The Magic-Flight Box

Gunky

Gunky

Well-Known Member
spentskeeper said:
I've been playing with the PA for a couple of days now and I must say the PAMFLB is a quality home vape. I didn't love the whole battery thing but with the PA it's a great vape... wonderful taste. I've owned: Volcano, dabuddha, extreme q, some others but I'm keeping PAMFLB and PD/TOOTY. I don't know if one gets you higher then the other but I'll try real hard to figure it out, kind of hard to be scientifical about that though.
Click to expand...

Yeah, that's what I thought. Once you get to ditch the batteries and all their limitations the LB becomes a whole different thing. LB vapor is a little rougher-edged, IMO, possibly because there is often a tiny amount of well-done dust at trench bottom which scorches. I notice I cough more with LB. If I have a cold a log vape is better, and I suspect logs may be better for asthma patients. However you could mitigate the issue by turning heat down on PA... Some will say just poor technique on my part - mebbe so. On the other hand the LB/PA delivers marvelously elevated planes of thought and you can zap those higher temp cannabinoids... I need both.
 
Gunky,
sundaddy

sundaddy

Well-Known Member
4thfloorghost said:
I quit smoking cigarettes a year and a half ago. I made myself chose, either I smoke cigarettes or marijuana. The choice was obvious, and I do not miss cigs, not even a little, in fact just the smell of them make me nauseous.
Now I plan to leave smoking behind altogether, my MFLB will be arriving in just another day and a half! I'll write my review once I get it. The reviews I've read here have me anticipating. Fuck combustion!
Click to expand...

I did the same thing 10 years ago. Best decision I made. Not to mention I was spending $2400 a year on cigs. Just realize you can NEVER have one cig again. Until I came to that realiation, I kept falling off the wagon.
 
sundaddy,
DeepFried

DeepFried

A Legend in my Own Mind
Canadian Bud said:
what can i do though to fix the vapor coming out of the box
Click to expand...

Just use tape and tape it up where the vapor is leaking out - easy fix. Even better a little glue around the lid and into all the holes should fix your problem for good.
 
DeepFried,
rtwoite

rtwoite

Well-Known Member
Maybe you could post some pictures of your device so we could see if there is anything obvious. even better, a video.
 
rtwoite,
4

4thfloorghost

Member
Just used my MFLB for the very first time. This was also my first time vaporizing. I am blown away, all (if not more) of the bliss of smoking, without any of the nastiness that comes from combustion. This has been a truly memorable first flight for me. Great product magic flight.
 
4thfloorghost,
aesthyrian

aesthyrian

Blaaaaah
Canadian Bud said:
can someone answer my question please. why does vapor keep coming out of the back of the box when im hitting it?
Click to expand...
That is an air intake hole, if you aren't inhaling then vapor can escape out of the back, however if you are inhaling and vapor is somehow escaping then clearly you should send it in and use that lifetime warranty. Sounds like you are either inhaling waaaaay too slow or the box is faulty.
 
aesthyrian,
F

Five

Member
Me and a friend got this a couple months ago. Been both using it almost daily since. I'm really impressed how well it's held up through all the use. And it'll only be getting used more in the future :D
 
Five,
A

Amped_MFLB

Member
Hey guys! I got mine two or three weeks ago, and have been using it daily ever since. First time my bud was a bit black or just very dark brown, but i doubt i combusted because the top was still clear, and my stem was still clear. Anyways... i LOVE this thing. As you can tell by my name haha, i swear by this little vaporizer, and i promote it everywhere. I love it so much, so i feel the need to do this so others are reassured that buying the MFLB is a great investment and its definitely worth it.

I noticed today though that my screen has 3-4 little tiny specks of black on it, is this because herb got combusted in that area for a second? I saw a picture of somebody who has been using the vape for years and his screen was like fully black haha, but i thought black means combustion.
 
Amped_MFLB,
the ob

the ob

all good in the hood.
JDSupreme said:
Noonan said:
It seems like I have to inhale for more then 10 seconds.. Even with the PA.

I'm starting to wonder if my MFLB runs a little cool.
Click to expand...

Try this. I posted it a few pages back in the MF thread ...

Yesterday I noticed that on full power the LB light wasn't as bright as it used to be. It def worked, but was slacking off. So then I noticed that the housing around the activate button had ever so slighly come loose. Like the + end, there are 2 tiny raised dots on the disks surrounding the button. I turned it about a half a turn or so and tightened up. BOOM!!! I think the light is brighter than originally and it hits harder than ever!!!
The connection must have somewhat loosened up and a quick tighten (and now I know to keep and eye on it) was the trick. Seriously, it hits like a freight train again
Click to expand...

how did you do this exactly? I see the two dots, but am not sure what you used/ or how you tightened it exactly.

also, does anyone have advise as to where I should start with the heat dial?
 
the ob,
JDSupreme

JDSupreme

Head of Pot
the ob said:
JDSupreme said:
Noonan said:
It seems like I have to inhale for more then 10 seconds.. Even with the PA.

I'm starting to wonder if my MFLB runs a little cool.
Click to expand...

Try this. I posted it a few pages back in the MF thread ...

Yesterday I noticed that on full power the LB light wasn't as bright as it used to be. It def worked, but was slacking off. So then I noticed that the housing around the activate button had ever so slighly come loose. Like the + end, there are 2 tiny raised dots on the disks surrounding the button. I turned it about a half a turn or so and tightened up. BOOM!!! I think the light is brighter than originally and it hits harder than ever!!!
The connection must have somewhat loosened up and a quick tighten (and now I know to keep and eye on it) was the trick. Seriously, it hits like a freight train again
Click to expand...

how did you do this exactly? I see the two dots, but am not sure what you used/ or how you tightened it exactly.

also, does anyone have advise as to where I should start with the heat dial?
Click to expand...

a finger nail. if it doesn't move easily its prob tight.

