• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Nycdeisel

Well-Known Member
VITO! When I saw the image to click on for the video I was surprised by how much that bong looks like mine! mines just an inch taller. cant take a downstem more then 3 1/2 inches long

THANKS MF for the free adapter, Im testing it out now. Got my first good hit from this setup and its takes a bit to know just where to place the mouthpiece hole on the ring. I will probably try it with the stem too.
 
Nycdeisel,
mvapes said:
So I ordered some protection for my box in the form of pre-cut MFLB vinyl skins. Super easy to install and because their vinyl the surfaces is easily cleaned...especially the draw hole. It was only 4 bucks @ etsy and they actually threw in a second skin for free. IMO, totally worth the 4 bucks.

:peace:

Sick skins I think i might have to buy some as well



Also got my PA today and it worked a little too well on the 3rd hit the bowl caught aflame and it was hardly on the hottest temp I guess i still have to get use to it.
 
Seagullmeat,

Vitolo

Vaporist
stoney said:
Vito, any idea if that tube was blown locally? How is the thickness?
I don't know if the bong is blown locally, I kind of doubt it. The Erlenmyer bong from my 1st test was the same price.. and I chose it for more water.. (my bad.. in the case of the MFLB)..
when I went to get the pedestal type bong... I asked about the "$34" ones.. they said I was nutz ... glass on glass was 65 bucks and up....
Then one guy spotted a few of these.
The downstem had a "made in china" sticker.
The glass is thick as hell. I was totally at ease traveling with it.
The size of the pipe has good draw/resitance ratio!
 
Vitolo,

RumbleShorts

Active Member
wake n blake said:
Nice cosmic grinder, Rumble... And also nice setup... I have about the same minus the incredibowls and PA... And the wooden stem... Are those nice? Change the taste at all?

And are you hooking your LB to the incredibowl? Or are they just in the same picture?

Thanks Wake & Blake,
I really like the Cosmic Grinder I usually pre- grind in a SharpStone then a few turns in the Cosmic for the MLB. It is just a little too big to fit into the MLB trench but the extra size over the OEM grinder helps my larger/numb hands and fingers :)

The PA makes the MLB like whole new animal, having the ability to crank up the hit mid-toke is a definite plus. I keep the PA anchored at my desk it makes for a convenient session while surfing or working. The taste remains the same except with the PA you need to be careful not to get the MLB too hot and popcorn the goods.

The MLB attachments almost fit the Incredibowl but not quite. I haven't given up combustion 100% thus the m420. The m420 is perfect for company, let them try a bowl and get settled then bust out the MLB and they are a little more patient when trying it out.
 
RumbleShorts,

Vitolo

Vaporist
RumbleShorts said:
....The PA makes the MLB like whole new animal, having the ability to crank up the hit mid-toke is a definite plus. I keep the PA anchored at my desk it makes for a convenient session while surfing or working.
I agree RumbleShorts.
I work online 12 hours a day, 6 days a week. My iMac sits next to my office window. This has been in that window since the day i got it.. (I have a cover that slips over it at night to keep dust out)
I use this one daily!
Photoon2011-06-09at1350.jpg
 
Vitolo,

vtvape

Well-Known Member
hey guys long time lurker here.. ive recently bought a box and am still getting used to it.. the last time i used it i didn't really get the desired high, should i try holding in hits for longer to get a more body high or just hit more trenches until i recieve a more desired effect, however my problem could also be as simple as some weak herb.. thanks for the help
 
vtvape,

weedemon

enthusiast
vtvape said:
hey guys long time lurker here.. ive recently bought a box and am still getting used to it.. the last time i used it i didn't really get the desired high, should i try holding in hits for longer to get a more body high or just hit more trenches until i recieve a more desired effect, however my problem could also be as simple as some weak herb.. thanks for the help


Hello man! Welcome to FC!

I have a question for you first. are you new to vapor and using the mflb to transition over to the lighter side?

If so...

