2clicker's vapor emporium

farscaper

Well-Known Member
picked up a new drip tip for the igo-w.
ACXRxSy.jpg
thats cool. where did you find that? I would love to find something like that... if it could hold a little moisture even better!
 
farscaper,
  • Like
Reactions: OldOyler

farscaper

Well-Known Member
I think im just gonna grab one of these
http://www.steammonkey.com/mobile/Product.aspx?ProductCode=UAMP-ADJTT
it turns the kanger aerotank into a dripper. I didnt originally find it... someone here on fc posted it in another thread. I cant remember who so credit to them... but I revisited and asked if it fit the mini. he daid the threadings right it just looks odd... (I figure it looks like one of those honey stiring stick things lol)
I like yhe airflow of the mini and for now it suits me ok. so I would be down for custom areotank heads @2clicker

1 thing I noted about the new sealed heads... if you turn the shield upside down so the wick isnt exposed to the holes it doesnt leak out on the deck as much... if at all... I think I just have some residual puddle from when I installed it initally.

im already using it dripper style.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I think im just gonna grab one of these
http://www.steammonkey.com/mobile/Product.aspx?ProductCode=UAMP-ADJTT
it turns the kanger aerotank into a dripper. I didnt originally find it... someone here on fc posted it in another thread. I cant remember who so credit to them... but I revisited and asked if it fit the mini. he daid the threadings right it just looks odd... (I figure it looks like one of those honey stiring stick things lol)
I like yhe airflow of the mini and for now it suits me ok. so I would be down for custom areotank heads @2clicker

1 thing I noted about the new sealed heads... if you turn the shield upside down so the wick isnt exposed to the holes it doesnt leak out on the deck as much... if at all... I think I just have some residual puddle from when I installed it initally.

im already using it dripper style.
Hi that was me ;) Lemme know how you like it if you do get it, I haven't tried one myself personally as I have a few setups for oil (both for home and on the go) and my actual dripper atomizers are too small for a pancake/DBC. Plus with two drippers I don't really need the aerodripper :ko:
 

farscaper

Well-Known Member
Hi that was me ;) Lemme know how you like it if you do get it, I haven't tried one myself personally as I have a few setups for oil (both for home and on the go) and my actual dripper atomizers are too small for a pancake/DBC. Plus with two drippers I don't really need the aerodripper :ko:
:D:tup:see I knew eventually that would get sorted out. so yes thank you. I am still trying to decide... a little bigger coil wouldnt hurt either though. the aero in drip mode is a mess cause I invert it alot to put it on glass pieces.

I think a diffrent shape coil would help too in the aero heads for dripping. I have a couple ideas, just no rba materials.
 
Last edited:

2clicker

Observer
:D:tup:see I knew eventually that would get sorted out. so yes thank you. I am still trying to decide... a little bigger coil wouldnt hurt either though. the aero in drip mode is a mess cause I invert it alot to put it on glass pieces.

I think a diffrent shape coil would help too in the aero heads for dripping. I have a couple ideas, just no rba materials.

that coil you posted a pic of earlier... obviously smaller to fit in the kanger heads, but if you could make a coiled coil (ha) i think that would absorb a large dab and as long as you hit the heat for a sec or two the oil will absorb into the RXW. then you are good to go upside down w/out a mess.

think about the coil fitting snuggly in the head. the lead coming off the top end could go right down the middle. basically just filling the head with wire and RXW.
 

farscaper

Well-Known Member
that coil you posted a pic of earlier... obviously smaller to fit in the kanger heads, but if you could make a coiled coil (ha) i think that would absorb a large dab and as long as you hit the heat for a sec or two the oil will absorb into the RXW. then you are good to go upside down w/out a mess.

think about the coil fitting snuggly in the head. the lead coming off the top end could go right down the middle. basically just filling the head with wire and RXW.
basically the pos end woud come strait up the center and then coil around itself back down for neg. with the coil inside the rxw like you have been showing was what I was thinking...

im fairly certain half my mess issue is cause im afrade to give it heat cause I taste the scortch if I do... I blame the sillica wick!
 
farscaper,
  • Like
Reactions: 2clicker

matthend

Well-Known Member
3 DBCs and rebuild kit arrived and loaded...:ko:
The extra room afforded by the set screws is very useful, but I think I am still going to end up with an aftermarket top for the igo-w very soon. Initial impression is very good, I will update after further testing.
Thanks 2clicker!!!
 

