Cheap High Quality Bubbler

MinnBobber

Well-Known Member
The FC-187 has the closest diameter can as the Mobius Ion of any DHGate bubbler, just a lil bit taller. Are you wanting smaller?

I sold my D-020. Too small for my liking. The D-020-D is a bit bigger so I don't need to bend down as far.

gIeygy6l.jpg

From left to right - D-020 - D-020-W - D-020-D - GB-187

thanks for the pic!!!
I'm actually looking for smaller than my Mobius Ion--a smaller, CHEAPER , less diffusion piece for travel and minimal diffusion/ mainly to add some moisture.
Any suggestions are greatly appreciated

I have no ides what a "diffusion pump" perc is---minimal diffusion or ??
 

Mister G

Deceptively Old Fart
I could be wrong - hard to keep up with this thread and even harder to remember thanks to the vapor ;) - but don't think there is a discount code for any DHGate glass. There are specials on occasion and emails with discounts if you sign up. The FCLOVE code is for e-nano and other Epic items.

There was a special code (FCLOVE) for when the FC-187 came out, I was hoping it would carry over to this (or even to all the pieces from the Concept Glass project).
 

Tweak

T\/\/34|<
It's probably been mentioned and I didn't see it listed but is the FC-187 18mm or 14mm?

It's 18mm. It's a big bubbler. For comparison, my GB-187 weighs 1 lb. The FC-187 weighs in at 1.31 lbs. You can feel the difference when picking it up, my hand won't reach around the entire can like the GB.

Think the GB-187 but with a wider can, about the size of the Ion Matrix.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
It's 18mm. It's a big bubbler. For comparison, my GB-187 weighs 1 lb. The FC-187 weighs in at 1.31 lbs. You can feel the difference when picking it up, my hand won't reach around the entire can like the GB.

Think the GB-187 but with a wider can, about the size of the Ion Matrix.
Thanks again but I confused myself with the product number, I meant the FC-710 fixed now.
 
SSVUN~YAH,
  • Like
Reactions: Tweak

flotntoke

thoroughly vaped
thanks for the pic!!!
I'm actually looking for smaller than my Mobius Ion--a smaller, CHEAPER , less diffusion piece for travel and minimal diffusion/ mainly to add some moisture.
Any suggestions are greatly appreciated

I have no ides what a "diffusion pump" perc is---minimal diffusion or ??

Think GB-187, or FC-187 if looking for a sidecar, would fit the bill. Have and enjoy both, though use the GB a little more - in spite of my love of sidecars. My GB perc just performs a bit better.

There was a special code (FCLOVE) for when the FC-187 came out, I was hoping it would carry over to this (or even to all the pieces from the Concept Glass project).

Sorry about that! I didn't know about that one and didn't use it for my FC-187 purchase. Doh!
 

stickstones

Vapor concierge
The communication between Steven and myself has been satisfactory. He hasn't shipped my replacement unit yet, but that's because we have been discussing what I wanted. We nailed it down a couple of days ago and my last message to him was today asking when it would be shipped.
 

Vicki

Herbal Alchemist
I'm now working with pipesdaddy.com because my birthday bubbler didn't arrive today. :(

I thought they had free shipping, but my cheapest option was over $14.00 through USPS for a $34.00 bubbler. Pretty damn high for USPS Priority mail. I've never paid that much. The product was shipped promptly, but has disappeared. Tracking hasn't been updated since Monday either. USPS will not help me because I am the recipient, but admit that the package should have been here by now, and is probably lost.

I'm not sure who I spoke with at Pipes Daddy, but he assured me he was going to call USPS to get some information, and try to find out where my package is at this point. He also promised to call me back by end of business today. He was very nice, and really wanted to help me too.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
I'm now working with pipesdaddy.com because my birthday bubbler didn't arrive today. :(

I thought they had free shipping, but my cheapest option was over $14.00 through USPS for a $34.00 bubbler. Pretty damn high for USPS Priority mail. I've never paid that much. The product was shipped promptly, but has disappeared. Tracking hasn't been updated since Monday either. USPS will not help me because I am the recipient, but admit that the package should have been here by now, and is probably lost.

