Discontinued The Persei Vaporizer for herbs and concentrates.

slvelocity

Well-Known Member
If you've overloaded the kiss just hit it upside down to get the oil underneath the coil flowing the right direction

Yah I thought of doing that too but I feared sucking hot oil into my mouth lol. I'll give it a try when the cartridge is near-empty :tup:
 
slvelocity,

spoutti

Well-Known Member
It has arrived! I dont know what is the fuss about signature delivery, they left it on my balcony...

XJMjlRx.jpg



I really like the look and feel of it. I cant wait to give my hercules sr71 a go. Right now, im not sure if my ceramic rod is stuck in the metal post. I have tried considerable amount of force, but im afraid I will break it instead of taking it out.

dAExsp0.jpg


What should I do? Boil it like that and reassemble? Tx for advice
 
spoutti,

Fredster951

Well-Known Member
It has arrived! I dont know what is the fuss about signature delivery, they left it on my balcony...

XJMjlRx.jpg



I really like the look and feel of it. I cant wait to give my hercules sr71 a go. Right now, im not sure if my ceramic rod is stuck in the metal post. I have tried considerable amount of force, but im afraid I will break it instead of taking it out.

dAExsp0.jpg


What should I do? Boil it like that and reassemble? Tx for advice
Try twisting force. The rod is strong. Sometimes mine gets stuck too. I just pull on them with a twisting motion. U should be fine. Last resort grip the metal end GENTLY with pliers and pull with you fingers on the heating rod end.
 
Fredster951,
  • Like
Reactions: spoutti

reece

Well-Known Member
Hi, I recently purchased a Persei from w9 Tech and it was working great. Then, it stopped working. Now it flashes 3 times when I press the button. It does this when using batteries and The Core. Also, the Core's display read "Lov" and the display also would flash on and off a bit.

I have submitted a ticket to W9 a couple days ago but have not received a response. Is there anything I can do myself?
 
reece,

spoutti

Well-Known Member
Try twisting force. The rod is strong. Sometimes mine gets stuck too. I just pull on them with a twisting motion. U should be fine. Last resort grip the metal end GENTLY with pliers and pull with you fingers on the heating rod end.
Perfect! I used an elastic grip on the metal part to twist it out. Boiling will start soon, then learning to assemble/dissassemble a few times. Squishing the ti coil between quarters, then the testing begins!
 

torggzorz

All your Vape are belong to us
Hi, I recently purchased a Persei from w9 Tech and it was working great. Then, it stopped working. Now it flashes 3 times when I press the button. It does this when using batteries and The Core. Also, the Core's display read "Lov" and the display also would flash on and off a bit.

I have submitted a ticket to W9 a couple days ago but have not received a response. Is there anything I can do myself?

I have a ticket going at the moment as well, I actually talked to G on the phone today and he said that many of his people are at a show in Denver currently so they are a little behind on tickets I think. I made sure to personally thank him for all his dedication to these wonderful products though! :)
 

chronickiller7

Well-Known Member
Can someone point me in the direction (within this thread or not) on using, maintaing, etc. the kiss carts? I feel like while I'm getting decent results, the taste isn't as good as it can be, and its getting dirty quickly. Can't wait for the 74 to be back in stock so I can experience the herc!
 
chronickiller7,

kindbeats

Terps Up, Temps Down
Can someone point me in the direction (within this thread or not) on using, maintaing, etc. the kiss carts? I feel like while I'm getting decent results, the taste isn't as good as it can be, and its getting dirty quickly. Can't wait for the 74 to be back in stock so I can experience the herc!

KISS carts are really designed for one dab at a time. I'm not sure if you're using the grade 2 TI KISS carts but if not, try them out. They have far superior taste than the original KISS carts (still nothing like the flavor you get with the Herc) and are easily the best tasting out of all of the coil/load as you go carts currently available on the market.
 

DaNi_DuB

Vapor Enthusiast
Can someone point me in the direction (within this thread or not) on using, maintaing, etc. the kiss carts? I feel like while I'm getting decent results, the taste isn't as good as it can be, and its getting dirty quickly. Can't wait for the 74 to be back in stock so I can experience the herc!


Kiss carts are load as you go (LAYG), so my personal interpretation of that is to never load any more than I intend to vape within 1-2 hits. If any falls off the coil, I keep a pocket dab tool to get it back on. With this method, my 3.7 carts usually last through about 2-3 grams (high quality, $60-90/gram) before they start to taste like ass. They usually burn out by the 4th or 5th gram. I normally don't clean them at all, just rebuild whenever I deem necessary.

The herc is something that everyone that dabs should own. Don't matter what quality you got, throw it in & play some Marley. I've put like 8 grams of funky ass $20 wax in that mother fucker & it took it like a G. Just beware, not all young jedi can master the light saber overnight.
 
Last edited:

elmoe420

Well-Known Member
Got my order sorted out with W9 and my Nibbler GN arrived today. First impression are in!

I'm using the GN paired up to my globe running a new ti coil on the Omicron. As usually it took me a few mouthfuls of water to dial in the fill level. I settled on filling to just below the 'made in USA' on the glass. The balance in your hand is actually very good and it didn't feel too top heavy or awkward. It took me a second to figure out how you lay it down on a table but with the right fill level it lays down flat nicely. The draw is extremely smooth and allowed me to take pretty big rips off a 3.7v globe. I already thought the taste on the ti globe coils was great and the effect of the water filtration just makes it even better.

