• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

JDSupreme

Head of Pot
Bun.it said:
Ok thanks was just checking it's normal. I get more than a few crumbs in there but that is only when its really fine and I'm walking with it in my pocket.

If you can try carrying it "draw hole down" that may help.
 
JDSupreme,

weedemon

enthusiast
Bun.it: that's an easy fix, just give your box a quick powerful hoot! you will pull the herbs back into the right part of your box.
 
weedemon,

mvapes

Scratchin' Glass!
Accessory Maker
Blood420 said:
Irie said:


Cool! But how water resistant is the magic flight, could water contact possibly damage the batteries? I do a bit of kayaking myself, I was just gonna get a dry bag for it!

To answer an earlier question, it takes me about 4-5 tries to vape a trench mostly brown. I like to take big hits using the "microsipping" method, or whatever it's called! I see some of you guys are getting like 12 hits out of a trench? Man I wish I lived in or near an MMJ state :lol:

Also, this may be a silly question but can you charge them Powerex 2700's in the charger that comes with the Magic Flight?

Water will warp the box, DO NOT GET WET! I learned that the hard way.
 
mvapes,

cluffy

Vaker
cluffy,

SF Giant

Reluctant vape collector
cluffy said:
wot said:
Hey all, I just wanted to report on cleaning gunk off the plexiglass. I applied a little toothpaste to the offending area, rubbed it down in a circular motion (yeaaa baby) with a damp paper towel and voila! There's still a little residue but no biggie.

Before
http://img689.imageshack.us/img689/5131/mflb.png

After
http://img854.imageshack.us/img854/4876/mflbafter.png

Very nice. I was just going to use some Everclear, but I have trouble getting a round tuit.
Just a guess but everclear may cloud up the plexiglass
 
SF Giant,

darkrom

Great Scott!
SF Giant said:
cluffy said:
wot said:
Hey all, I just wanted to report on cleaning gunk off the plexiglass. I applied a little toothpaste to the offending area, rubbed it down in a circular motion (yeaaa baby) with a damp paper towel and voila! There's still a little residue but no biggie.

Before
http://img689.imageshack.us/img689/5131/mflb.png

After
http://img854.imageshack.us/img854/4876/mflbafter.png

Very nice. I was just going to use some Everclear, but I have trouble getting a round tuit.
Just a guess but everclear may cloud up the plexiglass


It will. Don't use a solvent on the plexi. Toothpaste seems to have done the trick. Personally I clean my lid with a drop of water (don't let it touch the wood) and some elbow grease.
 
darkrom,

Vitolo

Vaporist
I do my plexiglass with a touch of saliva and a clean cotton t-shirt edge. It gleams!
hint- paper towel can scuff plexiglass.. and some cleaners will dull it.
 
Vitolo,
:( Guy's what am I doing wrong???? I freshly charge powerex batteries add a fresh grind of some good quality strawberry diesel and start it up with little to no vape cloud. I have watched and read the proper way's to "kiss" the box as well as tried w/ and without the stem. The light is coming on little vape forms but that is about it. The real kicker is I see a few vids on youtube with the water adaptor cranking out thick clouds.... please help.
 
Willuminati,

Vitolo

Vaporist
Patience.. watch the vids.. very rare that an individual has immediate success.
Take your time.. you will be playing that thing like a "Sax" in short order.....
Please don't rush the learning process... enjoy it so that one day you can think back to today... and smile.. and say to self... "I remember learning........" ;)
 
Vitolo,
I am trying V and thank you for the positive words. I have owned the MFLB for a while I just sort of put it on a back shelf to my VaporBrothers but the other day I went to the Drive-In theatre with my girlfriend and well lets just say the bright green and blue L.E.D's shining off the bottom posed a bit of a problem. That is when I decided to order the power adaptor. In hopes that one day I may get quality hit's that I am trying so hard for.
 
Willuminati,

JDSupreme

Head of Pot
Willuminati said:
I am trying V and thank you for the positive words. I have owned the MFLB for a while I just sort of put it on a back shelf to my VaporBrothers but the other day I went to the Drive-In theatre with my girlfriend and well lets just say the bright green and blue L.E.D's shining off the bottom posed a bit of a problem. That is when I decided to order the power adaptor. In hopes that one day I may get quality hit's that I am trying so hard for.

Click the YouTube link in my sig. The one WPA video i use both batteries and the PA. You don't need the pa to get good hits. Make sure to watch "keys to proper vaporization" video too to help with your technique

hell watch all the vids u can't get too much info lol
 
JDSupreme,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Willuminati said:
:( Guy's what am I doing wrong???? I freshly charge powerex batteries add a fresh grind of some good quality strawberry diesel and start it up with little to no vape cloud. I have watched and read the proper way's to "kiss" the box as well as tried w/ and without the stem. The light is coming on little vape forms but that is about it. The real kicker is I see a few vids on youtube with the water adaptor cranking out thick clouds.... please help.

If the techniques suggested by JD and Vito aren't working for you, try the test described here:

How can I tell if my Box is running too cool?

