• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

The Extreme-Q Vaporizer

Yeah I know you're right, it's more a peace of mind thing :p If i'm cranking it up to near combustion it doesn't hurt to be safe right? :p

Did you ever try to let the fan blow and fill your bubbler instead of inhaling? Or if you didn't could you try it for me and see if it works?
Theory says it should work fine because pressure is created, just from the other side but practice often differs from theory lol.
 
TheMedicalStoner,
Ah yeah no fan then :p

Like I said, in theory it should work.

Someone has to have tried it right?
Or am I the only stereotypical "lazy stoner" lol jk, it really would be great for my asthmatic problems.
I'm ordering one anyway but I still wanna know, it takes atleast 12 days or so before its here so someone is bound to be able to test it with any bubbler really :p.
 
TheMedicalStoner,

jojo0420

Cloud Chaser
I have tried the fan, with both setups I posted in the video. The fan isn't strong enough, even on 3, to bubble the bubbler. It will bubble the water tool, slowly. But it is of no real use, no delay on this direct draw piece.

That carbon filter you linked from ebay would work, actually on either end of the setup. On top of the EQ, with the whip plugged into it (but this way would move the load further from the heat.) Or on top of the bubbler with the whip plugged in there.
 
jojo0420,
  • Like
Reactions: killick
AH damn that sucks, I was hoping it would be strong enough to bubble it... I can at least turn it on to lower the drag time a bit.. I hope.. It looks like it needs some lung power to fill the bubbler chamber, which i dont really have haha.

How long was your hose though? Longer hose means less power ofc.

Glad i found the filter relatively cheap then. No screen in it or anything so maybe i can put a small piece of cotton on the bottom to prevent any coal coming through plus itll cotton filter aswell :).
 
TheMedicalStoner,

Anony Moose

Active Member
The D020-D is pretty small and has pretty minimal drag, especially considering its impressive diffusion, so I wouldn't worry about that all too much. Based on my experience vaping with a V-Tower, if you elbow pack that's going to be your primary limiting factor re: airflow right there. The Cyclone bowl sucks at vaping small amounts. The SSV wand can provide better airflow than a tightly packed elbow while still being better than the Cyclone bowl at vaping small amounts. You might want to look into some 3/8" tubing if you want increased airflow as well.
 
Anony Moose,
What about the DDave bowl? I was going to get that one as a replacement anyway.
That tube sounds good btw but where do they sell that for an affordable price? Because I know normal replacement tubing for a EQ costs waaay to much at EQ resellers.

I was looking at a review of someone doing a few rips with the D020-D but it took him a while to fill it up, bout 15 sec and then inhaling. I'm pretty much done after 7-10 sec including inhaling.

Here's the vid:
 
Last edited:
TheMedicalStoner,
  • Like
Reactions: DDave

Anony Moose

Active Member
It looks to me like the piece is filling up in 1-2 seconds there. 1-2 seconds in and that dude is already tasting vapor. He's just taking a big hit because he can. You'll be absolutely fine with a 7-10 second rip as you're gonna be tasting vapor 2-3 seconds in and the piece is so small that you'll clear it in well less than a second once you pull the adapter/wand from it.
 

But that's like 25 feet I might need uhmm 5 or something if I want to lay on the couch with my bubbler while my EQ's on the table. So what to do with the other 20 feet, might buy an aquarium or something lol.
If ur using the 25 feet it'll explain why the fan doesn't make your bubbler bubble though! lol jk.

What about the link I gave you, that seems alright right? 2 meters (a bit more then 5 feet) for 6 bucks. It looks legit aswell, even if it comes from china, it's food grade and most of our stuff comes from china even if we buy it over here hehe.

It looks to me like the piece is filling up in 1-2 seconds there. 1-2 seconds in and that dude is already tasting vapor. He's just taking a big hit because he can. You'll be absolutely fine with a 7-10 second rip as you're gonna be tasting vapor 2-3 seconds in and the piece is so small that you'll clear it in well less than a second once you pull the adapter/wand from it.

Ahh yeah you're kinda right, I wasn't really paying attention to the fact that the vapor cloud isn't even getting any denser in the chamber after, like, 3 seconds.

I generally fill my cyclone bowl 1/5th full (or pack an elbow) or something, turn it on, wait 10 minutes, take 2/3 long hits, turn it off while keeping my finger on it and take one last little drag from whatevers left just because I don't feel like wasting weed (not that it matters, got more then enough, I'm just cheap lol). I'm pretty sure just 1 long drag gets me ripped already, I never really waited for it to kick in to be honest. It's weird, they aren't able to properly sedate me with high narcotics (even for surgery and such) yet I'm baked after 1/3rd of a joint filled with nearly no weed lol.
I'm usually able to get high 3 times from 1 fill, then it's a bit light brownish (so not even proper ABV) and I throw it in my ABV baggy already.
 
