• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Divine Tribe atty's

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
I am pretty sure it will unless that battery has a higher ohm protection circuit.
 
divinetribe,

kernal6500

Well-Known Member
wowi am in love with divinetribes rda atomizer. Just what i am looking for, big vapor and a clean hit. yum. this think rocks with a mod

and thank you for the FREE globe atomizer looks like it has a splash guard, good thinking.
 
Last edited:

Jared

Cannabis Enthusiast
So if I just have an incredibly cheap non adjustable ecig battery can I slap one of these atomizers on it and be good to go or would I need a different battery?
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
So if I just have an incredibly cheap non adjustable ecig battery can I slap one of these atomizers on it and be good to go or would I need a different battery?
whats up with the v2 donut atty. has alibaba released it yet?
hey y'all still waiting on word for the all ceramic version 2

You can't use the donut on your cheap battery but you can use a dual ceramic Rod I carry those with in the glass globe or the micro skillet
on www.ineedhemp.com
thanks
Matt
 

PPN

Volute of Vapor
Hi, any feedback here about the Robox mod sold by DT?

I'm thinking about one since my X6 VVbattery is dead I have nothing to drive my donut atty (and it's my favourite on the go concntrate device, stealthier than persei+sr74).

How big is the Robox? if I use it with 1 x 18350 is it shorter? what is the max voltage? do you think it's able to drive the TV evo SV loose leaf cartridge?

I thought to use my donut with my persei but in fact there is 2 good reasons to don't do it, first it needs an adaptater to fit the persei...not really sexy..., and if it worked really nice with the Core it doesn't worked enough hot at 3.7v (1 x 18650 3.7v)...so I need a sub-ohm mod to drive it...any help is welcome!
 

Armerad

Dabbin'
Hi, any feedback here about the Robox mod sold by DT?

I'm thinking about one since my X6 VVbattery is dead I have nothing to drive my donut atty (and it's my favourite on the go concntrate device, stealthier than persei+sr74).

How big is the Robox? if I use it with 1 x 18350 is it shorter? what is the max voltage? do you think it's able to drive the TV evo SV loose leaf cartridge?

I thought to use my donut with my persei but in fact there is 2 good reasons to don't do it, first it needs an adaptater to fit the persei...not really sexy..., and if it worked really nice with the Core it doesn't worked enough hot at 3.7v (1 x 18650 3.7v)...so I need a sub-ohm mod to drive it...any help is welcome!
The ROBOX is 22mm wide (standard 18xxx mod thickness), and the length of an 18650 plus about 2 inches added by the regulator and bottom battery cap.

If you use an 18350, it will become a nice pocketable size, taking out the larger removable battery section.

The max voltage is 6V. I'm not familiar with the TV evo, the ROBOX tops out at 15W if that gives you any ideas.
 

adhezivek

Well-Known Member
Will my Dr Dabber battery work on the donut? I really like the idea of the donut as ive always really hated the way the standard atomizers are made. The coil and wick system with the big air hole underneath has never seemed like the most logical way to vape wax. I always though it would be much better to have a gr2 ti plate at the bottom with airholes on the sides near the top or something similar. or maybe a dual rod system where the rods are very close together and you could load a dab between the 2 rods and it would vape fast enough not to drip between the very small gap (if any gap)

any recommendations on atomizers you may have that could possibly fit my dr dabber battery?
 

mystikalghost

Well-Known Member
Was about to get an x6 and the donut but I guess I will hold off on the donut. Ill just get myself a regular atomizer.

Has anyone used these before? Can I drop in more than a little wax and use it effectively throughout the day?

Drip_tip_3.jpg
 

Armerad

Dabbin'
Was about to get an x6 and the donut but I guess I will hold off on the donut. Ill just get myself a regular atomizer.

Has anyone used these before? Can I drop in more than a little wax and use it effectively throughout the day?

Drip_tip_3.jpg


In my experience with oil pens, ceramic rods work best rather than what appears to be silica in the picture you attached.

