• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

ataxian

PALE BLUE DOT
Can I get some of your guys advice . I want to get a glass bubbler to pair with a Arizer Air And Crafty . Just from looking through this thread I was thinking like a d020-d , a Gb186-1(maybe to big for the crafty and Air), and of course a FC-187 . Now I know no one has a FC-187 yet ,but theoretically would a crafty or a air be sufficient to use with this piece and get proper hits ? Also I am very new to glass and I'm trying read and learn as much as I can , but any recommendations of other pieces with links through dhgate would be extremely helpful . Very Excited to add GAS to my new VAS problem .

Also I asked the seller what the joint size was and he said 18.8mm .So to make my crafty work with this unit I had to hack off the bottom of a spare cooling unit ,and I need a glass fitting to attach to the top. How specific is glass joint size ? Like will a 18 or 19mm joint work in a 18.8mm joint , or do I need an exact 18.8mm ? Where is a good place to buy these joints, Since I had to destroy a $20 cooling unit I want to make sure I put a good quality adapter on it. The Air I have a PVHES 14mm GonG stem so I probably need the same glass piece used backwards to get that to work . Thank you for any insight you may be able to share
Bubblers - ash collector with jhooks for portables!
Hydro tubes I ever had luck with.
 
ataxian,

hanfhead

is high
Grabbed a d020-x to use my coupon since it expires tomorrow. It is like the d020--2-w but not a sidecar. I love the d020--2-w and use it daily. Only problem is when company is over hitting it on the desk, everyone has to squat to hit it. I was going to buy another *--2-w anyway so I figured I might as well try something different, but still the same.

D020-X
NtLgSI3.jpg

http://www.dhgate.com/product/d020-x-glass-water-smoking-pipe-with-two/192446141.html


D020--2-W
6OzSP4r.jpg

http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/193620248.html
 

oli

Well-Known Member
Can I get some of your guys advice . I want to get a glass bubbler to pair with a Arizer Air And Crafty . Just from looking through this thread I was thinking like a d020-d , a Gb186-1(maybe to big for the crafty and Air), and of course a FC-187 . Now I know no one has a FC-187 yet ,but theoretically would a crafty or a air be sufficient to use with this piece and get proper hits ? Also I am very new to glass and I'm trying read and learn as much as I can , but any recommendations of other pieces with links through dhgate would be extremely helpful . Very Excited to add GAS to my new VAS problem .

Also I asked the seller what the joint size was and he said 18.8mm .So to make my crafty work with this unit I had to hack off the bottom of a spare cooling unit ,and I need a glass fitting to attach to the top. How specific is glass joint size ? Like will a 18 or 19mm joint work in a 18.8mm joint , or do I need an exact 18.8mm ? Where is a good place to buy these joints, Since I had to destroy a $20 cooling unit I want to make sure I put a good quality adapter on it. The Air I have a PVHES 14mm GonG stem so I probably need the same glass piece used backwards to get that to work . Thank you for any insight you may be able to share

Can the Air and the Crafty handle the GB-186... for the Air I do not know but for the Crafty you might want to check this post

http://fuckcombustion.com/threads/the-crafty-by-storz-bickel.15984/page-93#post-705838

The GB-186 in full glory, well almost :rofl:

As regards to the joint, I cut a male to male adapter but a simple 18.8 to 14.5 reducer will do the trick

http://www.dhgate.com/product/18mm-...ducer-adapter/184053538.html#s1-6-1|388362659
 

nihil

Member, Known Well
Grabbed a d020-x to use my coupon since it expires tomorrow. It is like the d020--2-w but not a sidecar. I love the d020--2-w and use it daily. Only problem is when company is over hitting it on the desk, everyone has to squat to hit it. I was going to buy another *--2-w anyway so I figured I might as well try something different, but still the same.

D020-X
NtLgSI3.jpg

http://www.dhgate.com/product/d020-x-glass-water-smoking-pipe-with-two/192446141.html

That is my 2nd favorite piece (followed by the GB-187). Great perc for general use, the splash guard works nicely, it's easy to clean, and I like the size of the can when paired with my enano.

I also have the sidecar version and hate craning my neck to use it. Since I procured this guy, I haven't used the sidecar to often.

My only complaint is the male joint. I believe yingman has a female version, but a female GonG from @VaPeD&CoNfUsEd solved this problem for me.

Great piece, worth getting if you are on the fence about it.

