MiniVAP Vaporizer

I.b.vaping

Well-Known Member
Hi again people's, can someone help me out please? Just wondering with the accessories pack you get with the mv, when would you use the solid cone supplied? The flexi cone do you put a screen in that when you use? Same question with flexi+? the two baskets you get are they both for herb? And how do you use concentrate dish? ie do you sit that on the heater part and use the solid cone supplied? Thanks any help would be appreciated
 
I.b.vaping,

vaporlee

Well-Known Member
Hi vaporlee how did you order that? I've been on there website and can't find option for a green one or for the older model??I did notice though they sell a ptfe collar kit ! What's that for?

Have you managed to get refund from Vapefiend already?! I just placed the order for MV llimited edition(gold) and left the note for Alfredo to get me right one and I just received confirmation.:brow:
 
vaporlee,

Mrmrmrmr

Well-Known Member
Don't use the solid flexicone. I don't know anyone on this thread that does use it. Use the soft flexible flexicone +. Put a screen in that and then pop a basket on top. The concentrate isn't very popular as it doesn't seem to work well. I would suggest dropping whatever concentrate you have directly on top of your herb in a basket. Hope that helps
 

Kommyknocker

Well-Known Member
Don't let it drip though. Be thrifty.. Your tolerance will thank you for it.. And your clean chamber and working core will too.
 
Kommyknocker,
  • Like
Reactions: I.b.vaping

I.b.vaping

Well-Known Member
Don't use the solid flexicone. I don't know anyone on this thread that does use it. Use the soft flexible flexicone +. Put a screen in that and then pop a basket on top. The concentrate isn't very popular as it doesn't seem to work well. I would suggest dropping whatever concentrate you have directly on top of your herb in a basket. Hope that helps
Thanks mrmrmrmr much appreciated

Don't let it drip though. Be thrifty.. Your tolerance will thank you for it.. And your clean chamber and working core will too.
Would you advise putting oil on a basket of herb?

Have you managed to get refund from Vapefiend already?! I just placed the order for MV llimited edition(gold) and left the note for Alfredo to get me right one and I just received confirmation.:brow:
Hi, no waiting to hear back from vapefiend today hopefully! So you're getting the older teflon model?
 
Last edited by a moderator:
I.b.vaping,

mixchu69

Well-Known Member
What I sensed throughout the thread is that people don't like to use oils with this machine. But if the new Mvs run hotter, use the concentrate (liquid pad) with herb underneath. I love oils but have different vaporizers for that.
 

Kommyknocker

Well-Known Member
Like Mrmrmrmr said..
Put herb in the basket to soak up the melted concentrate.
Remember and make an allowance for if the basket module is being used inverted, as in bubbler bound or right way up. A sandwich usually works.. Safety first.
 

sweetherb

Well-Known Member
@I.b.vaping -- s

You couldn't be more off base and clearly haven't read the thread. Try that before throwing insults at people you don't know.

I have read the entire thread from the very first page and have been using vaporizers every day since 1999. How exactly am I insulting anybody by agreeing with someone else and stating what has been said many times in this thread?

There have been so many complaints and returns of this unit, and the manufacturer seems to like "testing" new versions out on people who have paid $600 for theirs. I fail to see how that is acceptable.

If a consumer electronics product like a TV had this many returns, people would stop buying it and insist that the manufacturer rectify the problem before selling any more units.

Once again, I am not bashing anyone, I am just trying to point out that many of the glowing reviews can be misleading to a person new to vaping who might be looking fo advice.
 
Last edited:

mixchu69

Well-Known Member
It's sad when haters just hate. Kinda pathetic. You always will find those people in life. If you think we are all fanboys and find our posts useless because we are disillusioned, move on and stop reading this thread. Won't waste any more time on haters, just ignoring. If they have experience with it and do not like it, that's different.
 
mixchu69,

sweetherb

Well-Known Member
It's sad when haters just hate. Kinda pathetic. You always will find those people in life. If you think we are all fanboys and find our posts useless because we are disillusioned, move on and stop reading this thread. Won't waste any more time on haters, just ignoring. If they have experience with it and do not like it, that's different.

So it's OK for you to call me a hater when I have only mentioned justified issues, but I am not allowed to call you a fanboy? Seriously, I give up. Enjoy your vapes guys! I am done with this thread.
 
sweetherb,
  • Like
Reactions: dimmusp

MinnBobber

Well-Known Member
Yeah my man, got both sizes. I was thinking, if the centre hole is flexible enough to slip a small section of glass into it to shore up stability. What do you think?
Don't have a hydratube just yet but the cloud come out in UK shortly so... Ya know :brow:

Edit: I'll review once they reach Bonny Scotland as well as test the absolute sh#t outta them in every conceivable setup I have going at the mo.

@Henry81
The green one looked badass, red, even more so!

Glass reinforcement is certainly worth trying!!! Or material like the hard mouthpiece.
Let us know the results. Good idea!!
 

I.b.vaping

Well-Known Member
Once again, I am not bashing anyone, I am just trying to point out that many of the glowing reviews can be misleading to a person new to vaping who might be looking fo advice.
Do you own one?