A cool box is a warranty issue.
 
pakalolo,
Willuminati said:
:( Guy's what am I doing wrong???? I freshly charge powerex batteries add a fresh grind of some good quality strawberry diesel and start it up with little to no vape cloud. I have watched and read the proper way's to "kiss" the box as well as tried w/ and without the stem. The light is coming on little vape forms but that is about it. The real kicker is I see a few vids on youtube with the water adaptor cranking out thick clouds.... please help.
lol paitence. I know I don't have it either. I actually was going to sell my box. I had it for like 6 months trying everything and I just couldn't get it. Finally I had a break through. The key(this is how I explain it to someone that has never seen or used one) is to take those little vapor hits and combine them into one big nice hit. You need to hold the battery in for however long it takes the box to fill with vapor and make it to the stem and almost come out. Then you suck that in(still holding the battery in) very lightly and let the box fill to that point again. Release pressure from the battery and draw the rest out continuing to draw even when you thought it was cleared all the way. Shake the box excessively(I usually bang the top kinda like people that dip tobacco do it with the container) to make sure its all mixed up and not sticking to the trench. But remember to save breath because if your like me you will need to do exactly what I just explained 4 more times lol. Hope that helped.
 
VapeNStone,
Thank you all for info. have any of you run into a "cool box" problem? you guys have already been a great help and I will continue to work on it a bit more.
 
Willuminati,

Vitolo

Vaporist
yes... and do not exhale to check your vapor as you go.
take tons of tiny little hits, and fill your lungs..... stop and shake while holding breath, and continue.
We are all behind you wanting you to get that first "Ahaaa!"
 
Vitolo,
I can't thank you all enough for the fast responses. I am working on it a little at a time. I am not going to give up yet.
 
Willuminati,

JDSupreme

Head of Pot
Willuminati said:
I can't thank you all enough for the fast responses. I am working on it a little at a time. I am not going to give up yet.

never-give-up.jpg


hahaha classic.
 
JDSupreme,

kewpcer

Active Member
If your herbs are getting brown and you're getting vaked, then it's working fine.

Yeah, JD, Vito and a few others can blow clouds with theirs, but that's like riding a wheelie. It's fun, but it ain't the only way to get to the store.

Hell I still have lots of hits where I miss the rhythm and don't get a lot of visible vapor.
 
kewpcer,

aesthyrian

Blaaaaah
Bun.it said:
Does anyone else loss herb in the small groove on the top?

Only when transporting a loaded trench. No matter what it happens and I have just decided to accept it as part of the MFLB experience.
 
aesthyrian,
Kew I would agree with you but the herbs are not really getting brown and I am not getting vaked... I think i am going to see if I can get a temperature reading with one of those thermal meters you point and pull trigger.
 
Willuminati,

RumbleShorts

Active Member
Willuminati said:
Kew I would agree with you but the herbs are not really getting brown and I am not getting vaked... I think i am going to see if I can get a temperature reading with one of those thermal meters you point and pull trigger.

Willuminati,
Have you tried running a battery for 1-2 minutes with an empty box to check how much heat you are producing? you should be able to use your finger and feel the heat off the trench. Also the bottom of your box should get pretty warm to the touch.
When I first got my box I thought it was an "underpreformer" as well. I know that mine doesn't run as hot as JD's or Vito's. Eventually I just said forget it and decided to combust a trench just to make sure my box could. It took some time about 50 secs but it did start charring. That put my mind at ease and restored some confidence.
I'm still working on technique but at least I know the box is working. Hope you can get yours going to your satisfaction.

PS. After the charring there was a black circle even after brushing. It went a away after a couple days of normal use. Or you can use the PA/ Batt to cook it off (or at least make it uniform color again) by running empty for a minute or two.
 
RumbleShorts,

SecretStoner

Well-Known Member
I've lost my magic flight! :(

I was just wondering, does anyone know of somewhere online where i can purchase JUST the MFLB without the entire kit, as well as the OEM/nano grinder? I've found a few places that have the MFLB for cheaper without the kit, however, i want to make sure that i receive the newest version with the click lock. If i am to purchase it online through amazon, i'm afraid i'll end up with an older model. i already have powerex batteries, a charger, case, etc.

Blissville, puffitup, vapeworld, and magic flight are all selling the kit only. amazon has some for 90$ that are no-kit included, but like i said, probably old models.

TY,
SS
 
SecretStoner,

stroh

errl enthusiast
SecretStoner said:
I've lost my magic flight! :(

I was just wondering, does anyone know of somewhere online where i can purchase JUST the MFLB without the entire kit, as well as the OEM/nano grinder? I've found a few places that have the MFLB for cheaper without the kit, however, i want to make sure that i receive the newest version with the click lock. If i am to purchase it online through amazon, i'm afraid i'll end up with an older model. i already have powerex batteries, a charger, case, etc.

Blissville, puffitup, vapeworld, and magic flight are all selling the kit only. amazon has some for 90$ that are no-kit included, but like i said, probably old models.

TY,
SS

contact blisssville.com for a bare box, it costs 67 dollars, shipping is free
 
stroh,

JDSupreme

Head of Pot
RumbleShorts said:
When I first got my box I thought it was an "underpreformer" as well. I know that mine doesn't run as hot as JD's or Vito's.

Do you have the PA? Has your box been used alot?

My older one doesn't get quite as warm as quick as my newer one, but it basically works the same. I figure its due to buildup inside.

If you are just using batteries its very possible its your batteries not the box not running hot.
 
JDSupreme,
Top Bottom