I marked my dial so on full power the dot is about to go inside the hole. I start out with the dot back up in the middle of the slot. Once I vape the trench a bit I turn it down to suit my taste. I'd call it 90% then 80 then 70. you can get more, better tasting hits this way IMO
 
JDSupreme,
the ob

the ob

all good in the hood.
The PA completely changes this device. It makes it much more powerful. First time using it and I am a changed man.

I highly recommend picking up a PA if you have the means.

I love the small black power button and the fact that you can leave it plugged in.
 
the ob,
momofthegoons

momofthegoons

vapor accessory addict
Well, guess it's time for me to pull the trigger on the PA. I've been reading all of your raves on this and can't stand it anymore!! :lol: My order is going in today.
 
momofthegoons,
JDSupreme

JDSupreme

Head of Pot
momofthegoons said:
Well, guess it's time for me to pull the trigger on the PA. I've been reading all of your raves on this and can't stand it anymore!! :lol: My order is going in today.
Click to expand...

Its about motha fuckin time Mom!!! :)
 
JDSupreme,
saucybx

saucybx

Vapetress
JDSupreme said:
momofthegoons said:
Well, guess it's time for me to pull the trigger on the PA. I've been reading all of your raves on this and can't stand it anymore!! :lol: My order is going in today.
Click to expand...

Its about motha fuckin time Mom!!! :)
Click to expand...


Hear, hear!
 
saucybx,
the ob

the ob

all good in the hood.
momofthegoons said:
Well, guess it's time for me to pull the trigger on the PA. I've been reading all of your raves on this and can't stand it anymore!! :lol: My order is going in today.
Click to expand...

why am I not surprised? :brow:
 
the ob,
collegerower

collegerower

Well-Known Member
momofthegoons said:
Well, guess it's time for me to pull the trigger on the PA. I've been reading all of your raves on this and can't stand it anymore!! :lol: My order is going in today.
Click to expand...


I am thinking the same thing mom.Its about time I order mine also...
 
collegerower,
the ob

the ob

all good in the hood.
It was interesting. I had cranked it up to the highest temp and was not getting vapor and the light was super low. I thought maybe I had an issue with mine. Then I turned the dial to the left and the thing just took off. I assumed moving it to the right was hotter and the left was cooler. Felt dumb for second.

The PA makes this a device you want to use at home as opposed to one you just want to use while you travel. I am even thinking about taking the PA with me on the road. It is also nice because I have a tendency to not leave my zaps plugged in all the time (it worries me) and this gives me instant gratification.
 
the ob,
JDSupreme

JDSupreme

Head of Pot
the ob said:
It was interesting. I had cranked it up to the highest temp and was not getting vapor and the light was super low. I thought maybe I had an issue with mine. Then I turned the dial to the left and the thing just took off. I assumed moving it to the right was hotter and the left was cooler. Felt dumb for second.

The PA makes this a device you want to use at home as opposed to one you just want to use while you travel. I am even thinking about taking the PA with me on the road. It is also nice because I have a tendency to not leave my zaps plugged in all the time (it worries me) and this gives me instant gratification.
Click to expand...

I did the exact same thing when I first used it!

the car adapter for the PA is the shit as well. The PAMFLB is like "My Buddy" wherever I go, he goes :p
 
JDSupreme,
momofthegoons

momofthegoons

vapor accessory addict
:lol: It's a motherfucking done deal. I can't wait. I use my LB daily and a few of my batteries are beginning to crap out. Now I'll be doing the mail box dance for the next few while I'm waiting for it to arrive.

why am I not surprised?
Click to expand...

ob, just what are you suggesting!? :lol:
 
momofthegoons,
S

spentskeeper

Well-Known Member
JDSupreme said:
the ob said:
JDSupreme said:
Try this. I posted it a few pages back in the MF thread ...

Yesterday I noticed that on full power the LB light wasn't as bright as it used to be. It def worked, but was slacking off. So then I noticed that the housing around the activate button had ever so slighly come loose. Like the + end, there are 2 tiny raised dots on the disks surrounding the button. I turned it about a half a turn or so and tightened up. BOOM!!! I think the light is brighter than originally and it hits harder than ever!!!
The connection must have somewhat loosened up and a quick tighten (and now I know to keep and eye on it) was the trick. Seriously, it hits like a freight train again
Click to expand...

how did you do this exactly? I see the two dots, but am not sure what you used/ or how you tightened it exactly.

also, does anyone have advise as to where I should start with the heat dial?
Click to expand...

a finger nail. if it doesn't move easily its prob tight.

I marked my dial so on full power the dot is about to go inside the hole. I start out with the dot back up in the middle of the slot. Once I vape the trench a bit I turn it down to suit my taste. I'd call it 90% then 80 then 70. you can get more, better tasting hits this way IMO
Click to expand...
what did you mark your dial with?
 
spentskeeper,
Lo

Lo

Combustion free since '09
Kudos to MF for wonderful service yet again. Great service!!

My beta PA had an issue and I sent it in on Monday and received my replacement yesterday. I'm back in biz!!

A nice handwritten note thanking me for my feedback and a car adapter included as a thank you. These folks know how to do customer service :D I love the handwritten notes especially!!!
 
Lo,
You must log in or register to reply here.
Top Bottom