KNOW that the high from vapor is different from the high from smoking. You are no longer getting all the other nasty shit that you get from smoking. CO, carcinogens... they pass on something to your mind too and you feel "stoned" as a result.

a vaopr high tends to be much less "stony" and more of a functional cleaner high. I don't get burned out like I do from smoking anymore.

as for hitting technique on your new toy.

there are 2 ways i like to use it.

1. microhitting. I hit the juice. wait till i see vapor in the window. I will ever so gently hit it taking sips that last about 1-2 second and then i take my lips off it and wait 2-4 seconds then I hit it again. I repeat this until I am satisfied with my hit.

2. a very long slow haul that lasts 10-15 seconds. still wait till you see the vapor in the window. then hit it very slowly. breathe though your nose if you need more breath.

if you want to heat that vapor even more, don't create a perfect seal around on the mflb, adding more air into your hit, but it raises the temp in the box and you get hotter vapor as a result.

my advice is to experiment and see what works best for you. take your time! even if you are a mad stoner, you can knock yourself on your ass by accident becasue if you are chasing the smoke high you can overdo it and not even realize it until it's too late! I have done that when i bought my vapor brothers whip.


@ vitolo,

lovely videos as always! I can't believe the thickness of the vapor in the bong though! I can't wait to try it out myself.
 
weedemon,

vtvape

Well-Known Member
thanks for the tips i'm about to give it another try and will post back after..i am new to vapor and i was aware that the high was more cerebral but it still didn't seem to be much.. i will go give your tips a try and i will definitely experiment a bit, thanks for the help
 
vtvape,

Vitolo

Vaporist
weedemon said:
@ vitolo,

lovely videos as always! I can't believe the thickness of the vapor in the bong though! I can't wait to try it out myself.
And all your advice was "sage'!
As for hitting that bong... the small size of the bong, and low water ratio.. made the bong more like using a larger "stem' for the LB.
Using that pedestal bong and my LB .. I got pretty ripped today!
 
Vitolo,

vtvape

Well-Known Member
@ weedemon thanks for the tips.. im not sure what exactly i was doing differently than last night but i was able to taste the vapor a lot more and i was more vaked by the end of the trench today than i was last night
 
vtvape,

weedemon

enthusiast
@ vtvape
hey dude, I am thrilled that it was able to help! Anything that gets more people onto vaporizing! :)

I think if you try vaping exclusively you will only develop an even better taste for it. I kind of think of myself as a budding connoisseur of weed or an enthusiast if you will :D My friends call me that too actually a "pot enthusiast" they think its funny though. Vapor has opened up a delicious new world to me. I used to prefer joints becasue i thought they tasted the best. haha Boy was I ever mistaken!

Happy Flights Brother!

@ Vitolo,

the only bong i have is this:


if i keep a fair amount of water in it i can minimize airspace. I hope i can pull clouds that thick though! I know the power of the mflb, but i didn't know those clouds were possible. I guess I do exhale decent clouds with it too. but i never see it collect before I get it.
 
weedemon,

mvapes

Scratchin' Glass!
Accessory Maker
Seagullmeat said:
mvapes said:
So I ordered some protection for my box in the form of pre-cut MFLB vinyl skins. Super easy to install and because their vinyl the surfaces is easily cleaned...especially the draw hole. It was only 4 bucks @ etsy and they actually threw in a second skin for free. IMO, totally worth the 4 bucks.

:peace:

Sick skins I think i might have to buy some as well



Also got my PA today and it worked a little too well on the 3rd hit the bowl caught aflame and it was hardly on the hottest temp I guess i still have to get use to it.


Its all about the protection. for 4 bucks its a no brainer. Always glad to share.
 
mvapes,

JDSupreme

Head of Pot
hunterthompson said:
JDSupreme said:
A nice shot of the "Flight Deck" (I cleaned yesterday lol)

http://i948.photobucket.com/albums/ad324/JeffDireng/2011-08-10210057.jpg

I love the zebrawood MFLB JD! The wood looks sick!