As far as all day longevity goes, if you put a lot of oil in the chamber, it will create a reservoir of oil in the bottom which will allow you to continuing dabbing throughout the day, but the taste and potency of your oil may suffer due to the constant reheating/reclaiming going on.
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
Will my Dr Dabber battery work on the donut? I really like the idea of the donut as ive always really hated the way the standard atomizers are made. The coil and wick system with the big air hole underneath has never seemed like the most logical way to vape wax. I always though it would be much better to have a gr2 ti plate at the bottom with airholes on the sides near the top or something similar. or maybe a dual rod system where the rods are very close together and you could load a dab between the 2 rods and it would vape fast enough not to drip between the very small gap (if any gap)

any recommendations on atomizers you may have that could possibly fit my dr dabber battery?
i have a comarabel batter to the dr. dabber for $10 . invest in a ROBOX for $40 it will be a great start to sub ohm mods.
 
divinetribe,

adhezivek

Well-Known Member
i have a comarabel batter to the dr. dabber for $10 . invest in a ROBOX for $40 it will be a great start to sub ohm mods.


yes im thinking of getting your robox donut kit. but im also wondering if its worth waiting for the next gen donut. i was also thinking it would be awesome to see one in with cube of ceramic with a pop top lid (with air holes on top) down inside the chamber. like maybe the bottom of the cube heats and the side wall and top of the ceramic cube didnt. if its possible to do
 

PPN

Volute of Vapor
Hi guys, my X6 battery is dead some weeks ago and I can't use my Donut atty anymore (except with the persei+Core but the donut was my on the go device...)

So I made a test this morning, I screwed it in my TV evo body (SV, 30W at 6V), I only tested a few hits but it works, I used the pulse method and get big clouds very quickly but before to use this setup more I would like to get your advices, do you think I'm killing my donut?

I think it can support 6v but I'm afraid 30W is too much, though I like how look the donut with my TV body(I take off the plastic sleeve), it's shorter than with my X6, there is only a little gap...
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
Hi guys, my X6 battery is dead some weeks ago and I can't use my Donut atty anymore (except with the persei+Core but the donut was my on the go device...)

So I made a test this morning, I screwed it in my TV evo body (SV, 30W at 6V), I only tested a few hits but it works, I used the pulse method and get big clouds very quickly but before to use this setup more I would like to get your advices, do you think I'm killing my donut?

I think it can support 6v but I'm afraid 30W is too much, though I like how look the donut with my TV body(I take off the plastic sleeve), it's shorter than with my X6, there is only a little gap...
hey sorry about your x6 let me know if you ever get something from me again and i will get you a discount.
for the donut 4.2v and 9 w is the sweet spot. can i see a pic of your setup? email it to me and i will post it here if you dont feel like doing the whole upload thing on FC
11watts at 5v will blow up the donut!!! GO easy please
thanks
matt
ineedhemp.com
 
divinetribe,
  • Like
Reactions: PPN

PPN

Volute of Vapor
hey sorry about your x6 let me know if you ever get something from me again and i will get you a discount.
for the donut 4.2v and 9 w is the sweet spot. can i see a pic of your setup? email it to me and i will post it here if you dont feel like doing the whole upload thing on FC
11watts at 5v will blow up the donut!!! GO easy please
thanks
matt
ineedhemp.com

After some researchs I opted for 17670 batteries in my TV tube, cause a famous menber told me I'm killing my donut using it with 2x tenergys rcr123a...

So 17670's are ordered, I'll tell you if it works well with this combo!

Hi DT I already tried to order you the Robox mod and stuff but there was a shipping cost issue for my country and you refunded me...so actually I found a way to use my existing stuff but be sure I'll try again to order you ....
 

PPN

Volute of Vapor
Sorry, another back to back post!

But I found the better combo for the Donut, actually I run it with my Persei at 3.7v, heating time is really quicker than with my previous X6 battery and clouds are larges, taste is nice too!

Honnestly performances are comparables to the Hercules sr-74, just a little bit under my sr-74 running at 7.4v!
 

mystikalghost

Well-Known Member
Has anyone had their coils die relatively quickly? I got the 2 pack stainless steel ceramic rod atomizers and my first one died after 7 days. I left my VV settings the same, too. No idea what happened... :(
 

clukx

Well-Known Member
Sorry, another back to back post!

But I found the better combo for the Donut, actually I run it with my Persei at 3.7v, heating time is really quicker than with my previous X6 battery and clouds are larges, taste is nice too!

Honnestly performances are comparables to the Hercules sr-74, just a little bit under my sr-74 running at 7.4v!
oh nice can i get a video thats what i was looking to hear!!
 

GR

Well-Known Member
Not a lot to go on with the donut cart. So my basic ecig therory of double ohm for watt setting is running thin with 1ohm. How high can I bump this sucker, I have 20 watts to spare?

Would rather not push this cart until burst but looks like I will....going strong at 9.2 watts....push push push

Ok, I am pushing this cart and it is giving me what I want. For how long is my next question because I am happy for now.
 
Last edited:
Top Bottom