• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

JoDa Glassworks

smokum

I am who I am and your approval isn't needed!
Ok, I've gawked long enough..... This will be my FIRST ever non scientific plain clear glass purchase ever, as I've never found heady type pieces appealing in the least... until now, with this type of basic yet classy accenting (see link mentioned below).


@VaPeD&CoNfUsEd
1st, do you ship to Canada ? USPS bombproof ? I'd be willing to prepay to help out, but not sure how to go about it since I only have PayPal, Amazon, and a Visa as a means.

Should you accept this mission (hehe, always wanted to use that), this is my interest 1st time round until I see more about the Quartz Honey Buckets....

I'd REALLY like THIS for my Solo(s), but for the 'nubs' I'd like them to be evil'ish eyeballs to stare back at me when hitting it from the long end, the short end to be a graduated vape hose connector (both end black accented as in the pic), and a 'deep blood red' accent bubbling upwards over the weld area from the Solo chamber insert.

Is that possible ? If so, kindly advise how we can make this happen.

TIA
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Ok, yes I ship wherever someone wants to pay to have their order shipped. (I should have mentioned in my previous post that the Black Friday free shipping offer was US only. I will knock 5$ off for the misunderstanding though). The link took me a few posts up but I assume your talking about the black lipped steamroller. Correct? The eyeballs are very doable. You want the short end to be tapered so you can hook a hose up to it? If so, are we talking ssv size hose? The deep red on the weld area though is iffy especially for a solo. That's already a stressed area in the glass and I need a specific outside diameter in that area for the solo to fit properly and work there would possibly distort it. @smokum
 

smokum

I am who I am and your approval isn't needed!
@VaPeD&CoNfUsEd

No worries man, I naturally didn't assume it was outside the USA. So, although it's greatly appreciated.. a reduction in shipping cost is really unnecessary ;)

Yes SIR... black lipped steamroller is THE ONE :bowdown:
The taper I imagined is one that would be multi-ridged to fit the basic common hose sizes to a GonG to a WP (this would also allow me to use as well as a mouthpiece for my Herbalizer or my Sublimator ;) )
Any of the three device uses allows me a carb action one way or another :tup:
Hmmm... bummer about my vision of the blood red bubble at that joint :cry: Do you have any possible artist's vision that might work while keeping the piece 'classy' ? :uhoh:
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I don't think I'd be able to step it down multiple times. So no multi ridges. I'm thinking one smooth taper that would allow any size hose the bigger the hose the further up you push it.
 
VaPeD&CoNfUsEd,

smokum

I am who I am and your approval isn't needed!
I don't think I'd be able to step it down multiple times. So no multi ridges. I'm thinking one smooth taper that would allow any size hose the bigger the hose the further up you push it.

That should be fine, as I use silicone hoses anyways.. so it has gripping power on the cooler non-direct heat end and should hold. Perhaps a minor slight lip/ridge on the end tip area ?

How do we do this for payment ? Should I pm you my shipping info at this point so you can give me a total amount and process once you come up with something for that deep blood red idea ?
 

DieHard

Accessory supplier
Accessory Maker
@VaPeD&CoNfUsEd
Hey bro Happy Thanksgiving! I'm here to do my part! I need 2 carbed adaptors for my enail. I really need to be able carb some fresh air into the milky dab goodness. I will pm details. Also on a less happy note, my beloved dish/Dabber holder broke. The dabber holder arm broke off clean at the base. AND Mrs. Diehard accidentally broke the loop off of her eyeball pendy. I actually have another pendy with the same break. Can these be repaired. I will prepay all shipping and whatever it costs to repair. (If it is even possible to fix.)
 

smokum

I am who I am and your approval isn't needed!
And so the great anticipation and waiting game begins :ugh::popcorn::D

I'm so confident, from seeing the items that have already been produced, that I'm bound to be amazed and extremely satisfied with what transpires from the JoDa mind & workbench given my instruction of wants and expectations :nod:

Plus I'm so glad to have the opportunity to support an established FC member who just happens to also be an up & coming glass blowing artist for my 1st ever custom blown glass piece, let alone my first piece that isn't basic scientific plain/clear glass EVER ! :uhoh:

I can hardly wait to show it off here as well as amongst my circle :brow:
 

DieHard

Accessory supplier
Accessory Maker
Yeah I did. ive been busy with family stuff. I have to figure out exactly what I want, but basically a carbed adaptor for my enail. I can't break out all of my toys with all of the family around. I will have some time after 9 tonite. We will hash out(pun intended) the details and I will send payment after.
 
DieHard,

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Alrighty. I was just checkin since I hadn't heard from ya. My families been all over the place for the past couple days too. So I feel ya. Now imagine them all crawling all over your glass shop! Lol

Edit: on the plus side. My cards finally came in today. One of these will be in all packages from here on out.

JPOHBTp.jpg
 
Last edited:

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I did. I was able to hit the sale I wanted to hit to get my sons tv and a couple of games he wanted and my daughters a shit ton of clothes they wanted. All thanks to my FC fam. You guys are life-freakin-savers! I bet I saved over 200$ by being able to hit the sales. Much love all.

Now to save for that new iphone. Lol
 

sve

Well-Known Member
Wow, some really nice pieces in this thread. I have been missing out!

Do you have any stems ready to go for an enano or a solo right now? If not, is there a list of the different 'options' you offer? I have been reading the thread but want to make sure I'm not missing out on anything.
 
sve,
Top Bottom