Thing is also a definite crowd pleaser. One person commented on how idiot proof it is compared to my Sr-74 + Nibbler XL setup. The glass design is really cool too. Friends who have seen it think its some kind of Victorian Steampunk apparatus hah!
 

Caligula

Maximus
Are kiss carts known to leak as well? Oil seems to be leaking from the center screw under the cap. Do kiss carts require the same hitting and cooling method as the herc?

You loaded way too much. You should be putting a single "nerd candy" (half of a green pea) sized dab on the wick/coil at any one point in time, vaping that off, then repeating as needed.

It has arrived! I dont know what is the fuss about signature delivery, they left it on my balcony...

I really like the look and feel of it. I cant wait to give my hercules sr71 a go. Right now, im not sure if my ceramic rod is stuck in the metal post. I have tried considerable amount of force, but im afraid I will break it instead of taking it out.

dAExsp0.jpg

LOL nice to see FedEx takes their jobs seriously.

As for your rod, it's wayyyyy too far in. The FIRST metal contact (the one at the very end) should barely be visible when it's adjusted properly. It looks like you jammed the rod in there as far as it would go (and then some), seeing as how the second contact is almost to the pronged metal post.
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
elmoe420: would you mind posting some pics on how your globe mates with the Nibbler GN?

Here's one @notoriousLrg , @THC SCIENTIFIC posted a pic a couple of months ago. I've been trying to decide between the g and the gn but they both seem like they ruin any chance of it looking like a regular vape which is something I need where I use mine the most. I can convince people my okeanos is an e-juice whatever, but not sure about these.
 

reece

Well-Known Member
I have a ticket going at the moment as well, I actually talked to G on the phone today and he said that many of his people are at a show in Denver currently so they are a little behind on tickets I think. I made sure to personally thank him for all his dedication to these wonderful products though! :)


Thanks!
 
reece,

lowkee00

Active Member
You loaded way too much. You should be putting a single "nerd candy" (half of a green pea) sized dab on the wick/coil at any one point in time, vaping that off, then repeating as needed.

See this is my problem. If I buy a KISS cartridge, I should be able to pack that thing with more than 2 hits. If I wanted 2 puffs, I'd use the micro g (get more than 2 off than tiny thing as it is.)

Who wants to open every 2 puffs? Even with a small amount they get blasted at 6-7.4 volts and the 3.7 won't power past hard product. Oil splashes and eventually gets in the grooves, even at 3.7 with a tiny pea. And the last 5 KISS cartridges I bought lasted less than 2 months and one was defective.

So what coil should I be using for larger capacity and higher voltage past 4.2, besides Herc obviously.
 
lowkee00,

itschad

Well-Known Member
See this is my problem. If I buy a KISS cartridge, I should be able to pack that thing with more than 2 hits. If I wanted 2 puffs, I'd use the micro g (get more than 2 off than tiny thing as it is.)

Who wants to open every 2 puffs? Even with a small amount they get blasted at 6-7.4 volts and the 3.7 won't power past hard product. Oil splashes and eventually gets in the grooves, even at 3.7 with a tiny pea. And the last 5 KISS cartridges I bought lasted less than 2 months and one was defective.

So what coil should I be using for larger capacity and higher voltage past 4.2, besides Herc obviously.

i mean you definitely CAN load up to like .3 in the kiss if you really want but its not going to taste very good towards the end, though probably it would work better in a 7.4v than 3.7v in my usage experience


ive never had a problem with my 3.7v melting any consistency
 

DaNi_DuB

Vapor Enthusiast
See this is my problem. If I buy a KISS cartridge, I should be able to pack that thing with more than 2 hits. If I wanted 2 puffs, I'd use the micro g (get more than 2 off than tiny thing as it is.)

Who wants to open every 2 puffs? Even with a small amount they get blasted at 6-7.4 volts and the 3.7 won't power past hard product. Oil splashes and eventually gets in the grooves, even at 3.7 with a tiny pea. And the last 5 KISS cartridges I bought lasted less than 2 months and one was defective.

So what coil should I be using for larger capacity and higher voltage past 4.2, besides Herc obviously.

Your only other option would be the o.g. carts (Omicron carts) as anything that's not a herc would essentially be a kiss cart. The main downside to these carts is taste :puke:. You should have read up on what kiss cart was before blindly using it however you wanted since it obviously wasn't what you wanted.
 

lowkee00

Active Member
i mean you definitely CAN load up to like .3 in the kiss if you really want but its not going to taste very good towards the end, though probably it would work better in a 7.4v than 3.7v in my usage experience


ive never had a problem with my 3.7v melting any consistency

It's not the 3.7v melting the product, it's the higher temp I want and a rip roaring pen hit (if that's possible.) I have eyeballing glass lately, but tbh, the pen is just stealthier and safer.

I guess the biggest issues I have overall is just mess and some waste of product . I don't like to keep opening it but I also want flavorful draws.
 
lowkee00,

lowkee00

Active Member
Your only other option would be the o.g. carts (Omicron carts) as anything that's not a herc would essentially be a kiss cart. The main downside to these carts is taste :puke:. You should have read up on what kiss cart was before blindly using it however you wanted since it obviously wasn't what you wanted.

I know what I purchased (obviously), as I have tried about every coil out there. But I want more. Hard to think I am the only one that thinks something is missing from the market.
 
lowkee00,
  • Like
Reactions: kyle2119
Top Bottom