• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

snamuh

ghost
Yes I put the screen in the same spot I'm pretty sure I measure it by the long side of the epik and it's almost touching the heating source and I can't seem to get much vapor I get more from my all glass honeycomb. Could the screen be dried out from being lit on fire?

I don't think that that screen would be an issue.. aside from its distance. Maybe you are inhaling faster with the cleared screen?
 

Delta3DStudios

Well-Known Member
Accessory Maker
Yes I put the screen in the same spot I'm pretty sure I measure it by the long side of the epik and it's almost touching the heating source and I can't seem to get much vapor I get more from my all glass honeycomb. Could the screen be dried out from being lit on fire?

Go back and re-measure with the epik and the notch - usually my 0.1G of material is CLOSE or touching the heat when I start my session.

Screens don't "dry out" - they're all metal....... The only thing that might happen is you would get a bit of a carbon taste from torching the screens. As it's been suggested before, if you do torch your screens (which I don't), you should dip your screens in ISO to clean off any burnt residue. But I believe this would affect the taste, not performance of the vape.
 
Delta3DStudios,

Shredly

Well-Known Member
I have cleaned with iso and burned screens that are like 7 years old. Haha.
Haha I was really worried for some reason that iso was bad for the screen. I've also dropped my nano a few times but when it heats up it feels pretty hot so I don't think it could be broken right?
 
Shredly,
I just received my E-Nano today. I unboxed everything and was ready to get vaping. I plugged the power cord into the wall socket and then into the E-Nano. I rolled the on/off/temp dial from zero slowly up to the highest temp. While I was rolling the dial, there was a click around 1 and then a spark shot out the side of the box with the dial on it. I'm assuming there is an AC to DC transformer in this box and that a capacitor blew, but I figured I'd post here to see if I can get some second opinions/fixes. It doesn't heat up, and the light at the bottom doesn't come on.

Opinions, jokes, and help are welcome! Thanks in advance.
 
SuperFastJellyFish,

Caelar900

Well-Known Member
That char looks pretty accurate, I typically run my Nano around 6.5 constantly these days (I was cloud chasing at 7, but didn't enjoy how I felt afterwards). Though I didn't realize 5.5 was hot enough to vape - I think I might try some sessions there and then jump up to 6.5 to finish
I definitely agree, usually go a little above 6.5 but when I get my nano back I think Im going to start right below 6 and then bring it up!
 
Caelar900,

TeeJay1952

Well-Known Member
Superfastjellyfish get immediate RMA. Don't waste time.It will take time to send back and return to you.
I am really bummed by your story and caelar900. It will get fixed and a month from now you will have forgotten these problems. I know because E-nano is a remarkable devise. It sucks you have to go though it but it is what it is.
 

Caelar900

Well-Known Member
Superfastjellyfish get immediate RMA. Don't waste time.It will take time to send back and return to you.
I am really bummed by your story and caelar900. It will get fixed and a month from now you will have forgotten these problems. I know because E-nano is a remarkable devise. It sucks you have to go though it but it is what it is.
Agreed, I will be sending her out tomorrow! I already miss my baby ;( What I didn't expect though is that I just miss my beautiful bit of koa on my windowsill!
 
Caelar900,
  • Like
Reactions: Gray Area

Shredly

Well-Known Member
After messing with my nano some more I just can't get the clouds from it like I use too. I only ever use dry stem, and vapor only comes out for the first hit no matter how close or how far it is from the heater. I've literally tried everything, and the nano does get really warm but still just doesn't produce vapor almost feels like sucking air a little. Should I try getting it repaired?
 
Shredly,

Caelar900

Well-Known Member
I've literally tried everything, and the nano does get really warm but still just doesn't produce vapor almost
What temp are you trying it at? If its still like that at 8 plus and not combusting you might have a problem. Have you tried some different strains with it, I find depending on the strain I get very different vapor production.
 

