Discontinued ThermoVape

OF

Well-Known Member
What do ppl think of the TV dart knock off from Zoly. Is it comparable?

AFAIK there is none. I've reported on their counterfeit Revolution, but have never seen anything about DART. Do you have a link, please?

OF
 
OF,

mixchu69

Well-Known Member
AFAIK there is none. I've reported on their counterfeit Revolution, but have never seen anything about DART. Do you have a link, please?

OF
Sorry, meant the revolution. Can you send me a link of your review? Thanks
 
mixchu69,

OF

Well-Known Member

incandenza

Well-Known Member
Just a word of caution regarding new LiFePO4 batteries from Tenergy -- the negative side is now slightly raised which makes the batteries longer by a few millimeters. So, if you put these new bats in your T1 and fully screw together the battery compartment, the switch will be on without you actuating it! You have to leave the battery compartment unscrewed a little bit in order to use the switch with these new Tenergy LiFePO4 batteries. Be careful because you can easily burn out your core if you leave it on constantly. I lost at least one core this way by accident.
 

exmilker

Well-Known Member
After 4-5 years with the T1, 3 out of my original 6 batteries that came with the unit has finally died:rip:. Since 1 set wasn't enough power for me to fully medicate I decided to get new LiFePO4 batteries from Tenergy. After some research I've notice they're two versions, one being 450mAh and the other being 750mAh. I went for the 750mAh and like incandenza said, "the negative side is now slightly raised which makes the batteries longer by a few millimeters". After some use and having the new batteries bang together in the original battery traveling tube, I've notice a slight inwards dent on the negative side of the battery caused by the positive side of another battery, that slight dent made it fit perfectly, now I can fully screw it down without having it worry that the coil might go off. :rockon:


As for the new 750mAh batteries. They're AWESOME!!! I get around 3-4 bowls with 8-11 long rips of each bowl (with water attachment). Nice thick dense hits and heat up time is like 3 seconds max. Anything longer than that then you'll notice charring. I love my T1 this thing is practically bullet proof. Everything is still original from when I first got it back in 2011-2012
 
Last edited:

PPN

Volute of Vapor
After 4-5 years with the T1, 3 out of my original 6 batteries that came with the unit has finally died:rip:. Since 1 set wasn't enough power for me to fully medicate I decided to get new LiFePO4 batteries from Tenergy. After some research I've notice they're two versions, one being 450mAh and the other being 750mAh. I went for the 750mAh and like incandenza said, "the negative side is now slightly raised which makes the batteries longer by a few millimeters". After some use and having the new batteries bang together in the original battery traveling tube, I've notice a slight inwards dent on the negative side of the battery caused by the positive side of another battery, that slight dent made it fit perfectly, now I can fully screw it down without having it worry that the coil might go off. :rockon:


As for the new 750mAh batteries. They're AWESOME!!! I get around 3-4 bowls with 8-11 long rips (with a water attachment) Nice thick dense hits and heat up time is like 3 seconds max. Anything longer than that then you'll notice charring. I love my T1 this thing is practically bullet proof. Everything is still original from when I first got it back in 2011-2012
Could you provide a link for the new 750mah tenergy's, please?
 
PPN,

aKa

Well-Known Member
Does anyone know if Vapor Envy is still an active shop ? They seem to have a few Thermovape items that can not be found anywhere else, but I cannot get an order through (I get an error message when checking out).

I sent them several emails without getting any answer, and their phone number seems inactive, but I'm calling from France so I may be doing something wrong.

If they're still doing business, could someone help get in touch with them ?
 

OF

Well-Known Member
Does anyone know if Vapor Envy is still an active shop ? They seem to have a few Thermovape items that can not be found anywhere else, but I cannot get an order through (I get an error message when checking out).

That would be very fortunate if they are. They haven't been made in time now, I suspect that's a ghost on the web you're chasing.......but keep after them, if you run them down it could be reward time?

Good luck.

OF
 
OF,

aKa

Well-Known Member
I suspect that's a ghost on the web you're chasing.....

I've been worrying about that. I always regreted not buying the power supply kit and the glass mouthpiece when they were available, as I've had nothing but frustrating experiences with the batteries of the T1. And now on top of that those batteries are getting harder to find. It's a shame a finely crafted device like the T1 is just gathering dust in one of my drawers.

I know it's not the place to do trades, but I'd love to get my hands on the official PA made by the Thermovape guys ...

Oh well ...
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I've been worrying about that. I always regreted not buying the power supply kit and the glass mouthpiece when they were available, as I've had nothing but frustrating experiences with the batteries of the T1. And now on top of that those batteries are getting harder to find. It's a shame a finely crafted device like the T1 is just gathering dust in one of my drawers.

I know it's not the place to do trades, but I'd love to get my hands on the official PA made by the Thermovape guys ...

Oh well ...

Post a wanted ad in the classifieds, you never know, I actually got my PA bc someone was selling one there a long while ago. Even though I hardly ever use my T1 anymore, the PA (along with a wpa, mine is 14-18mm delrin from that same member) really does breathe new life into what was a fantastic on demand convection vape ahead of its time, glad it was my first.
 

AVENTUS

Well-Known Member
I remember the thermovape Cera was the first portable vaporizer I seriously considered. But I told myself I'd wait for the day an adjustable temperature / low temperature vaporizer came out, that rivaled the digital volcano.

Fast forward today when live resin is fairly common, and these tiny low temp stainless/ceramic pens like the Linx Hypnos zero, really do the trick so well, and taste just as good as low temp on a volcano!

Glad thermovape cera set the bar high with materials and construction.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
For me the portable on demand convection promises of Thermovape fortunately live on in the Grasshopper (temp control power pen) and Milaana (analog style flavor beast) even more effectively though I do wish TV kept on going
 

Custom Flower Hardware

Well-Known Member
Manufacturer
For me the portable on demand convection promises of Thermovape fortunately live on in the Grasshopper (temp control power pen) and Milaana (analog style flavor beast) even more effectively though I do wish TV kept on going
I agree. And though it takes a bit longer to get to vape temp the ceras flavor profile beats both just my opinion. But then again the gh and mi are there too. Time for some head to head comparison:science:

Edit: who knows what batts are kick ass these days that would rock the cera. I have a set of efast 18650's from my apollo. They have the buttontop. Thanks for any input.
 

VAPEHUNTER

Well-Known Member
Does anyone know if Vapor Envy is still an active shop ?

Vapor envy still lives on but only on e-bay.
http://m.ebay.com/sch/i.html?sid=vaporenvy&_pgn=1&isRefine=true

He still has the glass mouthpiece too.
4dPng86.jpg
 
Top Bottom