• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

NorthernHuskie

Well-Known Member
@BoogerMan Yeah I think a bent neck or sidecar would be better. More comfortable and I get to watch my pieces bubbles while i'm smoking. Best of both worlds

Im pretty sure that it wouldn't be to hard for them to make interchangeable pieces though as I saw one that looked like http://www.hossglass.com/products/h033/

If they can figure it out I definitely buy a couple and they could also sell different downstems / attachable percs that you could swap out. Heres how Hoss glass did it, probably could use their pieces as design layouts http://www.hossglass.com/category/products/build-a-bong/
 
NorthernHuskie,
  • Like
Reactions: BoogerMan

Dramma Lamma

Looks like a job for!
People love these. Watch a vid for one they are very unique!!! I believe the hit is very smooth. I have no experience though. I WANT ONE
Edit: Watch this Vid:
It shows a lot going on with these diffusion pumps mainly at 45 secs in. If someone is going to duplicate it, they need to get all aspects down


Seeing the little plastic looking ball in the bottom there raises a concern for me. How will that plastic interact with cleaning chemicals? I'd be concerned it would absorb a flavor from strong cleaners and thus wind up making the whole piece taste off forever. This concern gets amplified WAY more when I consider a china made knock off and them using an air-soft BB or some shit inside there. What is the real bates and worm ball made out of? Looks kinda like a plastic or perhaps a stone of some kind.


Also I will agree with @BoogerMan straight tubes are not as nice or comfortable, sidecar or bent neck all the way now.
 

Monsoon

Well-Known Member
Seeing the little plastic looking ball in the bottom there raises a concern for me. How will that plastic interact with cleaning chemicals? I'd be concerned it would absorb a flavor from strong cleaners and thus wind up making the whole piece taste off forever. This concern gets amplified WAY more when I consider a china made knock off and them using an air-soft BB or some shit inside there. What is the real bates and worm ball made out of?


Also I will agree with @BoogerMan straight tubes are not as nice or comfortable, sidecar or bent neck all the way now.
In the real one it's a glass ball.
 

Dramma Lamma

Looks like a job for!
If it's glass that's all good then, It just really looks plastic like to me in that video.

Can we ensure that the Chinese manufacturer understand it should be glass?
 
Last edited:

vapordab

Medical+FC=Recreational
I never thought that an upgrade would exist for my GB-186-1 and D020-w female version. It feels like they were both made for the nano!

but...after seeing this new FC-187... Count me in for two of them. I can already tell that it will be an upgrade :love:
 

Aaron

Well-Known Member
Well considering the Mothership Seed of Life percs are laser cut, I doubt we will see any Chinese knockoffs any time soon
But they might be able to do something like the SGW waffle perc, which is very similar
They're trying lol. Seems like a few more weeks till they polish things up or get close but I'm really interested in getting cheap eggs. Just mentioned this to a supplier 2 days ago and he started to test things out.

He also mentioned it's hard for them to do laser cut designs so I'm not expecting much..
k0FRQsg.jpg
 

Delta3DStudios

Well-Known Member
Accessory Maker
I never thought that an upgrade would exist for my GB-186-1 and D020-w female version. It feels like they were both made for the nano!

but...after seeing this new FC-187... Count me in for two of them. I can already tell that it will be an upgrade :love:

Lol, by my count we're over 20 buyers right now, plus another 10-20 from the FC lurkers (:wave:). Yeah, it'll probably sell out the first day it's available! (@blankrider PLEASE let us know if you get any advanced notice when it's available!)

Just watch, I'll see this piece in my LHS in the near future (I've seen the GB-186 list for $275, the GB-187 list for $250, and the D020-w for $165) - I'd love to point at it and laugh at their outrage price then tell them how we designed it and even put a list price on it!
 

cybrguy

Putin is a War Criminal
OK folks here it is. The FC-187 available for sale soon....
other_949069651_00.jpg

other_949069701_00.jpg

other_949069730_00.jpg

and for the amazing price of $40

OMG. Dude, you have DONE IT. I have been out of this thread for weeks because I am really not in the market for more glass UNLESS WE GET A 187 SIDECAR! How fucking cool. Where do I send my money?

I think I just found the best Peyote Piller video.

Wow. Never saw one of those before. Very cool...

Edit: Hey! @blankrider We need some kind of beeper or something to let us know when this (FC-187) is available. Don't want to miss the first ordering opportunity...
 
