Cheap High Quality Bubbler

D

demonscars

Well-Known Member
So I started browsing thought this thread and really wanted to pick something new up. I wound up ordering this:

http://m.dhgate.com/product/2014-new-two-function-8-quot-height-glass/196919979.html#s1-3-1

It reminded me of a similar piece from Kathy that I've seen a few people on here have, and Kathy also had this piece but since I've dealt with them before seemed like the better choice.

I haven't been able to find this exact piece in the thread anywhere and was wondering what the appropriate water level is for something like this? Anyone have this piece?
 
demonscars,
DieHard

DieHard

Accessory supplier
Accessory Maker
demonscars said:
So I started browsing thought this thread and really wanted to pick something new up. I wound up ordering this:

http://m.dhgate.com/product/2014-new-two-function-8-quot-height-glass/196919979.html#s1-3-1

It reminded me of a similar piece from Kathy that I've seen a few people on here have, and Kathy also had this piece but since I've dealt with them before seemed like the better choice.

I haven't been able to find this exact piece in the thread anywhere and was wondering what the appropriate water level is for something like this? Anyone have this piece?
Click to expand...
This one has made the rounds. I think it is about 6"-8" tall. I have seen it in clear and with black accents/perc.
 
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
demonscars said:
So I started browsing thought this thread and really wanted to pick something new up. I wound up ordering this:

http://m.dhgate.com/product/2014-new-two-function-8-quot-height-glass/196919979.html#s1-3-1

It reminded me of a similar piece from Kathy that I've seen a few people on here have, and Kathy also had this piece but since I've dealt with them before seemed like the better choice.

I haven't been able to find this exact piece in the thread anywhere and was wondering what the appropriate water level is for something like this? Anyone have this piece?
Click to expand...
I have it, It's really nice. The original design is by B.Wilson. you should put the water level just below where the donuts start. That way you'll get the water to splash around the donuts. If it gets in your mouth just pour a little out. I wish I'd have gotten it with the black accents
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
I had it, sold it to a friend - unfortunately it was too small to work with any of my vapes comfortably (my nano was so close to my face I couldn't even get my lips on the mouthpiece!

Should be great for dabs, but I never tried
 
Delta3DStudios,
  • Like
Reactions: BoogerMan
V

vaplen

Well-Known Member
@ataxian you were right, the DO22 was awesome had it for a month or 2 and then today after groggily waking up from a sugar binge went over to desk and knocked it to the floor barely realizing what I did. So good morning everyone :\

Are there any GB-187's left? EDIT: Already found it :p hope its not too similarto my D020

Holy crap am I impulsive. Already purchased the 187. Hope its as good as my expectations. This is my knock off dream piece haha
 
Last edited:
nihil

nihil

Member, Known Well
vaplen said:
...hope its not too similarto my D020
Click to expand...

Here you go, newer GB-187 on the Left and a D020 on the Right:
DsSswyo.jpg


The 187 is wet and dirty, just did a quick rinse for comparison between it and the D020. For the Enano I prefer the volume in the 187.
 
cybrguy

cybrguy

Putin is a War Criminal
@Nugg I enjoyed the D022 too, though I found myself playing around the water levels more than using it. I have 2x of the D022- the first one came with abrasions so sunshine sent a second one. Both pieces are already broken; one on the joint, the other at the down stem by the joint, because the glass near that area was weak it seemed, or at least the joints couldn't withstand being taken apart and put back together for cleaning very many times. Maybe the quality has changed in the past few months though, idk.
Click to expand...

I have been lucky, I guess. My D022 has survived a couple of tumbles on to carpeting from a coffee table about 16"/18" off the carpeted floor. I hope I am not jinxing it by typing it...

If I DID break it I would get another if I could. I like it a lot.
 
Nugg

Nugg

Well-Known Member
Does anyone have a photo of the GB-186 and GB-187 side by side?

I'm thinking of adding a 186 to my collection. I feel like it might be a bit more ergonomic for use with a log vape. Any thoughts?

If my D022 broke I'd definitely get another! I might even order a second one now as a back up lol.
 
EverythingsHazy

EverythingsHazy

Well-Known Member
Nugg said:
Does anyone have a photo of the GB-186 and GB-187 side by side?

I'm thinking of adding a 186 to my collection. I feel like it might be a bit more ergonomic for use with a log vape. Any thoughts?

If my D022 broke I'd definitely get another! I might even order a second one now as a back up lol.
Click to expand...
The placement of the E-Nano on the gb-186 is nice because it allows you to look down into the can to see the vapor density. It also keeps it completely out of your face.

DieHard said:
Here ya go.
GVJGapJ.jpg
Click to expand...
Your gb-186 has a roor logo? Is the mouthpiece perfectly center, or is it leaning a little bit to one side?
 
DieHard

DieHard

Accessory supplier
Accessory Maker
EverythingsHazy said:
The placement of the E-Nano on the gb-186 is nice because it allows you to look down into the can to see the vapor density. It also keeps it completely out of your face.


Your gb-186 has a roor logo? Is the mouthpiece perfectly center, or is it leaning a little bit to one side?
Click to expand...
It has 2 ROOR logos. One on the MP. And one on the Can. The MP has a 1-2 degree lean to the right. Also the top perc is slightly crooked. All that said... I love that thing.
 
Buildozer

Buildozer

Baked & Fried
Has there been a picture showing the new and old 187's side by side? Is the only difference supposed to be the height of the can?

I have one coming by next weekend hopefully :rockon: It's supposed to have no label too :cool:
 
Frederick McGuire

Frederick McGuire

Aggressively Loungey
Buildozer said:
Has there been a picture showing the new and old 187's side by side? Is the only difference supposed to be the height of the can?

I have one coming by next weekend hopefully :rockon: It's supposed to have no label too :cool:
Click to expand...
Dude...
Last page...
nihil said:
GB-187 batch comparison:

Left - GB-187 circa October 2014 - - - - - Right - GB-187 circa April 2014
QDvTy6z.jpg


Same as above
ISAd5jd.jpg


The newer one (taller) seems like a slight redesign regarding the base and mouthpiece. The base is wider and taller while the mouthpiece has less of a flare at the end. The perc on the newer model is also cleaner with regards to the "cuts" in the glass.

For the price, this is my favorite piece available on DHGate.
Click to expand...
 
Nugg

Nugg

Well-Known Member
@EverythingsHazy I'm preparing for when I get my HI. I think I will need good view of the stem and can while I'm learning to master it. I'll also use it with the solo when I'm in the mood for some untethered action
 
Nugg,
ConstanlyConcentrated

ConstanlyConcentrated

Member
Hey guys been following the thread for a while now and finally decided to sign up. I currently debating on a purchase. I know the GB-186 and GB-187 are both great bongs from what I have read. But if you were going to just purchase one which would it be? I am will be using it for mostly dabbing but I am thinking about purchasing a log style vape in the near future to use with it as well. Let me know what you guys think and thanks too everyone for all the info in this thread.
 
ConstanlyConcentrated,
You must log in or register to reply here.
Top Bottom