Edit: Image with JoDa GonG:
7FTHZGc.jpg
 
Last edited:

hanfhead

is high
I am okay with male and prefer it. I use a highly educated infiniTi nail with my enail. Using a male to male on most pieces raises the nail too high to see. And the infiniTi works on anything, male or female / 18 or 14, but using the it in a female joint makes me nervous. IMO, all the heating up and settling further into the joint is asking to get stuck or crack.

Thanks for the pic. I need one of those vaped&confused gongs for my dad. I am pretty sure they would work for the herbalaire, anyone know for sure?
 
Heads up, domeless quartz bangers in any joint size(female) for under 12$ from Kathy
http://www.dhgate.com/product/100-r...e/214897874.html#myaccount_orderdetail-1-null
4PuBO9A.jpg

I wonder if she just has the clear joints even though a frosted one is in the pic. Another well known site has had these forever but I remember the clear one joint being cheaper than the frosted one or the cooler style that prevents sticking with that "down tube" thing. It a glass tube on inside of banger to prevent the claim from building up and sticking to your joint on these female nails. Here is an example I can't vouch for either seller:

http://www.ebay.com/itm/14mm-FEMALE...313?pt=LH_DefaultDomain_0&hash=item19f7d02759

Here is the deep dish banger link on ebay expensive but wanted everyone to see dish

http://www.ebay.com/itm/10mm-18mm-Q...395?pt=LH_DefaultDomain_0&hash=item4ae06e5e53
 
ConstanlyConcentrated,
  • Like
Reactions: vapordab

ataxian

PALE BLUE DOT
Man, those bubblers are incredibly sexy, I wish I would have done some research before I ordered one last week.

I got the El Nino by Black Leaf from Grasscity. Gonna take forever to get here, and paid a bit more than those listed, nor do I like it as much as some of the above :/ sad camper
The bubbler coming is a good one!
Sounds like you need glass in general
 

HellsWindStaff

Dharma Initiate
The bubbler coming is a good one!
Sounds like you need glass in general

I do :/ I have a little bubbler that can't use any attachments because its design...(A sherlock? For lack of a better description) and I had a nice big bong but the perc just broke in the 2nd chamber so its not nearly as sweet anymore.

I'm glad I made a good choice though, that lil Nino looks sweet, just wish I could have saved some extra cash getting one of the above.
 
HellsWindStaff,
  • Like
Reactions: BoogerMan

jambandphan03

in flavor country
Got the honey stem 14mm Ti nail today, so I was able to put this together with the pinnacle water tool, works pretty good IMO, I am vaping oil from the sublimator :D very happy to have this in my collection! I like having 2 parts, just have to be sure to hold the lower portion so it doesn't drop out. I want to eventually get a one piece, like the V2 they are selling, but I am being extra cheap right now and went for the single nail, since I have all these parts just sitting around. The stand works pretty well too, from @Pipes

http://www.dhgate.com/product/necta...d/211435811.html#myaccount_orderdetail-1-null

 
Last edited:

DieHard

Accessory supplier
Accessory Maker
Got the honey stem 14mm Ti nail today, so I was able to put this together with the pinnacle water tool, works pretty good IMO, I am vaping oil from the sublimator :D very happy to have this in my collection! I like having 2 parts, just have to be sure to hold the lower portion so it doesn't drop out. I want to eventually get a one piece, like the V2 they are selling, but I am being extra cheap right now and went for the single nail, since I have all these parts just sitting around. The stand works pretty well too, from @Pipes

http://www.dhgate.com/product/necta...d/211435811.html#myaccount_orderdetail-1-null

Looks easy and efficient. But I don't know about the hot nail in the silicone container. Even if it doesn't quite touch it. One jiggle or hiccup and :puke:
 

jambandphan03

in flavor country
didn't touch the silicone, had a huge blob of oil in there, thick and hard like candy. I can see your concern. I thought that was high temp silicone too...?? not gonna find out the hard way :p I updated the video with a glass dish, hope that makes you feel a little less :puke:

:razz:
 
Last edited:

nihil

Member, Known Well
I got my D020 and D020-D from sunshinestore today. ~15 days after order.

tumblr_ngnfey8cVv1ttxsy3o1_1280.jpg


I cant use them with my portables until I get another 18-14mm adapter, but they work great with the volcano :) http://instagram.com/p/wpgKLcrGGx/

Beautiful.

But the one on the left isn't a D020, anyone know what it is? The one on the right is a D020-D.

I had the D020-D until I decided to gift it to my dad. At the time it was one of my favorite pieces and I wanted to hook him up.

I kind of want that one on the left now. How does it function? How's the splash back?
 

