The Arizer Air

olivianewtonjohn

olivianewtonjohn

Well-Known Member
DJ Colonel Corn said:
... works great, @olivianewtonjohn , as you can see in the picture of the original post of mine.
Works really great. #7 O-ring placed on end seals the deal.
I always use the short stem and PNWT combo with my Air ! :rockon: :horse: !
Click to expand...

Picture shows the short open stem not the "ecig stem". So without o-ring it does not seal? Ecig stem seemed to work fine on the 14mm piece I tried, but chinese glass sometimes has weird joints so I just wanted to check?
 
olivianewtonjohn,
  • Like
Reactions: SSVUN~YAH
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
olivianewtonjohn said:
Picture shows the short open stem not the "ecig stem". So without o-ring it does not seal? Ecig stem seemed to work fine on the 14mm piece I tried, but chinese glass sometimes has weird joints so I just wanted to check?
Click to expand...
My DH tube has a little wiggle but works fine. The joint is a bit more recessed than the PNWT joint so the mouthpiece will go in a bit further. Both work great with my air, though two hands is recommended. However, not near as trusty as a proper gong aka Edstnt, Yoda & PV, it will surely work.
 
DJ Colonel Corn

DJ Colonel Corn

The Vapor Ninja
olivianewtonjohn said:
Picture shows the short open stem not the "ecig stem". So without o-ring it does not seal? Ecig stem seemed to work fine on the 14mm piece I tried, but chinese glass sometimes has weird joints so I just wanted to check?
Click to expand...

... 'ecig stem' ? You can't mean the plastic mouthpiece'd one, do you ?
I only got 1 short mouthpiece and 1 short straight stem with MY air, as I posted here....
So, not sure what you mean.
P.S.: yeah you pretty much need the O-ring, it seals and also holds it so you don't need 2-hand tech...
P.P.S. Yay, page 100 on the Arizer AIR :) he he.... keep it up guys n gals
 
Last edited:
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
It's a well made portable no parts that will get cracked due to brittle plastic. It seems to be well made like the Solo. I've been happy these past 2 months with my purchase. It works well with WTs too.

Vape on friends.

Is the sale still on at Puffitup? code: Air?
 
Last edited:
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
stark1

stark1

Lonesome Planet
DJ Colonel Corn said:
I always use the short stem and PNWT combo with my Air ! !
Click to expand...

Looks like we have twins!

PPWT goes well the short stem.

However, unless I want to look like a dork who me! is about to savor some free meals in the local jail, I best do it indoors.

Works great with a flask bubbler, too. Again, indoors.

Am going to jerry rig up something small with a small test tube.

Really tho, the Air is sufficient unto itself, but it's fun to " experiment ".
 
Barhen

Barhen

Well-Known Member
Justpassedu said:
Hey all just made a quick video , I used my new Joda Glass Work's 18mm gong attached to my Air and Infamous Bubbler . It does milk the bubbler like crazy but the amount of vapor i get from a hit is insane.
Click to expand...

you were hanging on to the gong, is it not tight enough? it looked like it was going to fall out if you let go.
 
Barhen,
DJ Colonel Corn

DJ Colonel Corn

The Vapor Ninja
Justpassedu said:
Hey all just made a quick video , I used my new Joda Glass Work's 18mm gong attached to my Air and Infamous Bubbler . It does milk the bubbler like crazy but the amount of vapor i get from a hit is insane.
Click to expand...

Hey great little video. Gave me an idea which I dunno WHY I didn't think of.....
Hooked up my Air to my little DHGate bubbler (piece #179567923), and oh it works great.
Nice, nice action. Thanks for jogging my brain, @Justpassedu .
Here's pic of mine. The original post regarding the bubbler can be found here.

air-w-bubb.jpg

Arizer Air with DHGate bubbler #179567923
​
The #7 O-ring you see is not completely necessary, but always helps ! Fits sturdy, not loose at all, with or without o-ring.
Thanks for all the great posts, everyone !

​
 
Justpassedu

Justpassedu

Well-Known Member
Barhen said:
you were hanging on to the gong, is it not tight enough? it looked like it was going to fall out if you let go.
Click to expand...
Yeah the gong was original designed for the solo but had a very tight fit. I had joda glass works make them a little smaller but they are now a little bit to loose. Joda doesn't have the tool to make them the exact size for the air so holding them is my only option or else it will prob fall out. It works great though and hits well as you can see in the video. Just a heads up if you decide to order from them.
DJ Colonel Corn said:
Hey great little video. Gave me an idea which I dunno WHY I didn't think of.....
Hooked up my Air to my little DHGate bubbler (piece #179567923), and oh it works great.
Nice, nice action. Thanks for jogging my brain, @Justpassedu .
Here's pic of mine. The original post regarding the bubbler can be found here.

air-w-bubb.jpg

Arizer Air with DHGate bubbler #179567923
​
The #7 O-ring you see is not completely necessary, but always helps ! Fits sturdy, not loose at all, with or without o-ring.
Thanks for all the great posts, everyone !

​
Click to expand...
your welcome man enjoy , looks like a nice setup you got going there.
 
Vapoleon

Vapoleon

Vapoleon Bonaparte
Another good comment on VAPEFIEND :)

"
Hands down. The best
Ben - Today, 15:10

I have the pinnacle pro, flowermate 5s, MFLB and the mighty, they are all great vapes but each one has some type of flaw which makes it just less than perfect. The Arizer Air is the first vape that ticks all of the boxes for me, I struggle to find any faults with it. It has a great draw, nice heat, superb flavour, INTERCHANGEABLE BATTERIES!!! and a great look and feel. If i had to give all of my other vapes away to use this... i would, 100% the best
"

Cant wait to could buy mine when price goes down a bit:science:
 
Barhen

Barhen

Well-Known Member
CarolKing said:
The Planetvape PVHE GonGs for the Solo work out great, quite often they are sold out. Go with JoDa Glass he is a fellow FCer
Click to expand...
Can't decide which one. Standard or turbo... Never bought a gong before so I have no idea the difference..... which is optimal for a bubbler, or fbomb type glass? Pros and cons on standard vs turbo? Air users, enlighten me please :-D
 
Barhen,
  • Like
Reactions: jojo0420
jojo0420

jojo0420

Cloud Chaser
@DJ Colonel Corn thanks for the tip on the o-ring!
I am waiting (not so patiently) for a Solo GonG from PV, and have really been missing the water filtration I'm used to. So after reading your tip I pulled out my box of paraphernalia and found some spare o-rings from my Lotus, not the right size most likely, had to stretch it on slightly but it works great for helping seal my short glass stem to my PNWT and bubbler.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
It's your call about PVHE GonGs.

PVHEGonG Features:
  • same bowl size as a standard stem
  • micro channel technology
  • multiple air entry points
PVHEGonG Shorty
  • 30% smaller bowl size
  • micro channel technology
  • multiple air entry points
  • deeper heat penetration for more thoroughly extracted botanicals
  • overall adapter length remains unchanged from non shorty
Turbo Option
  • Large Single Bore with a glass rim to hold the required screen
  • micro channel technology
  • multiple air entry points
Includes:
  • (1) x PVHEGonG of your choice
  • (1) x Custom Solo Stainless Steel screen

If I were you I would buy more than one and see which you prefer. These fit the Solo, but will work for the Air too.

I hope that's not too confusing. Check out Planetvape at the bottom of the FC pages. Or talk with JoDa glass, he's doing some special stuff.
 
Last edited:
You must log in or register to reply here.
Top Bottom