• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

max

Out to lunch
A short usually results in something getting fried, since it's current being sidetracked down the wrong electrical path. With an open circuit, you could have loss of operation or heat, which would be restored when the proper circuit is remade.
 

ACE OF VAPE

Vape outside the box
Manufacturer
So I've had my nano for a few months (fewer than 6, but I'm not really sure when I got it,) and the light indicator has started to blink sometimes when it's plugged in. When this happens, it gets warm, but not as warm as the dial would suggest. sometimes while it is blinking, the light turns off completely while it is plugged in, and it won't begin heating again until I unplug and replug it. It sounds like the wiring is a bit loose, but I obv. don't want to pull it apart.

What should I do?
Go to the website and get an rma and send her back. Like Max said, It's not a short. A short would cause the triac in the dimmer to fail and the nano would no longer recieve any power. Most likely you have a break in one lead on the cord causing an intermittent open circuit. It's covered under the warranty.
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Go to the website and get an rma and send her back. Like Max said, It's not a short. A short would cause the triac in the dimmer to fail and the nano would no longer recieve any power. Most likely you have a break in one lead on the cord causing an intermittent open circuit. It's covered under the warranty.
Great EpicVape service as always! I wish all the rest of the world's product customer service were this good and easy!
 

exit

Well-Known Member
I had an awful dream last night. But at least I now know how much I love my nano :lol:

I had a dream I was in the the shower and I had my nano plugged in and had it sitting on a rack of shower items right under the faucet head!

I picked it up to hit it and realized the light had gone off and there was a little water pooled up on the inside. I dried it out frantically and it came right back on and started hitting again perfect.

Then I realized I was dreaming because I would never bring my nano into the shower, so I woke up and did 2 gongs out of my pulse showercap.

I don't think even a solo has made it into my dreams. This might be my inaugural dream vape.
 

LazyIdol

Well-Known Member
Does anyone have any thoughts on the aroma therapy bowl they sell on the epicvape site? I was inspired by Snappo's aromadog and was wondering how sucessful people have been with the enano. I figure if my enano is going to be heating all day anyways it might as well make my room smell dope. I thought I remembered some people saying that it fit too loosely and didnt work that well.

Hope everyone is having a great weekend!
:peace:
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Does anyone have any thoughts on the aroma therapy bowl they sell on the epicvape site? I was inspired by Snappo's aromadog and was wondering how sucessful people have been with the enano. I figure if my enano is going to be heating all day anyways it might as well make my room smell dope. I thought I remembered some people saying that it fit too loosely and didnt work that well.

Hope everyone is having a great weekend!
:peace:
The UD copper cup comes outfitted with a very heat resistant nylon(?) ring at the top. The ring can be moved down to the level you need to stabilize the cup on/in the Nano rim so that it doesn't wobble around. UD can probably provide extra nylon rings so you have one to stabilize and one to enable safe contact. See pic below:
E8MZ7f3.jpg
 

LazyIdol

Well-Known Member
That looks like a very good option. Snappo to the rescue once again!

I will probably look into the UD copper cups, that seems like my best option. UD's and Enanos have a pretty similar sized opening I am guessing? I no longer have my solo aromatherapy bowl. Figured I would never need it haha

I will probably order some of the arizer screens that fit in the bottom of the gong while I am at it!

Such positive vibes in this thread!
:peace:
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
That looks like a very good option. Snappo to the rescue once again!

I will probably look into the UD copper cups, that seems like my best option. UD's and Enanos have a pretty similar sized opening I am guessing? I no longer have my solo aromatherapy bowl. Figured I would never need it haha

I will probably order some of the arizer screens that fit in the bottom of the gong while I am at it!

Such positive vibes in this thread!
:peace:
I just tried the copper cup & nylon ring (positioned about 1/4" from bottom) with the Nano. Since the Nano heating rod tip is very near the top of the Nano, the nylon ring needs to be positioned perfectly so that the cup is able to make direct contact with the rod tip while resting in/on the Nano rim. The copper cup is much more stable and wobbling is greatly reduced, but the unit should still not be bumped too hard. I find that it does work very well for what we want!
 

ataxian

PALE BLUE DOT
I just tried the copper cup & nylon ring (positioned about 1/4" from bottom) with the Nano. Since the Nano heating rod tip is very near the top of the Nano, the nylon ring needs to be positioned perfectly so that the cup is able to make direct contact with the rod tip while resting in/on the Nano rim. The copper cup is much more stable and wobbling is greatly reduced, but the unit should still not be bumped too hard. I find that it does work very well for what we want!
Hey @Snappo

Do you have a D022 for your NANO?
Wait until you see my new 18mm GonG!
I had to sell my vaporizer collection because the NANO is so much better?
 

ataxian

PALE BLUE DOT
Actually, I am very satisfied with my D-2020.
I have the D020 as well and have been using this with a lot of vaporizers.
Did not mean to get you pissed off?

I used the D022 with the NANO just now and it was pretty amazing!

I just was wondering if you had the D022? The D020 works well however the D022 has a little more volume is why I asked?

@exit knows!
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
I have the D020 as well and have been using this with a lot of vaporizers.
Did mean to get you pissed off?

I used the D022 with the NANO just now and it was pretty amazing!

I just was wondering if you had the D022? The D020 works well however the D022 has a little more volume is why I asked?
Not pissed in the least! Don't know how you got that notion. Anyway ...I like the D-2020 can size because my lung capacity is way shy of optimal, and the overall simple design, height, and mouth piece angle is perfect for me. The price was right too!!! EDIT: Don't wish to derail this thread with off-topic discussion.
 

ataxian

PALE BLUE DOT
Not pissed in the least! Don't know how you got that notion. Anyway ...I like the D-2020 can size because my lung capacity is way shy of optimal, and the overall simple design, height, and mouth piece angle is perfect for me. The price was right too!!!
@Snappo I just ranting!
The D020 is a great bubbler. I paid $29 delivered to my front door!
I use it a lot!
I pull out the D022 tonight and filled the GonG with Girl Scout Cookies that is common in California.

Flavor unreal!

I'm just messing around and Medicating no hard feelings!
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
@Snappo I just ranting!
The D020 is a great bubbler. I paid $29 delivered to my front door!
I use it a lot!
I pull out the D022 tonight and filled the GonG with Girl Scout Cookies that is common in California.

Flavor unreal!

I'm just messing around and Medicating no hard feeling!
Enjoy my good friend! The Nano is the perfect companion for a leisurely evening!!!
 

LazyIdol

Well-Known Member
Can anyone recommend a place for the molded arizer screens that fit in the bottoms of 18mm gongs? I noticed PIU carries them but only at 6.99$ for 2.
 
LazyIdol,

Newcastle

Stoned!
Ya I ordered the screen kit knowing I only wanted the two dome screens. They are softer than my original screens that came with the Extreme Q. I don't know if they get theirs from somewhere else or they might all be that way now? When I scrape them with the E-pic I can cave them in if I'm not careful. They are fine I just baby them a little. They are also skinny and I again use the pic and stretch out the sides and they stay in. Has anybody else noticed the change or difference?
 
Newcastle,

vaplen

Well-Known Member
Just purchased an aromatherapy cup and got this in an email:

"You have received 0 Reward Points!

Your total number of reward points is now 0."

What can I get with my 0 points? :lol:

@ACE OF VAPE is the reward point thing still a work in progress?
 

Melting Pot

Sick & Twisted
I guess it would be dumb to ask if the ev-2-enano combo still available.I'll just throw it out there lol
 
Melting Pot,
Top Bottom