I.b.vaping
Well-Known Member
Thanks
MiniVAP Vaporizer
- Thread starter stinkmeaner
- Start date
mixchu69
Well-Known Member
I have so many different accessories from different vaporizers, it makes it fun trying different configurations. I will post anything that really stands out from other configs. I learned a lot from this thread and keep going back to old posts for a point of reference.
L.b. vaping, please post any configuration that you really like. Thanks
Tab
Nerd
Yes , like it also alot... sadly very fragile like you sayed. Broked a few of them .. lol
Sorry wasn`t detailed enough i guess.
Meant the Volcano has two solutions in form of sets. The first one is the Solid Valve Set and the other the Easy Valve.
Here you can see the differents between the two sets...
http://www.storz-bickel.com/media/c.../voldigitfahrsolidvalve_slipring_delivery.jpg
http://www.storz-bickel.com/media/c...o/volcanodigit_celsius_easyvalve_delivery.jpg
I think both seams to be able to fitting with the Pinnacle bubbler...
Last edited:
mixchu69
Well-Known Member
Hi vast,Yes , like it also alot... sadly very fragile like you sayed. Broked a few of them .. lol
Sorry wasn`t detailed enough i guess.
Meant the Volcano has two solutions in form of sets. The first one is the Solid Valve Set and the other the Easy Valve.
Here you can see the differents between the two sets...
http://www.storz-bickel.com/media/c.../voldigitfahrsolidvalve_slipring_delivery.jpg
http://www.storz-bickel.com/media/c...o/volcanodigit_celsius_easyvalve_delivery.jpg
I think both seams to be able to fitting with the Pinnacle bubbler...
You can use the solid valve set with the minivap? Can you tell me how you configure it? Thanks
I.b.vaping
Well-Known Member
Just noticed on the mv European site they sell a 14mm glass adapter for MV!any good or no?
Last edited:
Tab
Nerd
No, I don`t know anyway to use the MV with the Volcanos set. That wasn`t for the MV in this case
OnCloud8
Vapor Vixen
Exactly this !
Had a small conversation with MV`s Lore, as i asked him about the new feature a few days ago and if it`s worth to updgrade my old Unit.
He confirm me that they make test with both, teflon and glass airpath atm.
"Anyway these are our thoughts:
- Glass has a higher conductive heating, so after 2-3 inhalations the loading chamber get hotter, but it's a similar process has when you use the decarboxilation chamber.
- Teflon has a lower conductive heating, so the increase of temperature in between inhalations is not as high as with glass. "
He also write.
"you will have time to replace it once we show the lab info. In the case, teflon or glass airpath, both options use a new heating technology,
much robust and faster than before but we will offer the option to update whatever you prefer."
That means we get further information.
Tought i share this to get you guys informed about it, hope it`s ok so far!
Interesting! Super curious to know more, I wonder when they will announce this stuff publicly? I hope all of us recent adopters will be able to upgrade if/when we want to.
I've interacted with Hermes a few times now for accessory purchases, they are always very nice and helpful. Guess I'll reach out again sometime to inquire about the new cores.
I.b.vaping
Well-Known Member
That would be awesome if they did!but surely they wouldn't? Would cost them too much!
lazylightning
It's an obsession but it's pleasin'
I like the 14mm glass adapter sold by Hermes. The part that fits the whip is small enough to fit in the flexicone+ so you can use your flexicone+ as a little 5" whip to your water tool.
I.b.vaping
Well-Known Member
Could you use a f bomb/pnp watertool with it? Straight onto a flexi cone...
lazylightning
It's an obsession but it's pleasin'
Yes, I do that occasionally. My f-Bomb also happens to fit perfectly when used with the regular flexicone and without the cap on the MV so that's my preferred method with the f-Bomb.
MinnBobber
Well-Known Member
The Racthett Song is very soft material so it might be difficult to bore a wider hole, ESPECIALLY in the 14 mm as the walls are very thin. It is very stretchy though so it might appear too small to insert a tube but try. With the 18 mm. boring may be possible but difficult with such soft material
I'm on the road now so cannot try but the stock flexicone plus tube will fit into the Song ( reversed with the flaired end out).
This can then be used for straight hits or held firmly to a bubbler intake--works but not the ideal setup.
i just got some SSV tubing which appears to be much thicker and I'm guessing that will not fit into the silicone Song.
If you are just attaching tubing to the flexicone nipple as it exits the cover, the Ratchett Song will give you a rock solid connection. Tubing directly attached to the nipple is very easy to fall off.
I.b.vaping
Well-Known Member
I just got an email from minivap jorge....
Thanks for your email and explanation about what happen with the MV.
The units of Vapefiend are not beta versions and we will talk with them to ask why your unit is not working.
A few betas were sent 2 months ago to some members of FC. The units were built with a glass airpath in order to improve the taste, durability, also because people are concern about the use of teflon in the main airpath.
A month ago, we considered that the units with the glass airpath are stable enough to be on the market.
People are talking about a lose of taste with the glass airpath.
There are 2 reasons:
- temperature settings are a little higher than the old version
- glass increases conductive heating in the loading chamber, increasing the density of vapor and decreasing taste.
