• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

nihil

Member, Known Well
I also use this technique on several of my mini rigs, each has a short glass extention held in place with silicone to make using it more comfortable, so close to the face. It works quite well, and really doen't look bad IMO, easy to remove for cleaning etc... I even used one of those old school flared downstems (no joint) for a slider bowl from an old bong I put a 18mm stem in its place. That works quite well as a light weight extention too. Glad you made it work for you, so you can get back to enjoying :D

Nice. I'm definitely going to look into your suggestions, thank you. I primarily vape in one spot, so having a few whips/extenders will make this entire experience more enjoyable with a few of my pieces.

Besides, I ordered 10' of silicone tubing.. I'm going to need to find a use for it.
 

jambandphan03

in flavor country
I use a 18mm male joint that has a narrow tube opposite of the joint to plug into the end of my whip... makes a good mouthpiece

like one of these...

R8dOYy7.jpg


:clap:WOOT!! just saw my tracking updated to show the double vortex landed in San Fran today!! :D:D just releived to see an update since it shipped out on the 10th... I am crossing fingers it gets here intact and functional.
 
Last edited:

nihil

Member, Known Well
Do you have any SSV type Mouth Pieces laying around to add to the end of the hose? Not necessary but feels a bit more classy, lol. I like the cigar tip shaped MP too but requires the hose to be curved just right.

Great ingenuity, looks like your mod adds some needed length to the MP too, :tup:

Thanks. The added length now let's me see what is going on. On that note, my perc seems good to go, firing evenly.

Will look into getting some of those mouthpieces for the SSV, that's a good design.

One of the reasons I gave away my NO2 was that I hated the plastic mouthpiece and/or whip. I actually have 3 or 4 JoDa stems that I may use as well.. I've been neglecting them after getting some decent bubblers.

Edit: Thanks for your suggestion as well @jambandphan03.
 

421

Well-Known Member
Whip bubblers are great, I've been using this one for a little and so far it's perfect for reading/computer sitting, plus watching it fill up is just plain fun. I tried the whip in my D020 as well, with a little bit of tape to keep it in place that worked pretty well too.

VzbToZQ.jpg

man this piece would be really amazing if the two slots were switched, vape in dewar and hose offset. i have a similar piece i bought for way too much that works well for what i call vapor hookah'ing... except it doesn't sit the vape in dewar and have had unfortunate tipping.
 
421,
  • Like
Reactions: Trogdor

Delta3DStudios

Well-Known Member
Accessory Maker
Anyone looking for a GB-242 - I found them in stock on ThickAssGlass - $69.99 is a bit pricey - but even at that price it's still a fun piece for the price (really like mine) - Note the glass is on the thin side, you are paying for a nice tiny vortexing rig (vortexes really nice)

http://www.thickassglass.com/collec...rix-recycler-dome-and-nail-included-14mm-male

DSC04075_1024x1024.JPG


(pictures are misleading, that's a very small 14mm rig!)

Really interested in what @blankrider can do to merge this design with the GB-187 design.

Although, No offense, but I'm going to hold off on any further purchases from this vendor until I know his quality has improved. Only 3 of the slits on my FC-187 fire when using my E-Nano with a nice steady draw. Tell him to buy the nice birdcage percs made for @yingmin5!

The perc is the most critical part of the whole piece, without it, the unit is useless. I'm still debating what I want to do with mine. If they would use a nicer perc I'd consider buying a second one. But for now I'm seriously thinking about flipping my FC-187 to a friend and buying that Jhanpixel UFO rig - what do you think @flotntoke - ya think the UFO rig is a good upgrade from the FC-187 (excluding the fact the UFO rig is 3x the price)
 

blankrider

Well-Known Member
@cybrguy I am sure that Steven is not going to require you to make any more orders for you to receive a replacement. I am under the assumption that since you are an FC member he thought you would be buying the next available piece. I myself will be buying one but probably not every single FC piece. I know that if I was a sales person I would use this tactic in an attempt to save on shipping and get more business.

