Discontinued Indica Vaporizer

Spinuch

Well-Known Member
Ye I was reading your posts the other night . At least you had a little more time with yours before it stopped... I'm sure it will all get sorted im just worried I'm gonna combust before I get my indica or ff back
My new noir is a fumer. Michael is in china trying to work things out so we should hear back later next week.
 

queefermadness

Well-Known Member
Not heating up was a bug with the first model that was supposedly identified and fixed. Disappointing that its still lingering. Their customer service has been excellent, just hope I won't need it again.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Hey all - just wanted to share that the 14mm Indica WPA is now for sale on my Etsy Store!

Even though I have a link in my signature - here it is for any FC Lurkers who haven't signed up for the site: https://www.etsy.com/listing/211753066/indica-vaporizer-waterpipe-adapter-14mm

I've been using my WPA with a PNWT and it's working GREAT! I also have an 18mm version which is designed, but I haven't printed the final mold yet, probably printing it tonight. That version should be available by this weekend.

il_fullxfull.686037499_2zuq.jpg
 
Last edited by a moderator:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Ahhh amazing @Ratchett ! Been waiting a long time for this!

I was going go with the 18mm, but since you have 14 up first and I already have an 18-14mm reducer, this would probably work just the same then right? Or would it be a little tricky sealing with the reducer and am I better off waiting for the 18mm?

If i do get a 14mm SonG then maybe I can get a PNP knock off hydrotube from sunshine store too, been wanting to try a hydrotube for a while now and my own 18mm bong perc salvage into one didn't work out...

I also wanted to get a tree perc bubbler to compliment my inline honeycomb though, but I dono if I really need three different percs (or maybe having three is essential!)

Does the indica work ok upside down in the bubblers btw? Not too much oil dripping into the mouthpiece and SonG? I remember the T-Vape silicone mouthpiece getting a little gunky when used upside down into a bubbler at least...

Anyway fantastic work, you're doing a great service here! Oh and any idea when your firefly SonGs will be ready? Would it make more sense for me to order them both together?
 
Shit Snacks,
  • Like
Reactions: vapeppau

Delta3DStudios

Well-Known Member
Accessory Maker
Lol, the silicone seals very nicely with a 14mm female fitting, you should have no problem with a 18-14mm reducer.

I have only tried the indica on my D020 twice, so I can't really comment on any oil drips - if anything I bet they'd be caught in the mouthpiece cavity and not clog the MP hole.

I should note, I have not modified my mouthpiece whatsoever - I am using the standard hole-size. I have not done the @Vape Dr. modification to bore out the MP. Obviously I get a bit of resistance from the small vapor path, but it's not enough to annoy me

To avoid derailing the thread, I'll send you a PM about the firefly.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Hey @Ratchett did the indica manage to milk out your bubbler? Great work man

Thganks! It's hard to tell with the PNWT since I'm craning my neck over the piece while using it - but I think I'll try the D020 with my 18mm Indica SonG and get some video of the milking action. :science:

I will say if you skip the first 3 settings and go straight to purple or red, you'll see greater vapor density which should be enough to milk a small bubbler.

When using it dry, I normally stop at purple, red is usually a bit too hot for me. But it's much more enjoyable through water.
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
I should note, I have not modified my mouthpiece whatsoever - I am using the standard hole-size. I have not done the @Vape Dr. modification to bore out the MP. Obviously I get a bit of resistance from the small vapor path, but it's not enough to annoy me

If I were you I'd make the hole size in your adapter double the standard hole size. I don't see any reason not to and it would definitely increase your market, since those who like the larger hole will probably not want to revert to a smaller size. Besides, people like to milk their water tools and thicker clouds are the reason some of us have enlarged the mouthpiece hole.
 

Delta3DStudios

Well-Known Member
Accessory Maker
If I were you I'd make the hole size in your adapter double the standard hole size. I don't see any reason not to and it would definitely increase your market, since those who like the larger hole will probably not want to revert to a smaller size. Besides, people like to milk their water tools and thicker clouds are the reason some of us have enlarged the mouthpiece hole.

I apologize for the confusion. I did not modify the hole size on my personal indica mouthpiece.

