The Mighty/Mighty+ by Storz & Bickel

majher

majher

Well-Known Member
herbivore21 said:
Ok, so I am looking at the Mighty as a potential solution to my portable flower vaping needs.

Tell me guys, honestly, can the Mighty fit in large side pockets on a pair of jeans. If a 5/6 inch phone can fit in my pocket, is this really not pocketable - or just less pocketable than the crafty?

I need a vape that can keep up with my tolerance for flowers (which can easily be sky high thanks to my Sub on home vaping duty). I do not need something that looks super stealthy, but I need to be able to fit this in a large pants pocket.

I would get the crafty but the battery life sounds absolutely out of the question for my high-tolerance/high heat needs. Further to that I don't use Android or iPhone and have 0 interest in doing so - and I do want temp control lol.

Logic says get the mighty for every single reason except that it might just not be pocketable.

So people, can this actually fit in your large pants pocket? Perhaps somebody take a photo with their mighty in their pocket if it is not too much trouble? :D
Click to expand...


I always put mine in my pocket heres it compared to my phone.

Z4OUXdR.jpg
 
Last edited:
redijedi808

redijedi808

Well-Known Member
herbivore21 said:
Ok, so I am looking at the Mighty as a potential solution to my portable flower vaping needs.

Tell me guys, honestly, can the Mighty fit in large side pockets on a pair of jeans. If a 5/6 inch phone can fit in my pocket, is this really not pocketable - or just less pocketable than the crafty?

I need a vape that can keep up with my tolerance for flowers (which can easily be sky high thanks to my Sub on home vaping duty). I do not need something that looks super stealthy, but I need to be able to fit this in a large pants pocket.

I would get the crafty but the battery life sounds absolutely out of the question for my high-tolerance/high heat needs. Further to that I don't use Android or iPhone and have 0 interest in doing so - and I do want temp control lol.

Logic says get the mighty for every single reason except that it might just not be pocketable.

So people, can this actually fit in your large pants pocket? Perhaps somebody take a photo with their mighty in their pocket if it is not too much trouble? :D
Click to expand...

Well, I'm not the biggest guy and I wear size 30/non skinny jeans so my pockets are pretty roomy.

But, I never carry mine in my pocket and it was interesting to actually try it.

Anyways, here you go:)
2ik5ycl.jpg

1tsz1x.jpg

107vyo2.jpg
 
H

Halfqq

Formerly Highland7
I love my mighty

I notice residual smoke or something though. I used some shatter on the pad a few days ago, and every since then I notice if I heat it up with an empty chamber, there's is a little bit of smoke coming out (when the cooling piece is removed). I can actually gets smoke from the mighty without a load in there? Do you think some of the shatter dripped down into the core of the unit? The smoke doesn't really take like plastic or anything, I think the smoke seems to be getting less and less too ... Maybe my unit is just dirty?
 
Halfqq,
EAG1E4

EAG1E4

Member
Highland7 said:
I love my mighty

I notice residual smoke or something though. I used some shatter on the pad a few days ago, and every since then I notice if I heat it up with an empty chamber, there's is a little bit of smoke coming out (when the cooling piece is removed). I can actually gets smoke from the mighty without a load in there? Do you think some of the shatter dripped down into the core of the unit? The smoke doesn't really take like plastic or anything, I think the smoke seems to be getting less and less too ... Maybe my unit is just dirty?
Click to expand...
Doesn't the Mighty come with a pad for wax/oils? Pretty sure you are suppose to use that or it could end up the way you just described it.. Don't quote me on that though, I'm still waiting for mine to arrive.
 
EAG1E4,
NickDlow

NickDlow

Log Hog
Yes the thick steel wool pads are for concentrates. It's possible there is some left in your unit. It prob not bad just do some empty burns till its gone.
 
NickDlow,
  • Like
Reactions: EAG1E4
NickDlow

NickDlow

Log Hog
Materials: extra cooling unit, hack saw, jb weld, a 19-14mm reducer, and sand paper.

Step 1: saw off the circle piece that connects to the mighty from the cooling unit.

Step 2: sand plastic piece flat and sand the glass to make it rough.

Step 3: mix jb weld apply even layer to glass.

Step 4: put glass on plastic a let it sit for 24hrs.

Step 5: enjoy some tasty water cooled Mighty vapor.
 
oli

oli

Well-Known Member
NickDlow said:
Materials: extra cooling unit, hack saw, jb weld, a 19-14mm reducer, and sand paper.

Step 1: saw off the circle piece that connects to the mighty from the cooling unit.

Step 2: sand plastic piece flat and sand the glass to make it rough.

Step 3: mix jb weld apply even layer to glass.

Step 4: put glass on plastic a let it sit for 24hrs.

Step 5: enjoy some tasty water cooled Mighty vapor.
Click to expand...