Shredly

Well-Known Member
What temp are you trying it at? If its still like that at 8 plus and not combusting you might have a problem. Have you tried some different strains with it, I find depending on the strain I get very different vapor production.
Yes 3 differnt strains from when this started. I keep it at 6.5 then to 7 and past 8 it'll just combust still not getting any vapor. Only the first hit or 2 have a little vapor nothing compared to the huge hits I would get a couple days ago
 
Shredly,

nihil

Member, Known Well
Yes 3 differnt strains from when this started. I keep it at 6.5 then to 7 and past 8 it'll just combust still not getting any vapor. Only the first hit or 2 have a little vapor nothing compared to the huge hits I would get a couple days ago

To clarify, you can get combustion at 8 and above? That sounds like a working device to me.

Are you getting the effects of the material even with the lack of vapor (i.e. are you getting high)? I have a few strains that produce very little vapor at any setting, but they still get me high. If I dry them out, I will get more vapor, but the effect seems to be the same regardless of the vapor production.
 

Delta3DStudios

Well-Known Member
Accessory Maker
After messing with my nano some more I just can't get the clouds from it like I use too. I only ever use dry stem, and vapor only comes out for the first hit no matter how close or how far it is from the heater. I've literally tried everything, and the nano does get really warm but still just doesn't produce vapor almost feels like sucking air a little. Should I try getting it repaired?

Have you tried a different screen or a different GonG stem?
 
Delta3DStudios,

Shredly

Well-Known Member
To clarify, you can get combustion at 8 and above? That sounds like a working device to me.

Are you getting the effects of the material even with the lack of vapor (i.e. are you getting high)? I have a few strains that produce very little vapor at any setting, but they still get me high. If I dry them out, I will get more vapor, but the effect seems to be the same regardless of the vapor production.
It literally happened over night though and when it gets to hot the first hit will combust then the rest of the hits very minimal in vapor. And no not feeling the effects

Have you tried a different screen or a different GonG stem?
New screens coming Friday and I have a honey comb stem that I've been try to use it's hitting decent right now which is making me thing the screen might just be bad in the other stem?
 
Last edited by a moderator:
Shredly,

Delta3DStudios

Well-Known Member
Accessory Maker
New screens coming Friday and I have a honey comb stem that I've been try to use it's hitting decent right now which is making me thing the screen might just be bad in the other stem?

Really don't see how that's possible. I've reused my screens plenty of times with no problem. I think something else is going on. Can you show us a picture of how you have your basket installed?
 
Delta3DStudios,
  • Like
Reactions: snamuh

Shredly

Well-Known Member
Really don't see how that's possible. I've reused my screens plenty of times with no problem. I think something else is going on. Can you show us a picture of how you have your basket installed?
Not by my computer right now on my phone I'll have to upload one tomorrow!
 
Shredly,

ChippyMalone

Be here now.
Accessory Maker
My walnut E-Nano arrived this afternoon. It's just beautiful. I would have waited for a custom exotic, but I ordered this in a nearly emergency situation with greatly increased pain, so I was willing to take what I could get. Well, I couldn't be happier with it. It has a very beautiful variation in the color and grain of the walnut that gives it a lot of depth and a mesmerizing shimmer that plays with the light. I almost suspect that it could have been made with the "scrap" left from a batch of fiddle back exotics, as it does have some of that horizontal banding and shimmery grain in some areas. I cannot wait to see it illuminated by the rising sun tomorrow morning. I'll take photos of my morning vaping nook then.

I've had a Firefly for the past seven months, and although it is an excellent portable, I always knew there had to a way to get the very best flavor and effect without working so darn hard to get there. The very first taste of vapor from the E-Nano was three or four times thicker than anything the Firefly can put out. I was just blown away.

I tried high CBD flowers first and was surprised at how much stronger the pain relief and general relaxation was. Although these are high quality flowers, they are not particularly pungent, but they had a noticeably stronger and distinct taste than I have experienced before.

Then, before dinner I switched to a nice skunk/lemon haze and was completely blown away by the intense perfumey flavor! It tasted like I ate one of my wife's fancy scented candles, except it was good. Then I switched to a blue Hawaiian, but at that point I was simply much more medicated than I intended despite using less than what would fill the Firefly once.