TheMedicalStoner,

jojo0420

Cloud Chaser
@TheMedicalStoner i bought 25' so I could change it from time to time. I'm usually a bit skeptical about stuff from China, my biggest concern is that it does get quite warm. Is the temp rating up to spec? Who knows. I don't want inferior tubing off gassing something unknown due to high heat.
I also like to experiment, I have found the shorter the whip the more flavor the vapor retains.
 
jojo0420,
@jojo0420 yeah I figured you used the rest for testing and replacement, I was just kidding really :p.

As for the Chinese one, yeah it's up to temp code 500F and FDA approved material.
I have a lot of stuff from china actually, most of it are e-cig mods and clones. What i've noticed shopping in china is that, unless specified otherwise, the descriptions are usually correct.

Customer service in China is atleast 1000 times better then any form of western curstomer service because they really want our validation because that will increase their sales, if something broke they usually ship new stuff right away and give whoever packed it 10 lashes lol. It's just really different from here.

As for health stuff, like I said, I have a lot of chinese clones of 500 bucks atomizers for 30 bucks. It differs from factory to factory how perfect your model will be but if you buy a fully stainless steel tank you can expect it to be fully stainless steel, it CAN however be 304 stainless steel instead of 310 we use here. Is it a health danger? No, it isn't. It's just really slighly inferior material. They Anodize (metal on metal coating done by a magnetron, it's what they use in space) stuff for a few bucks which costs tons over here yet the anodization is seriously perfectly done and it doesn't come off. I've actually seen that happen with western products, never with a chinese product.

All of the silicone I've had come with it is really top notch stuff. I didn't do a chem test but I know there are people that did and I've never seen anyone report anything even remotely toxic.

The only thing Chinese people seem to safe money on is screws. If you buy a full stainless unit you can expect crappy screws in it, I've even had galvanized screws in one of my atty's, you should always take those out. I have no idea why they do that but that's they only thing I've found that they often save money on.

What you do get free with any metal chinese product is machine oil, lots and lots of machine oil lol. Always wash everything you get out of china and soak it in alcohol for a bit. They usually sell stuff preassembled, like, an e-cig with a heating coil in place and such already with silica wick, lol, you seriously don't use that, you pull it out and you clean it first. People have learned that the hard way, you will taste motor oil for the rest of the day if you don't lol.

IMO you can safely buy stuff from china. You see stuff in the news about 1 factory making toxic kid toys but what they don't tell is that china is GIGANTIC and that there are a sh*tload of little factories that all work for themselfs instead of a giant corporation preforming health checks so, yes, you can have a rotten apple but the chance is very very slim.
And we're talking about silicone here now, that seriously costs nothing to make, even less for them. If they spend slightly more on FDA approved chemical processes they sell about 50x more of it yet pay nearly the same for making it so I'm pretty sure it's the exact same stuff we buy here (which comes from china aswell but gets tested, at random, here first and then sold for 5x the price they bought it). :)
 
TheMedicalStoner,
Last edited:
TheMedicalStoner,
And one other question, would this SSV wand work on a normal cyclone bowl and normal elbow pirece? http://www.ebay.nl/itm/NEW-OEM-STAN...t=LH_DefaultDomain_0&var=&hash=item3f3e0387c4

Also, will 3/8 tubing fit on it? And can it just stand up straight in the cyclone bowl without the chance it'll fall out?
I was checking a vid of the SSV (there are no vids of anyone using an SSV wand with the EQ) and you have to sort of hold it against the SSV unit but it stays loose so I was wondering if that's the same case if you put it in your cyclone bowl, I seriously just don't get how it works.
I want to be able to put it in, pick up my bubbler and just sit on the couch with it while the thing stays in without me knocking it over or anything so, is that possible?
Like I said, I don't get it xD.

And uhmm can someone please check this tubing, I just ordered it, 3 x 8mm but I think it's the wrong ID and OD, I didn't think about converting from US to metric, god I hate that... http://www.ebay.nl/itm/321335857328?var=510238881454&ssPageName=STRK:MEWN

Pfft I calculated it myself, I need 9mm ID and 12mm OD if I'm not mistaking (if someone could check, thanks), I had to open a paypal dispute and everything, dmn what a ton of work to cancel an order....
Hope I get my cash back. Sucks though because the size I think I need costs 4 bucks more for 2 meter lol.
 