Thanks!

BTW, LOVE your avatar. That's actually going to be the focal point of my HST/Steadman half sleeve tattoo, along with plenty of bats and "buy the ticket, take the ride" somewhere in there. My fishing leg sleeve should be done by October and then its time for my HST arm!! Cant wait!!
 
JDSupreme,
I got an email today saying my power adapter has been shipped, but it says i should expect the arival to be in september 10 WTF! is that like a worst case scenerio? i was thinking of more like a week for shipping....how long did ur guys take to ship?

Your Order is on its way via USPS Priority Mail and, depending upon Customs, will be arriving by September 10, 2011..Enjoy!
 
bcbudvansticky,

Lo

Combustion free since '09
It is out of MF's hands once the Post Office takes over. I'm guessing you are in Canada by your username. I ship Priority to Canada and the post office quotes 6-10 business days but sometimes customs hold things up. I'm wondering if things might be backed up because of the CA postal strike not too long ago? Fingers crossed for you.
 
Lo,

Seek

Apprentice Daydreamer
I think it is a worst case scenario. They told me my MFLB will arrive in 6 weeks and it has taken only 2 of them.
 
Seek,
Lo said:
It is out of MF's hands once the Post Office takes over. I'm guessing you are in Canada by your username. I ship Priority to Canada and the post office quotes 6-10 business days but sometimes customs hold things up. I'm wondering if things might be backed up because of the CA postal strike not too long ago? Fingers crossed for you.


Yes i am in Canada and we did have a postal strike recently but its over now and up and running from my knowledge, oh well i guess ill just have to wait and see what happens.

In the meantime i have a question for you guys. my buddies were using the MFLB and one of them ended up scorching the bottom of the screen. putting it up to light and looking thru the screen i cant see thru the black parts, meaning im not gonna get any vapor through those spots either right? has this happened to your guys mflb? has it affected the vapor at all? and is this gonna be covered in warranty if i ruined the screen?
heres a picture of it
2VFPp.jpg
 
bcbudvansticky,

JDSupreme

Head of Pot
bcbudvansticky said:
In the meantime i have a question for you guys. my buddies were using the MFLB and one of them ended up scorching the bottom of the screen. putting it up to light and looking thru the screen i cant see thru the black parts, meaning im not gonna get any vapor through those spots either right? has this happened to your guys mflb? has it affected the vapor at all? and is this gonna be covered in warranty if i ruined the screen?
heres a picture of it
http://i.imgur.com/2VFPp.jpg

Looks like you could use a LB Cleaning
 
JDSupreme,

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Look to me just like tar/ash spot from combustion. You wont have any problems just put a fresh battery in turn it with open bowl down and use the brush while the heating element is working.. it get quite clean if you have any further problems .. Dip a cotton tip in iso and apply on the spots in the same bowl position , you dont want any iso to fall on your wood.. another trick is to use some to dip the tip in vegetable oil and apply to the spots then plug the battery in let it heat and then brush the spot with iso.. :)

LOL there is a video.. i was typing while you posted it.. It could been so much easier if i found this forum earlier :o
 
Abysmal Vapor,

Seek

Apprentice Daydreamer
bcbudvansticky: I've been laso shocked, when this happened for the first time. Happened once again also. It just smells for some time, needs some clean. The spots will be still visible and only fade out slowly, but spots do not affect the performace of taste.
 
Seek,

Threepwood

Well-Known Member
Hey everyone.

My power adapter arrived this morning! Can't wait to try it out. Didnt have to pay customs which was a massive bonus!

Just a question on the adapter. Is it a good idea to leave the converter plugged in to the mains when not vaping? Or should I pull out at the mains / pull out the wire?

Thanks guys, happy vaping!
 
Threepwood,

stoney

Alex
Threepwood, You can leave it in just fine. Just be aware that most power bricks constantly draw power and while it isn't a lot it can certainly add up if you have a lot of devices with transformers.
 
stoney,
Top Bottom