I hope Vapefiend send you a new unit soon, they really take care of their customers. Anyway, I am sure they will give you a good option for your best experience vaporizing.
All the best.
Alfredo
Info - miniVAP vaporizer
www.minivap.com
San Sebastian - Spain
I.b.vaping
Well-Known Member
Sorry for being stupid! But what do you mean without the cap? Could you take a photo of that setup for me please? Thanks
Update! The penny just dropped! I get what you mean! So basket flexi cone adapter watertool then hold it all together and place it in the heater chamber... I think lol I'm baked
And sorry for back to back messages
Last edited:
Tab
Nerd
Thats good news, thx for sharing the info
I think this is one of the only ways to get more infos on the updates, sadly.
But don`t overdose it with the mails fellows,
we need to get chilled out and wait, maybe more medication will help too ^^ 
Last edited:
lazylathe
Almost there...
Just stopping by again to say my new Silver MV (teflon) is rocking it HARD!!
I wish i had my wife's tolerance!!
Getting high with her is the bomb!! The stories she tells and shit she sees!!
Blows my mind!
Then it is as if someone turned the power off!
Poof! Dead to the world!!
As for me, it rocks me every time!
I need to try some concentrate in it on the weekend! That should be fun!!
It seats on the charging dock perfectly, no wiggling required!
Power things lights work, Green for GO, RED for WAIT...
Blue i get delightful bluish vapour!
Pink i get nice fat clouds!
Green i get massive clouds!
Red i need my WT's and the clouds are seriously impressive!!
One thing i have noted and this happens in all my vaporizers!
QUALITY OF PRODUCT IS CRITICAL TO CLOUD PRODUCTION!!!
All types will get you seriously medicated but don't expect huge clouds all the time!
You get to know what to expect after a while.
All in all i now want a glass core MV!!
I wish i had my wife's tolerance!!
Getting high with her is the bomb!! The stories she tells and shit she sees!!
Blows my mind!
Then it is as if someone turned the power off!
Poof! Dead to the world!!
As for me, it rocks me every time!
I need to try some concentrate in it on the weekend! That should be fun!!
It seats on the charging dock perfectly, no wiggling required!
Power things lights work, Green for GO, RED for WAIT...
Blue i get delightful bluish vapour!
Pink i get nice fat clouds!
Green i get massive clouds!
Red i need my WT's and the clouds are seriously impressive!!
One thing i have noted and this happens in all my vaporizers!
QUALITY OF PRODUCT IS CRITICAL TO CLOUD PRODUCTION!!!
All types will get you seriously medicated but don't expect huge clouds all the time!
You get to know what to expect after a while.
All in all i now want a glass core MV!!
Kommyknocker
Well-Known Member
I often wonder if other people garner as much enjoyment as I from the simple act of brushing out a basket, especially a large one, with the gnarly little mV brush.
Who owns the most mV brushes? Official.. And otherwise random, perhaps even better even?
I'm still on my first and only. It's lost a few hairs and is a Lil bit tacky but still does its job.
I take it an short scrub and rinse with Iso will have it a' spanking once more?
Who owns the most mV brushes? Official.. And otherwise random, perhaps even better even?
I'm still on my first and only. It's lost a few hairs and is a Lil bit tacky but still does its job.
I take it an short scrub and rinse with Iso will have it a' spanking once more?
Tab
Nerd
Not so much like you, not tried until now, but I love the generell idea.
Would definitly take into count next time cleaning out my mV.
Thought about the smoothing, relaxing part it will provides when you think about whats happend next, hope that you share the same way...
Will also take into count, to get the mV into a bed full of layered flowers and the smell of beauty arround, because i like do it...
Btw, this is my brush I love to use, buy it in a local Artstore here
Have more of those standard brushes from my vapes but never used it, sadly
Maybe others have some different brushes that they like to use?
Last edited:
Kommyknocker
Well-Known Member
It kinda looks like a bat..a hairy bat.
Tab
Nerd
lol!
Sometimes the hairy things needs to get cuted in shape, because they are to hairy and spread out alot.
If you loose the control over time, then it`s time to cut the spreading parts.
Don`t do it at home, or better do it ...
I mean the bat or bud,... ääähhh the brush ... or whuuat?!! ^^
Just kidding fellows...
Sometimes the hairy things needs to get cuted in shape, because they are to hairy and spread out alot.
If you loose the control over time, then it`s time to cut the spreading parts.
Don`t do it at home, or better do it ...
I mean the bat or bud,... ääähhh the brush ... or whuuat?!! ^^
Just kidding fellows...
Last edited:
THE KISS FREAK
Rock & Roll All Night & Party Every Day!
@lazylathe make sure to use the liquid pad along with a basket under it per Hermes instructions, small or large makes no difference. I've a Persei & 8 for my Oil consumption, BUT I've tried Oil in it 2x ,so that I could review it here, and didn't think much of it! I Cranked it up to Red tossed in a Dab & got a few Super tasty Wispy hits. Oil dissapears almost instantly into pad. I just use my GOLDIE OF LOVE MINIVAP for my herbal medicine. Peace my fellow Vapers
. Peace my fellow Vapers