• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

The Mighty/Mighty+ by Storz & Bickel

t-dub

Vapor Sloth
Does anyone own a Mighty with the serial number in the 4000 range and does it work/heat while plugged in with a fully discharged battery?
Mine works correctly but the serial number is MY002238.
 
t-dub,

magpie77

Well-Known Member
I have to ask this again if anyone is able to help. Does anyone own a Mighty with the serial number in the 4000 range and does it work/heat while plugged in with a fully discharged battery?
Hi mate my serial number is 000418 had it from day one it works perfect plugged in with discharged battery,though I never let it run down that low,I charge it up after two or three bowls
 

mixchu69

Well-Known Member
It doesn't have a true pass through for power. If you completely discharge it it will require a slight charge before it will function. It's just the way it is. Thankfully a minute or two on the charger is enough to get it past the threshold. If your sending it back for this reason I think your wasting yours and s&bs time.
That I am wasting my time and s&b's is a naive comment. S&b makes their money off customers and customer service is paramount in business that sells vaporizers. I don't know if it will be a waste of my time, haven't calculated the amount of time and the opportunity cost of me conducting and working my book of business.

It always seems that "people like you" who have working units don't care about others who are not satisfied. I have found this site extremely helpful and FC members helping and sharing their experience. I can not judge you, but from that one comment it seems like you live in a bubble thinking that your experience should transpire to the rest of community. And say 'don't waste S&B's time' still baffles me.

Do you know how they run their business? Do you know the business overhead expenses of retaining customer service employees?

Or do you live in a world where you think you know about everything?
 
mixchu69,
  • Like
Reactions: Jherst

elmomuzz

That just happened...
a
That I am wasting my time and s&b's is a naive comment. S&b makes their money off customers and customer service is paramount in business that sells vaporizers. I don't know if it will be a waste of my time, haven't calculated the amount of time and the opportunity cost of me conducting and working my book of business.

It always seems that "people like you" who have working units don't care about others who are not satisfied. I have found this site extremely helpful and FC members helping and sharing their experience. I can not judge you, but from that one comment it seems like you live in a bubble thinking that your experience should transpire to the rest of community. And say 'don't waste S&B's time' still baffles me.

Do you know how they run their business? Do you know the business overhead expenses of retaining customer service employees?

Or do you live in a world where you think you know about everything?



Just electrical power systems and coding. And human nature.

I never said everyone that perceive they have a problem is wrong. But it's my opinion that many devices are being sent back for a checkup that have nothing wrong with them. This isn't specific to just S&B. I see it in many threads concerning many devices.
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
It always seems that "people like you" who have working units don't care about others who are not satisfied. I have found this site extremely helpful and FC members helping and sharing their experience. I can not judge you, but from that one comment it seems like you live in a bubble thinking that your experience should transpire to the rest of community. And say 'don't waste S&B's time' still baffles me.

Do you know how they run their business? Do you know the business overhead expenses of retaining customer service employees?

Or do you live in a world where you think you know about everything?

This is the sort of comment that starts flame wars. If you take issue with the way someone responds to you, please don't respond in kind or provocatively, as you did here. Either send a PM or ignore it, or if a rule is broken, report the post.
 
pakalolo,

mixchu69

Well-Known Member
Thanks for the tip on cleaning. When cleaning the cooling unit after one session (still warm), I can use ISO wipes and clean it up in a few minutes. I remember trying cleaning from cold (my experience from the pax carried over) and it was tougher to clean.

Do you guys clean the actual oven, other than using the brush? I saw vape critics video and saw him take out the screen. when do you guys clean the oven?

My apologies to Elmomuzz. I don't want to bring negativity to this thread.
 
Last edited:
mixchu69,

mixchu69

Well-Known Member
No apology needed. I know I come off crass at times. Character flaw...

My oven has gotten so dirty from using my mighty as a cloud that I've had to resort to scraping it out with a knife. Obviously I scratched it all to hell but it doesn't effect performance.
I guess it's more of a visual thing or if performance weakens. I probably 'baby' my vapes too much and need to do more experimentation.
 
mixchu69,

moodster80

Well-Known Member
so just got my mighty today plugged it in and no battery indicator or vibration !! do you think its broken ?
 
Last edited:
moodster80,
  • Like
Reactions: saucybx

adam_baumm

Well-Known Member
Thanks for the tip on cleaning. When cleaning the cooling unit after one session (still warm), I can use ISO wipes and clean it up in a few minutes. I remember trying cleaning from cold (my experience from the pax carried over) and it was tougher to clean.

Do you guys clean the actual oven, other than using the brush? I saw vape critics video and saw him take out the screen. when do you guys clean the oven?

My apologies to Elmomuzz. I don't want to bring negativity to this thread.
hi mixchu, elmomuz. I have removed my bottom screen 3 or 4 times since November. In my view its a must. There is a lot of black down there that does affect taste in time. Only thing is myself and other users have noted that its very easy to scratch the purdy sides of the oven wall.
 

mixchu69

Well-Known Member
hi mixchu, elmomuz. I have removed my bottom screen 3 or 4 times since November. In my view its a must. There is a lot of black down there that does affect taste in time. Only thing is myself and other users have noted that its very easy to scratch the purdy sides of the oven wall.
I'm wondering if using arizer or evo ss elbs will affect the taste or performance. I assume it Will help with the cleaning
 
mixchu69,

scottg402

Well-Known Member
I never thought of that because it is pretty small (I prefer large loads). But when I'm running low on flowers, I will definitely use your suggestion
Yeah I'm the same way but start your day with it once and you'll be surprised how far the smaller bowl takes you.
 
scottg402,
  • Like
Reactions: mixchu69
Top Bottom