Cheers for the explanation, looking at the picture below and the ruler on the left side, do you cut it at 15 ? (sorry the numbers are tiny!!)

oQnpxr6.jpg
 
oli,
mixchu69

mixchu69

Well-Known Member
I have a quick question. How do you reinsert the mouthpiece to the cooling unit easily?

Taking it off was no problem but I cant snap it back on the cooling chamber. Does anyone have any tips I can use? I'm scared to break it because I am putting significant effort in it. Is there an angle? Thanks for the help.
 
mixchu69,
oli

oli

Well-Known Member
mixchu69 said:
I have a quick question. How do you reinsert the mouthpiece to the cooling unit easily?

Taking it off was no problem but I cant snap it back on the cooling chamber. Does anyone have any tips I can use? I'm scared to break it because I am putting significant effort in it. Is there an angle? Thanks for the help.
Click to expand...
Once you take it out, watch the small 6 trapezes, one or two will be slighty off symmetry, need to be realigned with the others by pushing towards the center

qQWnxAV.jpg
 
psychonaut

psychonaut

Company Rep
Company Rep
Push it straight in at the angle of the mouthpiece opening. The little orange tool can help you get it in by pressing in lightly on the tabs that are on the inside end of mouthpiece to help it snap back into place.
 
NickDlow

NickDlow

Log Hog
oli said:
Cheers for the explanation, looking at the picture below and the ruler on the left side, do you cut it at 15 ? (sorry the numbers are tiny!!)

oQnpxr6.jpg
Click to expand...

Yea 14 or 15 should work. You just need the piece above that mark. Make sure not to damage the swivel locking things (at 10 or so) that u twist to secure it on the mighty.
 
mixchu69

mixchu69

Well-Known Member
Thanks guys. I think this website is faster than ever contacting manufacturer. Everyone is so helpful.
 
mixchu69,
herbivore21

herbivore21

Well-Known Member
NickDlow said:
That's a Mighty fine choice @herbivore21 This thing is a beast!!

In other news I recived my spare cooling unit today and made the WPA mod thanks to @elmomuzz for the idea! I'll be enjoying water cooled Mighty vapor by 5 o'clock EST tomorrow.
C8BnTIF.jpg
Click to expand...
How did you do this bro? I seriously want one of these as a point of order for my mighty! :D

Edit: just found your instructions, do you know that JB Weld is safe in an airpath when exposed to heat?
 
Last edited:
herbivore21,
NickDlow

NickDlow

Log Hog
herbivore21 said:
How did you do this bro? I seriously want one of these as a point of order for my mighty! :D

Edit: just found your instructions, do you know that JB Weld is safe in an airpath when exposed to heat?
Click to expand...

The steps are listed above my friend

**Jb weld a nontoxic epoxy. Fyi

Yes it's safe up a constant 500 degrees Fahrenheit and 600 max

fwuwndb.jpg
 
Last edited:
psychonaut

psychonaut

Company Rep
Company Rep
I vaporized the abv and oils that clogged up my cooling unit a few days back, basically a free bowl and gave clouds for at least 15-20 from 180-200C.
 
psychonaut,
  • Like
Reactions: Roth
V

vapeape77

Well-Known Member
Just bought a Mighty from vapetownusa, 20% off, $375 total. My Alfa that I bought in October stopped working yesterday, gonna return it. This made me think, at this rate how many $200 portables am I gonna run through....
 
Been Vapin

Been Vapin

Fringe Class
vapeape77 said:
Just bought a Mighty from vapetownusa, 20% off, $375 total. My Alfa that I bought in October stopped working yesterday, gonna return it. This made me think, at this rate how many $200 portables am I gonna run through....
Click to expand...

$375.20 shipped might be too hard to pass up. How legit is this seller? Got my shopping cart info all filled out........

Guess they are legit? This is the only thing I could find.

http://ih.advfn.com/p.php?pid=nmona&article=62268124
 
Been Vapin,
V

vapeape77

Well-Known Member
Been Vapin said:
$375.20 shipped might be too hard to pass up. How legit is this seller? Got my shopping cart info all filled out........

Guess they are legit? This is the only thing I could find.

http://ih.advfn.com/p.php?pid=nmona&article=62268124
Click to expand...
Yeah I read about the owner , seems like a safe site to me, at least I hope hahaha. Actually I was surprised the code work since most seem to exclude volcano products on site wide sales. ThinK I tried every site out there...
 
Last edited:
herbivore21

herbivore21

Well-Known Member
Thought I'd just chime in to point out further to those considering this too big to pocket that at 7.5cm wide by 13.5 cm tall, my phone has the same dimensions (except depth of course) as the Mighty.
see video for source of measurements.

This will fit in your pocket just fine, just don't expect much else to.

So I'll work on a GonG connection, this thing is being ordered. I have been persuaded enough to purchase, time will tell if this is the final piece of my vape collection!
 
You must log in or register to reply here.
Top Bottom