Since I got the gong, was thinking about getting a evo and use the hydratube (I am going to purchase soon anyway). Cheaper alternative will be pinnacle bubbler.
Hey just to keep you in the know, vapefiend have replaced my returned mv with a new one and he's just tested it and thrown in some freebies! It's on its way back down to sunny Cornwall, woop woop
 
Last edited by a moderator:

Tab

Nerd
Since I got the gong, was thinking about getting a evo and use the hydratube (I am going to purchase soon anyway). Cheaper alternative will be pinnacle bubbler.

Please be carfully with the Pinnacle Bubbler, don`t want to make it bad. Actually i got one, but if you accidently push the air throught the bubbler from coughting ( when it`s vertical on your MV), all the water could be in your MV and that`s not good i guess.

I prefer to use the Pinnacle Bubbler with the Volcanos bag...
 
Last edited:

I.b.vaping

Well-Known Member
Please be carfully with the Pinnacle Bubbler, don`t want to make it bad. Actually i got one, but if you accidently push the air throught the bubbler ( when it`s vertical on your MV), all the water could be in your MV and that`s not good i guess.

I prefer to use the Pinnacle Bubbler with the Volcanos bag...
How do you use that with volcano bags? Just offer the easy valve to the bottom of it.?does it work well?
 
I.b.vaping,

mixchu69

Well-Known Member
Please be carfully with the Pinnacle Bubbler, don`t want to make it bad. Actually i got one, but if you accidently push the air throught the bubbler ( when it`s verticall), all the water could be in your MV and that`s not good i guess.
Thanks for the advice. I will definitely look out for that. Vapst, how are you using your minivap? Do you use the flexicone, the plastic mouthpiece, or a modification yourself? I like messing around with different mods.

I am planning to buy the herbalizer whip, cut it shorter, and use the ascent or mflb glass mouthpiece.
 

Tab

Nerd
How do you use that with volcano bags? Just offer the easy valve to the bottom of it.?does it work well?

I have the Solid solution and it fits perfectly with the Pinnacle 14mm, seems to be no air is coming trought the connection from what i had experienced. Maybe a little stripe of silicone inbetween would do the job better.

Thanks for the advice. I will definitely look out for that. Vapst, how are you using your minivap? Do you use the flexicone, the plastic mouthpiece, or a modification yourself? I like messing around with different mods.

I am planning to buy the herbalizer whip, cut it shorter, and use the ascent or mflb glass mouthpiece.

Tested so much settings with the MV, from direct hit to watertool solution with different bubblers... Because it was fun for me :) I was happy with the most of them.
Postet only a few in this thread so far.

At the end I found myself in the ordering progress for the Herbalizer Whip system after the suggestion from here.
Now can`t wait to get it in my hands and look whats happening with it. :) I know, this is nuts ...
Don`t suggest you to cut the tube, i ordered specially for the long cooling path it provides and it`s quality. Maybe you can buy some cheap tubing for testing or use older flexicone+ which i did often...
 
Last edited:

Smknbud

Well-Known Member
I have read the entire thread from the very first page and have been using vaporizers every day since 1999. How exactly am I insulting anybody by agreeing with someone else and stating what has been said many times in this thread?

There have been so many complaints and returns of this unit, and the manufacturer seems to like "testing" new versions out on people who have paid $600 for theirs. I fail to see how that is acceptable.

If a consumer electronics product like a TV had this many returns, people would stop buying it and insist that the manufacturer rectify the problem before selling any more units.

Once again, I am not bashing anyone, I am just trying to point out that many of the glowing reviews can be misleading to a person new to vaping who might be looking fo advice.
Your not adding anything constructive to this thread, only repeatedly pointing out negatives and pointing fingers and calling owners fanboys.
I will admit to be a bit guilty and harsh early on in the INH05 thread when I was dissatisfied with everything about it. I got a comment from the mod, not necessarily what I thought was warranted, but after thinking about it I realized it was warranted. I sold the vape and moved on. You should follow suit and do the same, even more so since you appear to have not even owned or used the MV.
 

mixchu69

Well-Known Member
I have the Solid solution and it fits perfectly with the Pinnacle 14mm, seems to be no air is coming trought the connection from what i had experienced. Maybe a little stripe of silicone inbetween would do the job better.



Tested so much settings with the MV, from direct hit to watertool solution with different bubblers... Because it was fun for me :)
Postet a few in this thread so far.

At the end I found myself in the ordering progress for the Herbalizer Whip system after the suggestion from here.
Now can`t wait to get it in my hands and look whats happening with it. :)
Don`t suggest you to cut the tube, i ordered specially for the long cooling path it provides and it`s quality. Maybe you can buy some cheap tubing for testing...
I will take your advice and not cut the herbalizer, but buy a vapor brothers whip and cut that into different sizes for testing. I really like the ascent glass mouthpiece but it is very fragile.
 

I.b.vaping

Well-Known Member
I will take your advice and not cut the herbalizer, but buy a vapor brothers whip and cut that into different sizes for testing. I really like the ascent glass mouthpiece but it is very fragile.
Do you use the ascent mouthpiece or watertool adapter? Might order one now before vapefiend sends my mv back!
 
I.b.vaping,
Top Bottom