Last edited:
TheMedicalStoner,

ichibaneye

Vapriot, Traveler & Vaporizer/ing lover!
I have been searching this thread for a bit now and decided to to ask because I still had a ton of pages to read. I wanted to know if you guys have found or know of a place I can find replacement glass for my EQ? When I say replacement I mean like not so brittle, stronger quality elbows and the like. I was surprised out how fast both of the elbows broke very quickly. However before failure everything worked great. :tup:

So...... In the mean time to keep things rolling while I try to locate better replacement parts I scavenged the glass globe from a pen style vaporizer, inserted one end of the whip into the glass globe and in the other end of the globe I inserted the screen from the EQ's broken elbow. It is a PITA :\ to hold the globe/whip over the cyclone bowl the whole time but I still have a full glass AP for the time being. :rockon:Thank and cheers all!
 
ichibaneye,

Tweak

T\/\/34|<
I wanted to know if you guys have found or know of a place I can find replacement glass for my EQ? When I say replacement I mean like not so brittle, stronger quality elbows and the like. I was surprised out how fast both of the elbows broke very quickly.

I get my WPA/Elbows from Oregon Glass Blower. Nice thick, quality glass.

pImTUf3l.jpg

Top is OGB, bottom is Epicvape elbow, which is pretty similar to the EQ elbow. You can really feel a difference in their weight.
 

ichibaneye

Vapriot, Traveler & Vaporizer/ing lover!
I get my WPA/Elbows from Oregon Glass Blower. Nice thick, quality glass.

pImTUf3l.jpg

Top is OGB, bottom is Epicvape elbow, which is pretty similar to the EQ elbow. You can really feel a difference in their weight.

I am headed to check them out right away and thank you for the link/info.

Also it is the 18mm size correct?
 
Last edited:
ichibaneye,
Guus 3/8 ID 1/2 OD, which is needed for the SSV wand, is equal to ID 9mm OD 12mm right? I calculated it myself but I just want to be sure itll actually fit.
 
TheMedicalStoner,

Justpassedu

Well-Known Member
I get my WPA/Elbows from Oregon Glass Blower. Nice thick, quality glass.

pImTUf3l.jpg

Top is OGB, bottom is Epicvape elbow, which is pretty similar to the EQ elbow. You can really feel a difference in their weight.
+1 , I also get some glass for them. It is thicker and much better quality than stock. His elbows work great for me and the extreme q .
DDDA8328-42F1-437B-9E4C-7CF08F7CF9CF_zpsk3s4hpay.jpg

You'll see the stock elbow hooked to my bubbler and the ogb elbow attached to my Dave adapter . I love that the glass is clear also Bc I can see all my vapor traveling through it.
 

Twisted0815

New Member
Hello,

im new here and also just bought an extreme q.

Since the Ssv Wand and DDave adapter are not available here i needed to improvise.

I have mailed the polish company mentioned in this thread if they can make these things.

But until then i came up with a pretty good solution.

Ordered a new tube, mouthpiece(huge), and single cyclone bowl type of thing.

The herb is 1cm over the heater or so.

2x 18.8 male to tube adaptors should arrive next week.

im lucky the tube fits perfect into a female 18.8.

The airflow is much improved.

The mouthpiece is bigger than i expected though just had seen the picture and ordered :) schould have checked the size... but its quite nice actually.

image9e655.jpg
 
Last edited:

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
I mostly use my Solo, but it went down a few days ago. I would have used my trusty EQ (which I have had for five years), but the heater cover was broken(cat attack). I had the replacement heater cover, but had put it in "a safe place" till I had time to figure out how to install it properly. So obviously I could not find it when needed.

So I tried blazing herb out of the bowl on the D020 bubbler. Just about died.
I hate combusting!

I noticed that the adaptor for the glass nail globe (in the D020 kit) was about the right size to fit over the heater core. Tried it, worked a bit; but only whispy hits since there was air leakage. So I disassembled the EQ and on a lark decided to try that piece where the heater cover goes. This is what I found:
eqmod.jpg


The adapter fits like it was made for it. I put the screen back over the top of the heater core and reassembled.
It works fine, it will get me by till I can replace it with the factory heater cover.
One advantage is that the glass is a lot thicker, I doubt if it will break as easy as the regular heater cover. Disadvantages may be longer heat up time and the need to use a higher temperature due to an increase in distance from the heater to the herb chamber. Perhaps using the DDave adapter would get the distance closer to stock. I found it was usable for me at 464 F with this configuration.
I also use a Solo straight stem with grommet instead of the whip:
solostem&eq.jpg

solostem&eq2.jpg

although I would like to replace that with the SSV wand.
 
Last edited:
Top Bottom