• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Custom Glass Ideas/Designs Thread

DieHard

Accessory supplier
Accessory Maker
I must be a glutton for punishment. I didn't WANT to be too early in the order book this time. I still haven't received my FC-187! Today is one month since I ordered!
:doh::disgust:
But I DID just order the diffusion pump.:rolleyes:
 

NickDlow

Log Hog
:rofl:Hahaha I'd like to see how you'd pull off walking on the ocean that would be pretty interesting
 
NickDlow,

DieHard

Accessory supplier
Accessory Maker
Lead boots?:freak: SCUBA with built-in oil vape.:science:

For thread continuity:
Still trying to puzzle out how the diffusion pump even works...but I have to have one.
Damn GAS.
 

weenstoned

Well-Known Member
For thread continuity:
Still trying to puzzle out how the diffusion pump even works...but I have to have one.
Damn GAS.

You're not alone. I don't get it, but just got an e-nail so I ordered a minute after blankrider posted the link.
 
weenstoned,
  • Like
Reactions: DieHard

Frederick McGuire

Aggressively Loungey
So the stem is basically a u shape (note I used a lowercase U which has the little stick bit at the bottom), and you fill it with water pretty much to the top of the u.

The inlet joint is connected to the top left of the u.

As you pull the vapor comes down and flows up the other side. It basically acts as a natural perc.
The bottom right of the u lets water back in so that you're always getting water filtration, otherwise at the beginning of the hit you'd clear all the water out of the tube and end up with effectively a dry pipe :lol:

That part also has a ball valve there, so that it will let water flow in, but not vapor flow out.

Also, I just ordered one :D
 

Tweak

T\/\/34|<
For thread continuity:
Still trying to puzzle out how the diffusion pump even works...but I have to have one.
Damn GAS.

My take, the diffusion pump is a dream for dabs. There is very little room in the can that water isn't touching for reclaim to accumulate or surface area for the glass to rob flavor.

I'm guessing for dabs, some kind of water rig is needed/preferred because of the heat of the nail and the resulting vapor cloud. :shrug:

IMO, the magic of the diffusion pump is that the perc is constantly surrounded by water, so it should always be as cool as the water. Instead of diffusion\cooling from water like you normally get making bubbles, you are getting mostly cooling from touching cold glass and a tad bit of diffusion from the water at the end. The water recycling feature of the ball check valve ensures that the water in the can is constantly stirred, instead of using the same bit of stale water. So these two things combined means the flavor lasts longer. And the placement of the perc + low diffusion means you can hit it as hard as you like without taking a drink.

Not saying it's bad for vapor, just geared towards oil use. Can't wait to see some vids.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Thank you @Frederick McGuire for that explanation! I figured I had a good idea of how it worked, but I missed the bit about how it recycles.

Since I'm flowers only, I'm going to wait until I hear from someone using it with the nano (and maybe some feedback from the first customers) to determine if I want to try one out.

Damn you @blankrider this thread is becoming as addictive as the cheap bubblers thread! (if not more since we have input on the design!)
 

tennstrong

Well-Known Member
Too nice for my enail after considering the water weight added to the piece and the hollow base- one fc710 coming my way! Where do people grab their preferred dropdowns from? Need a couple- 14mm female-18 male & 14female- 18 female
Edit: how could i forget to credit @blankrider for making this happen! One of the most promising pieces (if not the most) coming out now!
 
Last edited:

weenstoned

Well-Known Member
Too nice for my enail after considering the water weight added to the piece and the hollow base- one fc710 coming my way! Where do people grab their preferred dropdowns from? Need a couple- 14mm female-18 male & 14female- 18 female

Just got this 14mm female to 18mm female from bubbler:
http://www.dhgate.com/product/drop-down-14-5mm-female-to-18-8mm-female/214864706.html

Shortly after I ordered though Kathy got what appears to be the same one for like half the price. Oh well
http://www.dhgate.com/store/product/glass-downstem-glass-dorpdown-glass-dab-glass/215587019.html

Pretty sure it doesn't come up in search results because it is listed as a dorpdown instead of drop down or dropdown (just messaged them to correct the listing).

Pretty sure alina has some drop downs that are male jointed.
 

tennstrong

Well-Known Member
Do I correctly understand you to be saying that contact with the glass reduces flavor? If so I've never heard that before.
What? Of course it does, otherwise you wouldn't have claim. Go ahead and dab a 7" mini then a 16" straight tube
 
tennstrong,
  • Like
Reactions: Erwin

BoogerMan

Well-Known Member
Just got this 14mm female to 18mm female from bubbler:
http://www.dhgate.com/product/drop-down-14-5mm-female-to-18-8mm-female/214864706.html

Shortly after I ordered though Kathy got what appears to be the same one for like half the price. Oh well
http://www.dhgate.com/store/product/glass-downstem-glass-dorpdown-glass-dab-glass/215587019.html

Pretty sure it doesn't come up in search results because it is listed as a dorpdown instead of drop down or dropdown (just messaged them to correct the listing).

Pretty sure alina has some drop downs that are male jointed.
Check these out from Dkglobe. You get 2 of the same kind but only for like $9 :)

http://m.dhgate.com/product/2pcs-lot-glass-dropdown-more-size-different/215586818.html#pd-019

They are a good seller. I bought some dropdowns from them and they are good quality. I also got a double barrel recycler from them and it is thicker and better quality than the other ones I have purchased from other sellers :D
 
BoogerMan,
  • Like
Reactions: SSVUN~YAH

EverythingsHazy

Well-Known Member
I have something to show you guys, and it is going to be...

The FC-186 Matrix-Pillar-Hybrid!!! (*Produced by stevenlmz79* water test coming soon)
other_962007812_00.jpg

other_962007990_00.jpg

other_962007895_00.jpg

other_962008073_00.jpg



timthumb.php


The top section is going to be 1cm taller he said.

So, what do you think?


**Edit** Price is about $55
 
Last edited:

EverythingsHazy

Well-Known Member
@EverythingsHazy Nice, any ideas so far as the final price yet? Definitely going to have to add that to the collection

Just got word that the price is "about $55". I suggested 40-45 at first when he asked what it should be, going based on the fc-187, and not knowing what the manufacturing is going to cost him, and he said that it would be about $55 because it has the 8 pillars which break easily during welding, as well as more height than the fc-187 which may increase shipping price.

Seems more than fair for such an amazing piece.

Still awaiting a water test.
 

Frederick McGuire

Aggressively Loungey
I have something to show you guys, and it is going to be...

The FC-186 Matrix-Pillar-Hybrid!!! (*Produced by stevenlmz79* water test coming soon)
other_962007812_00.jpg

other_962007990_00.jpg

other_962007895_00.jpg

other_962008073_00.jpg



timthumb.php


The top section is going to be 1cm taller he said.

So, what do you think?


**Edit** Price is about $55
900x900px-LL-9bb28d6b_mother-of-god-super-troopers.jpeg


I will own that.
stand-in-my-way-and-i-will-break-you.png

:lol:

Tiny note,
Any chance we can make it a bit bigger?
I was expecting it to be 14-16 inches tall, not 12.
The mini pillar is gonna be around 10 or so isn't it?

Either way, that looks awesome :D
Must Buy :drool:
 
Top Bottom