I'm not sure who I spoke with at Pipes Daddy, but he assured me he was going to call USPS to get some information, and try to find out where my package is at this point. He also promised to call me back by end of business today. He was very nice, and really wanted to help me too.
cute%20kitten.jpg
 

tennstrong

Well-Known Member
Honestly I see the new diffy pump as being the new go to recommendation for a dabbing piece if it functions similar to the original. How have people's pieces come as far as dropdowns go? Are they all 90 degrees straight? or do some come bent
 
tennstrong,
  • Like
Reactions: SSVUN~YAH

OyVape

Well-Known Member
So this post is a double review. These two pieces are from different sellers but the same manufacture. It is a honeycomb to turbine sidecar. The GB-228 is from yingmin and has a female joint. The D020-W-2 is from sunshine store and has a male joint. They are equally awesome.

Old post:
The D020-2-w is such a great vape piece!

normally I would have to be at work two and a half hours ago but lucky it is a holiday and I am at home enjoying an epic wake and vake session.

This piece is designed perfectly. It is seriously impossible to get any splash because the turbine not only is a great splash guard but spins the opposite direction than the mouthpiece. It is just brilliant.

The size is perfect. The diffusion is fantastic. I keep the water level ever so slightly above the honeycomb. When I take a hit it actually works at both discs. The honeycomb being the main perc but also bubbles some in the turbine. When you clear it with a fast pull it creates a pretty decent turbine action.

I had a female gong made for it because I am sick of adapters. I think if this piece had a female joint you guys would be ordering it like crazy. I just can't say how happy I am with it!

Ladies and gentlemen I would like to introduce the cheap bubbler champ. The yingmin GB-228 honeycomb to turbine sidecar. I purchased it when it was accidently priced at $22.50 but it actually sells for $29.55 and I believe that it has the potential to dethrone the original D020 as best cheap vape bubbler.

It has the much sought after sidecar mouthpiece. It has 18mm female joint. It has good flavor and ample diffusion. The turbine disc is a wonderful splash guard. It is very well made and can support my nano without tipping over. All this for under $30 shipped.

Pictured next to sunshine store model with blue base and lip for comparison. The D020 killer

http://www.dhgate.com/store/product/hot-sell-glass-bong-glass-smoking-pipe-with/205550279.html
6px9Asx.jpg
I just got the GB-228 & am not getting much vapor through it, using my Arizer Air (like a mini Solo). Since I haven't gotten a 14" GonG adapter yet, I've jerry rigged a seal with some silicone tubing.

Problem is, I am a total noob when it comes to this double disk setup. This is probably a stupid question: I ddon't know how high I should put the water? Now I have it between the 2 disks. I'm not seeing much vapor inside the bubbler or when I exhale.
 
OyVape,

ataxian

PALE BLUE DOT
Nah, i got the D020 and D022, but the D020 is pretty much like the FC187. I missed out on the GB 187 when it was first on yingmin, but i figure the D020 is close enough that I don't really need another so similar.

Im gonna use the GB 234 as a HF 2.0 though, so im pretty excited about that.
D022 wow!
D020 wow!
Very nice glass!
By adding a chillum to the mouthpiece of the FC 187 makes it a good one to add,

PARIS OG before bed!
 

twentypast4

#nycdabber
Last edited:
twentypast4,
  • Like
Reactions: SSVUN~YAH

Poostuff

Please delete
I haven't had any luck fitting my old Cloud into anything that's not a hydratube. It seems like if I want to use it inverted I'll need a cloud buddy. I mean it fits in the D020-D but the joint is way too loose to get a good seal. I have a bigger one on the way but the Cloud seems way more fussy about these pieces than I am.
 
Poostuff,
Top Bottom