I still have not checked tracking on my 187 but honestly I'm a little anxious myself about it arriving safely

@Ratchett I am not sure if the birdcage perc is something they are making themselves or outsourcing but I will look into improved ones for future pieces. I figured since he made 100 we could talk revisions before the second production run
 

NewVape

What a guy!
Limited%20edition%20starbucks%20glass%20water%20pipe%20glass%20oil%20pipes%20glass%20smoking%20pipes.jpg

http://www.dhgate.com/product/limited-edition-starbucks-glass-water-pipe/215922845.html

Too pricey for my blood, but I'm guessing this and other versions will start showing up cheaper soon...just like a lot of the new stuff...

If that ever becomes a "cheap" piece I'd get one.

I'm thinking of getting something like one of these guys, it looks like my nose would be too close to the dome. And they are still out of the cheap range like the starbucks above. Has anyone seen a better/less expensive oil drum out there?

http://www.dhgate.com/product/oil-d...ecycle-glass/215079311.html#s1-8-1|3121996136
rBVaGlSVFymABJSDAABPNCqt5dI622.jpg


http://www.dhgate.com/product/black...rig-recycle/215620985.html#s1-17-1|3121996136
rBVaGlSWQkiASTdGAAEXaaXrLeQ230.jpg


edit to add links
 

alltoreup

Damn you, party liquor
My FC-187 arrived today in one piece. After a quick wash I did some water testing and then some EVO testing and it's a keeper. Only visible flaw is the dewar joint is a little rough where it meets the top but is still better than my original GB-187. It's a very solid piece. I didn't think I would like the mouthpiece after some reviews I've read, but it's actually pretty nice. I was afraid it would be as shallow as a EVO dry mouthpiece. Those things are horrible for me. But after testing I think I actually like it better than the GB mouthpiece.

This thing rips with my EVO. It's about 1/4" shorter than my GB but the can is slightly larger. Matrix perc is bigger and seems to fire all the way around just like my GB. The rings are pretty straight in the perc but in one spot there is a missing portion creating one larger slit. That's the first one to fire of course but it doesn't affect the others firing. It does fire all the way around in a clockwise pattern from what I can tell. Opposite direction of the GB curiously.

With my EVO on it, I can't pull water into the mouthpiece until I pull it and then only a splash. You could probably get it to swirl all the way up with some massive lugs but under normal use most shouldn't get any water at all.

Overall, very pleased with the purchase and ready for more testing. :rockon:

Happy vaping, all!
 

hanfhead

is high
Got this d020-X yesterday. Hits just like the sidecar version (d020--2-w). The can is slightly larger, maybe a half inch taller. The top mouthpiece is much easier to hit off the table. Took a quick video since we all love water tests.
I also quoted in my original review from the d020--2-w below, warning on the video volume turn it down. sorry


Warning on the volume of this one. Video at the bottom
Got this today.

Here is a quick comparison with a d020 gb188 and the little inline rig I forget which model.

07fldHU.jpg

Ch99gTn.jpg



Happy that the can size is smaller than I expected. Slightly larger than the d020. It is less volume than the 188. Much easier to take dabs than the 188. From the pictures I was expecting the same diameter and taller, but it is about the same height and more narrow.


And this thing vortexes plenty for my liking. Even drawing through an infiniTi.




Links:

Grabbed a d020-x to use my coupon since it expires tomorrow. It is like the d020--2-w but not a sidecar. I love the d020--2-w and use it daily. Only problem is when company is over hitting it on the desk, everyone has to squat to hit it. I was going to buy another *--2-w anyway so I figured I might as well try something different, but still the same.