2clicker

Observer
3 DBCs and rebuild kit arrived and loaded...:ko:
The extra room afforded by the set screws is very useful, but I think I am still going to end up with an aftermarket top for the igo-w very soon. Initial impression is very good, I will update after further testing.
Thanks 2clicker!!!

yes my HALO cap provides a tad more room than my stock igo-L cal does.

enjoy!
 
2clicker,

kingtut106

Well-Known Member
I'm not sure if we are supposed to post here for order requests, but I pm'ed you as well. I was interested in getting the 3 pack of 1 ohm diamondback coils.
 
kingtut106,
  • Like
Reactions: 2clicker

2clicker

Observer
public service announcement... im out of RXW and need some wire as well. it may be a few days before i can get to any new orders.

@kingtut106, yep i got your PM and reply sent.
 
2clicker,

2clicker

Observer
just wanted to thank everyone for the kind words via PM and for the orders.

im ordering more wick today and should be building again later this week.

also, new stuff coming (i know ive said that before, but im for real). i have been having a hard time locating some materials, but i will have a new coil hopefully before the end of the year. this requires custom machined parts. thats why its taking so long.
 
2clicker,

AnthoFranco

Well-Known Member
i am glad i found this thread.

plotting my orders and planning a couple of builds.

gonna try out that EJMix as well. (that clearomizer is gonna be another adventure)

i get way ahead of myself. i got to get tools 1st.

so many places to shop. seem most have the same thing.

popping my KISS NiCh 3.7 brought me out of the W-9 thread.

i dont know if that is good or bad for them.
 
AnthoFranco,
  • Like
Reactions: 2clicker

2clicker

Observer
so i have had some requests to build rigs for FC members.

i may start putting kits together and listing them here. or maybe its best to have the end user ask for specific stuff...?

any thoughts?
 
2clicker,

2clicker

Observer
so i have had some requests to build rigs for FC members.

i may start putting kits together and listing them here. or maybe its best to have the end user ask for specific stuff...?

any thoughts?
 
2clicker,

AnthoFranco

Well-Known Member
dude that patina is awesome!

will it continue to patina with use/handling? or once chemicals removed it stops.

ive been looking @ a few different tobeco rda's. tobeco seem's a little nicer than some less expensive clones.

and because of that, i may purchase a tobeco mechanical mod.

anyway, have a good week.
 
AnthoFranco,
  • Like
Reactions: 2clicker

2clicker

Observer
yes patina will continue to develop if not sealed. i sealed this in a matte finish wheel coating. hopefully its durable.

best thing with patina is that if you dont like it... you can easily sand it off and redo it.

i may get a few more copper Primes and patina them. then offer them in here.

also, i should have "rigs" or kits for sale soon. these will include mod, RDA, coils, batteries, and charger. all kits will have 5 DBC coils w/ one pre-installed.

@OldOyler... the wire should arrive today so your kit should be ready very soon!
 

OldOyler

Fire it again. I can still find the ground.
@matthend ,

NNNOOOOOOO! They are out of stock!

:-)

Seriously, I AM getting one as soon as they are available!

@2clicker how did I not realize this thread was here...D'oh!

Sounds good, I'm pumped! That custom rig kit idea is was a lifesaver for me. I have enough to make my head hurt *already*. I really do appreciate your extra attention to all your materials, too.

And getting everything from you, in one setup, and not having to deal with any shady suppliers?

Priceless.

:tup:

Peace!
 
OldOyler,
  • Like
Reactions: 2clicker
Top Bottom