BuzzDanklin

Well-Known Member
Beautiful.

But the one on the left isn't a D020, anyone know what it is? The one on the right is a D020-D.

I had the D020-D until I decided to gift it to my dad. At the time it was one of my favorite pieces and I wanted to hook him up.

I kind of want that one on the left now. How does it function? How's the splash back?

Haha that is great, I was too excited to see or realize I got something else :) It looks like the D021, however sunshinestore's listing for the d021 has been removed, bit confused, but happy nontheless.

The D020-d draw is very smooth, and bubbles are light, they remind me of chocolate milk bubbles :). The D021?? requires a harder draw, but you can also pull much faster without getting splashback. I think the D021 works great with something like the volcano where I can take my full draw in a few second. The D020-D will probably be better for slower drawing vapes and portables.
 
Last edited:
BuzzDanklin,
  • Like
Reactions: nihil

BoogerMan

Well-Known Member
I got my D020 and D020-D from sunshinestore today. ~15 days after order.

tumblr_ngnfey8cVv1ttxsy3o1_1280.jpg


I cant use them with my portables until I get another 18-14mm adapter, but they work great with the volcano :) http://instagram.com/p/wpgKLcrGGx/
Hey @BuzzDanklin! If you don't like holding or having to pick up and put down the volcano bag check out how I have mine rigged up:

Here is a pic of it attached (forgot to include one in my original post).

image_zps2a3ad1f8.jpg


Here is the original post about how I have it set up:

I know some people have stopped using their volcano so I hope this helps change your mind ;)

The reason why I like the bag is because I fill it, I attach it, and then I can take it around the house with me or outside, etc.

I know some people think the bag is weird but you get used to it. I used turkey bags from wal mart. They are food grade and oven safe up to like 500 degrees so they should be good to store 370 degree vapor for 15 minutes while I puff away at it.

There is also zero drag with my method and the volcano bag. I can get the vortex action from a turbine perc like some of you are trying to get :) see vid below. I know some portable vaporizers have a good amount of restriction (I own the solo so I am referring to that but I'm sure there are other options with more airflow) so that is why I like the bag. Feels like I am clearing my piece when I take a hit. It is like breathing normal lol.

I also like my volcano because I have owned it for about 6 years now and I have not had one problem with it. I have not replaced one part besides the bags and filter. I even left it on one night for 10 hours and it still runs like it is new.

Vortex from a double honeycomb to turbine. Looks better in person but you get the idea lol.


I forgot to include a link to the 90 degree adapter I have:
http://www.ioffer.com/i/18mm-glass-on-glass-angle-converter-90-degree-18-18-16-554526386

I know it is a little pricey but OGB makes a solid adapter. You can tell it is really high quality.

Some cheaper options I have seen on eBay. Unfortunately these weren't available when I bought the more expensive adapter :/

If using a female joint waterpipe:
http://www.ebay.com/itm/121343288413

If using a male joint rig:
http://www.ebay.com/itm/251442397676

And the exact tubing size I used is:
3/4 inch diameter including the tubing thickness
Tubing thickness 1/16 inch

If you have the solid valve volcano setup this should fit perfect around the metal part where the mouthpiece normally snaps on. Dont fill the bag up all the way. This allows you to push in the bag and hold your finger on the inside of the metal valve so when you place the tubing on it doesn't push in the metal valve. And after placing the tubing over this metal valve, if you push in the tubing it will push in the metal piece and it should pushed in until you pull it off. I hope that makes sense. Kinda hard to explain lol. Here are some pics to help.

First getting the piece on and using your finger to hold the inside of the metal valve:
image_zpsc8f627ff.jpg


Fitting over the metal piece but not pushed in:
image_zps4f63055b.jpg


Fitting over the metal piece and pushed in:
image_zpse0b79024.jpg
 

nihil

Member, Known Well
Haha that is great, I was too excited to see or realize I got something else :) It looks like the D021, however once you click it, the listing has been removed?

The D020-d draw is very smooth, and bubbles are light, they remind me of chocolate milk bubbles :). The D021?? requires a harder draw, but you can also pull much faster without getting splashback. I think the D021 works great with something like the volcano where I can take my full draw in a few second. The D020-D will probably be better for slower drawing vapes and portables.

Good to know, thanks for the info.

Looks like you got a rare one, it's not the D021 either. The D021 is taller with a honeycomb perc lower than the matrix perc. I just checked SSS and what you have isn't listed anymore.

Regardless, thanks to your post, I've been reminded that I need to replace that D020-D. :cheers:
 
Top Bottom