D020-X
NtLgSI3.jpg

http://www.dhgate.com/product/d020-x-glass-water-smoking-pipe-with-two/192446141.html


D020--2-W
6OzSP4r.jpg

http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/193620248.html
 

PoopMachine

Well-Known Member
Everyone remember the insane expensive big bong recycler I bought from Steve that arrived broken? Replacement came today.
GAH... It is improved, recycles, hits fucking GREAT.. And leaks all over my hand and floor. Bottom joint. Fuck me, I really like this piece now. Steven's reaction TBA.

If the joint is just leaking, thats a REALLY simple repair. Granted you should get a replacement but a joint that didnt seal right is super easy to fix for a glassblower. Find someone close to you that does repairs, it shouldnt cost more than $30-$40 to get it fixed.
 
PoopMachine,
  • Like
Reactions: BoogerMan

tennstrong

Well-Known Member
Limited%20edition%20starbucks%20glass%20water%20pipe%20glass%20oil%20pipes%20glass%20smoking%20pipes.jpg

http://www.dhgate.com/product/limited-edition-starbucks-glass-water-pipe/215922845.html

Too pricey for my blood, but I'm guessing this and other versions will start showing up cheaper soon...just like a lot of the new stuff...
Preying for more kleins that function well in the upcoming months from china on lower budget. Very possible.
Also that second oil can with the kinked neck posted above and splatter bottom is fine, but for a china piece that pricey I'd rather spend money on local artists. OGC [Oil Glass Contraptions] has been catching my eye so often with his bird worked kleins/incyclers...keeping me from my GAS... :drool:
10865146_1531157980479354_624576573_n.jpg
10848169_1543605375857188_1523325840_n.jpg


On that note: people who have incyclers and a klein or have tried both how would you compare the two?
EDIT: did we miss the first chinese torch tube?? Ridiculous price as with this vendor but still.
New%20Limited%20Edition%20sandblasted%20starbucks%20glass%20Vapor%20Rig%20glass%20smoking%20pipe%20Hitman%20Dabucinno%20Hammerhead%20Torch%20Tube%20with%20Hammerhead.jpg
 
Last edited:

Frederick McGuire

Aggressively Loungey
Nice finds guys :)
Always nice to see new pieces popping up.

I really like that splattered oil can, can't wait for that to get a bit cheaper :)

Also, I just saw I have a referral link on dhgate that should get anyone that uses it $10 off.

Copy paste from dhgate:

Use my invite link for DHgate and get $10 OFF your first purchase! Sign up now at http://m.dhgate.com/ii/bYfMve7a

Dunno if you need to be a new member, but it might be worth the hassle of setting up a new account to save $10 - that's like a 25% discount for a lot of these pieces :lol:
 

redijedi808

Well-Known Member
Nice finds guys :)
Always nice to see new pieces popping up.

I really like that splattered oil can, can't wait for that to get a bit cheaper :)

Also, I just saw I have a referral link on dhgate that should get anyone that uses it $10 off.

Copy paste from dhgate:

Use my invite link for DHgate and get $10 OFF your first purchase! Sign up now at http://m.dhgate.com/ii/bYfMve7a

Dunno if you need to be a new member, but it might be worth the hassle of setting up a new account to save $10 - that's like a 25% discount for a lot of these pieces :lol:
Verified working as a new member:
fcb3m.jpg
 

flotntoke

thoroughly vaped
Am I the only person that hasn't received their FC-187???? Things been sitting in Jamaica New York for like 8 days. Wtf USPS?

Think they are trying to inspire you to make one for yourself! :)

That is odd, but wouldn't be surprised if it has moved from there with no tracking update. Either that or it got pushed aside instead of going on the truck it should have.
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Think they are trying to inspire you to make one for yourself! :)

That is odd, but wouldn't be surprised if it has moved from there with no tracking update. Either that or it got pushed aside instead of going on the truck it should have.
Their inspiring me alright! I hate international shipping! Something always seems to fuck up for me.
 
VaPeD&CoNfUsEd,
  • Like
Reactions: flotntoke
Top Bottom