Last edited:

EverythingsHazy

Well-Known Member
I never thought that an upgrade would exist for my GB-186-1 and D020-w female version. It feels like they were both made for the nano!

but...after seeing this new FC-187... Count me in for two of them. I can already tell that it will be an upgrade :love:
Been looking at it, but don't see how it is an upgrade to the gb-186. That's pretty much a perfect piece for the nano. Not having the nano attatched to the can is nice too.

Also, just curious, what's the fuss with mouthpieces on the side. I like pieces that are symmetrical. More balance/stability. Hope they never change the design of the gb-186, aside from straightening out the mouthpieces and percs. Shouldn't be to difficult.
 
EverythingsHazy,

ChippyMalone

Be here now.
Accessory Maker
People are people!
My piece made in California is not straight however works well anyway.
No pictures of this one however it's used a lot!
My Washington state blown oil rig is shoddy and sloppy compared to the GB-187 that was delivered to me this week. Whoever worked mine was definitely a highly skilled craftsman.

I had a highdea tonight that a DHGate seller would be clever to name their store "Cheap High Quality Bubblers".

@blankrider you can count me in on two of the sidecar 187's. The mouthpiece height will be perfect for when I must vape while laying on my back. The GB-187 is just a little too tall to recline and vape comfortably, but otherwise everything I want.

Anyone wanna buy all the other not quite right bubblers I bought before I found this? (joke, not wts)
 
Last edited:

alltoreup

Damn you, party liquor
@blankrider many thanks for all your efforts. I'm definitely in on the FC187 because...you know... I need another piece:brow:
I will say though, you might reconsider the hydratube when requesting pieces. It may be limited to a specific market but so is the PNWT knockoff and it is carried by several stores IIRC and is still selling. A bent neck 18 mm HT with ice pinches is probably easier to produce than some requests I've seen tossed around. Just sayin...:p

Also want to say that my GB-242 that I got yesterday, in 8 days, by the way,is a tiny little lung buster. My dropdown hasn't arrived yet so I've lego'ed together something to fit my male nail( giggity) and it still blows my head off. The vortex is unreal. It is thin glass like has been mentioned, but its still easily one of my favorite dh gate pieces.
 
Last edited:

vapordab

Medical+FC=Recreational
Been looking at it, but don't see how it is an upgrade to the gb-186. That's pretty much a perfect piece for the nano. Not having the nano attatched to the can is nice too.

Also, just curious, what's the fuss with mouthpieces on the side. I like pieces that are symmetrical. More balance/stability. Hope they never change the design of the gb-186, aside from straightening out the mouthpieces and percs. Shouldn't be to difficult.

Its all preference, but I often wish that the 186-1 had a little bit less diffusion for use with the nano. I also prefer a slightly smaller can and base for daily use

I agree that it has an amazing design to use with any vaporizer, and is a very aesthetic bubbler. I wouldn't trade it for any other chinese piece. Its a permanent part of my arsenal.

What I consider an upgrade may not be for different tastes
 

Delta3DStudios

Well-Known Member
Accessory Maker
Its all preference, but I often wish that the 186-1 had a little bit less diffusion for use with the nano. I also prefer a slightly smaller can and base for daily use

What type of perc does your GB186 have? Dose it have one or two horizontal bands? Does it have the same perc as the GB-187 and FC-187, or like the D020-W with only a single band?

I recently saw a piece at my LHS which looked identical to the GB-186 I've seen Yingmin sell, but it had the same perc as my D020-W which would mean it has slightly LESS diffusion than your piece (about 33% less).

I'm sure if you look hard enough on DH-gate, you'll find two different versions of the GB-186.
If I come across it online, I'll shoot you a link, there are a ton of sellers selling that design under different names (Marrte is one of them)
 

Delta3DStudios

Well-Known Member
Accessory Maker
My 186 from yingmin has double bands on both percs

That's the crazy part - I almost wanted to take a picture because when I looked at it - I immediately recognized it had the wrong perc for that piece - It was identical to my D020-W single band birdcage.

Yingmin's GB-186 absolutely has a much nicer double-banded birdcage perc. Otherwise the piece at my LHS was identical. Two single-banded birdcage percs, same flared mouthpiece, no logos, nice thick glass. Except it had a $275 firm price tag!

Tried searching DHgate for the same piece, but I couldn't find it
 
Top Bottom