The Vapor path of my Silicone WPA is comparatively HUGE (8mm diameter). In fact, it's large enough and the Silicone is flexible enough, you can slide it OVER another 14mm male fitting - which allows for my 14mm WPA to work on both male and female pieces. (Though I don't really advertise that because I don't know what the long term effects of this would be on the piece)
 

pakalolo

Toolbag v1.1 (candidate)
Staff member
I apologize for the confusion. I did not modify the hole size on my personal indica mouthpiece.

The Vapor path of my Silicone WPA is comparatively HUGE (8mm diameter). In fact, it's large enough and the Silicone is flexible enough, you can slide it OVER another 14mm male fitting - which allows for my 14mm WPA to work on both male and female pieces. (Though I don't really advertise that because I don't know what the long term effects of this would be on the piece)

That makes much more sense. :tup: You shouldn't apologize. On reviewing the exchange, I see now that I misread your meaning, which I probably would not have done had I been properly caffeinated and cannabinated.
 

upriver

combustion-free
My sticky button issue is getting worse. It will now, despite careful pressing in the inoffensive direction (that is, as vertically as possible) still hook under the lip of it's hole, and remain depressed. The button has to be jiggled a bit to get it to pop back up. Used to be just mildly annoying but now it is causing the unit to power down (via the long "press") at inopportune moments. Anyone else dealing with this? I really want to love this thing, but if this gets any worse it will be entering show-stopper territory.
 
upriver,

Delta3DStudios

Well-Known Member
Accessory Maker
My Noir is showing those symptoms of a sticky button. Haven't had it turn off once during use, but indeed my button is more sticky than the previous Indica I used
 
Delta3DStudios,
  • Like
Reactions: upriver

upriver

combustion-free
I'll patiently work with it and report any improvement or worsening. Thanks for responding to both of you.
 
upriver,

sroz

New Member
It appears that my Indica no longer heats up as well.
It turns on, can cycle through colors, and indicates that it is charging when plugged in.
I have the original stainless steel version.
 
sroz,

Dynalowrider

Well-Known Member
I'm contemplating drilling out the mouthpiece. Anyone have pros and cons of doing so? I'd like to get an extra MP to drill out if possible. I don't want to ruin a good thing.
I love this vape. I was down at the local watering hole with it. People thought I just had a fancy e-cigarette. I smoke cigars, so I told them it was an e-cigar.:rofl: Shh, don't tell them.
 
Dynalowrider,

upriver

combustion-free
I drilled mine out, I enjoy the change. Only con I can think of is the possibility of breathing metal fillings, so I gave the piece a very very very thorough scrub and blew it out with compressed air. Maybe excessive but health is the reason I vape to begin with.
 
upriver,
  • Like
Reactions: KeroZen

GoGlass

Well-Known Member
Hello Guys, do you know a simple way to remove the lid of the Indica, even it's permanently ?

Thanks !
 
GoGlass,

VANVAS

Well-Known Member
Hi, my indica works very well but im just can testing it with lower temps cause i have some problem with the battery and i just can get 4-5 sessions even at lower temps. No more than green. As well im Having problems with the plastic on the closures and with the closure from plastic oven-door , i don't know why cause from first time i know the way to open and close the door but i think the problem is the hot it takes and if you open the door just finishing a session one time and one more time may be with the time you will have problems and i use the indica sometimes load by load .
Mike is taking care with me same with others users , we can make sure we are under control ! Thanks Mike !
Im waiting for my replacement from Mike but i don't know when he will send me cause he is in China so...he wrote me he will send while he is China, i hope will soon!!
Edit: i have to say: AMAZING FLAVOR AND TASTE DURING FIRST SESSION AT CYAN, solo doesn't give you this flavor , just give you 2-3 minutes pure flavor and i love solo too!
 
VANVAS,
  • Like
Reactions: vaporlee

vaporlee

Well-Known Member
I have many experience with various manufacturers, but, I have never seen any, could overcome customer service for Indica and far greater, Mr Mike, I really feel respected and I appreciate that there are not only companies talk bunch of bullshit until payment than noreply at all for CS, but I really hope, that there will be more companies like Indica in future.

Long Live The Indica!
 

DasBlunt

Active Member
How do some of you figure out how to make every single new device look like a improvised crack pipe or another magic bong?

This is the portable thread, maybe we need a "innovative adaptations towards dream bong" sub forum?
Version 1-10 for each portable model.

nice innovation and all.... that is hilarious too.
 
DasBlunt,
  • Like
Reactions: nigel
Top Bottom