Now, a few hours later I've got some black tar hash sandwiched between some outdoor flowers and I'm marveling at how vaping with this in bed is so easy. To be able to operate this device while laying completely flat on my back is really comfortable, especially when it hurts to roll over.

I want to take photos and talk about it more tomorrow. Thank you to everyone, especially Andy, for making this a reality in my life. It is going to make my life better.
 

Maine420

GROOVY GRANNY
Just wanted to thank Andy, @ACE OF VAPE , for the phone call last night! Nothing like the best customer service ever! and such a small world it is! Andy in Cali and I am thousands of miles away on the right coast (Maine) have Maine in common! lol! The older I get, the smaller this world gets!

Can't wait to get the best Vape ever, my E-Nano home! Thanks again Andy!
 

Melting Pot

Sick & Twisted
Same happened with mine. It finally updated the day of delivery. Dont stress you will have it soon ChippyMalone. :D
My expected delivery was yesterday USPS what a joke. No update since the 10th im hoping for today.my refresh button is getting worn out. Lol

I keep hoping to see out for delivery.:p

No nano today maybe tomorrow:mad:
 
Last edited:

wax

Active Member
I'm trying to buy an enano and I get to complete order and it says it's taking me to paypal but never opens the app or a new page? How do I buy something if I can't pay for it .
 
wax,

Mrmrmrmr

Well-Known Member
My walnut E-Nano arrived this afternoon. It's just beautiful. I would have waited for a custom exotic, but I ordered this in a nearly emergency situation with greatly increased pain, so I was willing to take what I could get. Well, I couldn't be happier with it. It has a very beautiful variation in the color and grain of the walnut that gives it a lot of depth and a mesmerizing shimmer that plays with the light. I almost suspect that it could have been made with the "scrap" left from a batch of fiddle back exotics, as it does have some of that horizontal banding and shimmery grain in some areas. I cannot wait to see it illuminated by the rising sun tomorrow morning. I'll take photos of my morning vaping nook then.

I've had a Firefly for the past seven months, and although it is an excellent portable, I always knew there had to a way to get the very best flavor and effect without working so darn hard to get there. The very first taste of vapor from the E-Nano was three or four times thicker than anything the Firefly can put out. I was just blown away.

I tried high CBD flowers first and was surprised at how much stronger the pain relief and general relaxation was. Although these are high quality flowers, they are not particularly pungent, but they had a noticeably stronger and distinct taste than I have experienced before.

Then, before dinner I switched to a nice skunk/lemon haze and was completely blown away by the intense perfumey flavor! It tasted like I ate one of my wife's fancy scented candles, except it was good. Then I switched to a blue Hawaiian, but at that point I was simply much more medicated than I intended despite using less than what would fill the Firefly once.

Now, a few hours later I've got some black tar hash sandwiched between some outdoor flowers and I'm marveling at how vaping with this in bed is so easy. To be able to operate this device while laying completely flat on my back is really comfortable, especially when it hurts to roll over.

I want to take photos and talk about it more tomorrow. Thank you to everyone, especially Andy, for making this a reality in my life. It is going to make my life better.
Thank you so much for sharing your story !! It warms my heart to hear such things :)
 

Reflections

Well-Known Member
@wax did you make an account on epicvape site? perhaps that will help. Sometimes Andy's webpage is down for construction... keep trying or you can message Ace Of Vapes here on FC and ask him.

Congrats @ChippyMalone glad you are enjoying your e-nano and welcome to the nano family!

Sorry to hear you havent received your nano yet @Melting Pot..hope you get it today or tomorrow!!

Heres a short vid I did of me enjoying my nano with eds stem

 

snamuh

ghost
I ordered!!! Although I had nothing in my paypal account... I don't know if it takes money from my account automatically but I added some manually anyway... it says it takes 3-5 days to transfer :(
 
Top Bottom