• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

TimSolo

Engineer and vaporizer aficionado
I have the same frit to turbine, mine is a male joint though.
I have a female to male adapter so i've never had issues with this but the joint is pretty close so i'm wondering how easily the arizer will fit on (I sometimes have issues fitting my bigger domes onto it).
Asides from that it functions really really well, you can see a video I did here:
Thanks for the video, very much appreciated! Could you maybe try holding your solo in position above it to see if it would fit? If it doesn't fit for sure I'll probably go with the D020-2S with an adapter like yours, although I don't like to stack my solo too high. I'm currently using this piece from kathy but the honeycomb doesn't give enough diffusion and I sometimes find myself coughing while vaping. It seems to leave about as much space as the pieces above so it probably will be fine...
1.0x0.jpg
 
TimSolo,
  • Like
Reactions: ataxian

FUnhouse

Well-Known Member
How do you think these guys would perform with an arizer solo?

GB-228-F
rBVaGFQ8hEqAE6PPAABvKrNbzow374.jpg


GB-226

I have the same question about this one .
I used the honeycomb version of this with the make joint with a Nano and it fit ok .

I tried to use my Solo with a F to F adapter I only have a male Solo GonG and I didn't like it at all .
Though the Solo was unbalanced and too high up and had too much drag .
I have been looking at this one because of the female joint and Fritted disk and wondering if it would be any better .
 
FUnhouse,

MGG

Well-Known Member
If you're using an old model of the solo (with restrictive draw) then I yeah, adding a fritted disk with that would equal a lot of drag. Unfortunately I can't check the solo right now but I personally dont think it'd fit without an adapter :S
 
MGG,

TimSolo

Engineer and vaporizer aficionado
@MGG With the piece I own (which is similarly built) it fits VERY tightly but it does fit. I have the most recent model of the solo and my adapter has some grooves which allow better airflow. Does the fritted disc have a lot more restricted airflow than a honeycomb? And how does turbine diffusion compare to frit and honeycomb? The GB-215 only has the turbine perc but I don't think it would deliver very smooth vapor although the swirling would look cool =P
temp2.0x0.jpg
 
TimSolo,

calyx

Active Member
I think that it was mentioned that the paint in the logo MIGHT have lead or cadmium. So don't lick the logo.:p It was discussed many pages back that someone soaked the piece in Simple Green (non-toxic) for an extended time and the logo came off. Then just clean and rinse and voila.
That actually really is the easiest way to avoid problems from lead and cadmium on glass, not putting your lips on it. Apparently, the big problem is when it's around mouthpieces, or if you touch the logo and then touch your face/lips/food afterwards. But yeah, remove the logo, rinse well and it should be good to go.

Okay i'm going to just give my 2 cents on those kind of pieces. Personally I'd rather have my flower piece seperate from my dabbing piece ESPECIALLY if i'm smoking.. in concept it's kind of neat but i think it's always nicer to have 1 rig for flowers and 1 rig for dabs..
Oh yeah I agree about the flower part if you're referring to combustion. I don't ever mix my dab rigs with pieces I smoke from because I use the reclaim and resin will fuck it all up. Plus, the resin makes the dabs taste nasty.
I vape through my dab rigs with my ExtremeQ all the time though. That glass had an 18mm female joint, so instead of a bowl I would attach my vape. Definitely not a daily driver, but a good "it's been a long day" kind of glass I thought.
 
calyx,

FUnhouse

Well-Known Member
If you're using an old model of the solo (with restrictive draw) then I yeah, adding a fritted disk with that would equal a lot of drag. Unfortunately I can't check the solo right now but I personally dont think it'd fit without an adapter :S

Thanks
I thought the fritted disk would be a problem .
Still looking for a sidecar to make my Solo happy !
Suggestions welcome!
 
Last edited:

MGG

Well-Known Member
Thanks for the video, very much appreciated! Could you maybe try holding your solo in position above it to see if it would fit? If it doesn't fit for sure I'll probably go with the D020-2S with an adapter like yours, although I don't like to stack my solo too high. I'm currently using this piece from kathy but the honeycomb doesn't give enough diffusion and I sometimes find myself coughing while vaping. It seems to leave about as much space as the pieces above so it probably will be fine...

Tried holding my solo up against the joint, i'm pretty convinced it wouldn't fit without an adapter dude =[
I suggest getting the same as what i got with the adapter from sunshinestore. works really well!
 
Top Bottom