sneak in with it but alas nothing. I got the Dcycler from growhighglass aka cleanclearglass (had cleanclearglass on the shipping label even) and it came with a ceramic nail and carb cap and my very own sweet puff meth pipe for free, lol. Seems to be about as thick as my gb242 but not as thick as say the 187s. Slits are flame polished and every weld is clean. Probably the cleanest China piece so far. Going to give it a clean and try it out. Definitely pleased so far.
 

grdwaste

Glass Psycho
My Dcycler arrived today! I was hoping my fc710 would sneak in with it but alas nothing. I got the Dcycler from growhighglass aka cleanclearglass (had cleanclearglass on the shipping label even) and it came with a ceramic nail and carb cap and my very own sweet puff meth pipe for free, lol. Seems to be about as thick as my gb242 but not as thick as say the 187s. Slits are flame polished and every weld is clean. Probably the cleanest China piece so far. Going to give it a clean and try it out. Definitely pleased so far.
Very interested in this piece
 

Erwin

Well-Known Member
Ok, pulling the trigger on a GB-187 since Yingmin's got em back in stock. I figured that despite all the rest of my glass, my d020-D is still my daily driver and given that I might as well give it an upgrade :rockon:

Things just got tricky, however, when I realized that yingmin has 2 different GB-187s, one with the label and one without. After noticing this picture I wrote him to confirm, and they are indeed actually two different pipes.

rBVaGlRZ6D6ADuARAAEMk4bgqRc989.jpg


The one with the logo looks like a much nicer build: slightly larger with a bigger base and a clearly more intricate perc. However I obviously don't want that crappy logo muddling up my glass. :disgust: I've never tried using simple green or anything else to remove labels, but would generally prefer to avoid soaking anything I vape through daily in chemicals, "natural" or not...

Those of you with a GB-187, which one do you have and do you like it? Does anybody by any chance have both? Is it worth figuring out the label removal for the slightly nicer piece? And while I'm at it, how do they stack up to the d020-D? Worth the upgrade? Thanks!

:cheers:
 

EverythingsHazy

Well-Known Member
TBH, idk why people hate the logo's so much, when they aren't the wrong ones. Sure they aren't legit, but if a Mobius knockoff has a nice "Mobius" logo, it doesn't look bad. If it says RooR, it does.

It's like most knockoff stuff. Take shoes for instance. Fake Jordan's look nicer with a Jordan logo than without, but they'd look stupid with a Rebook logo.


For me, it's the wrong logos, random rasta coloring, and colored glass that look bad.
 
EverythingsHazy,
  • Like
Reactions: ctxgooner

Frederick McGuire

Aggressively Loungey
More Gifs :science:

Time lapse of the heating of my banger:
e7c7c06fe91cf41af209d8b59ffd0d66.gif

Edit: picture of the dab :D
jK1Dbe.jpg
The dab:
fc2f2d165b0e9bad13f8dd0cb553bce1.gif
My "carb cap" had a little bit of reclaim on it so that's why there's a bit of vapor already in there.

Obligatory endless dab:
893b5e3d18fa230d9649fe0fa557c2f3.gif

Can't really see the ball moving.
Yup, I checked the vid, and the ball was just straight up the whole time I was pulling.

It's a bit hard to see in the gif, but in the video of the dab I can clearly see the ball bouncing around, so I'm thinking I was probably just pulling too hard for the water test gif.
 
Last edited:

hanfhead

is high
Top Bottom