Pen Imag Plus

Puffers

Micro-Climate Mastermind
FWIW

I haven't had any problems with my Imag+ and it's still getting used pretty much daily. I havent used the stock mouth piece in over a week though. The first week I was doing hi temp sessions back to back with the stock MP and never had a problem but I don't think I went anymore then 2 hi temps back to back. The manual does state that the unit should be given 1 minute to cool after a session before restarting another heat cycle though....
 

Kaptan

Well-Known Member
Please ship the unit to us and put in the notes that it needs to come directly to Gary, once we receive it i will contact the manufacturer and see what we can do and when we can get a unit to you by.

Please understand there will be shipping charges and customs fees that will apply when we ship the unit to you since we have to pay customs fees for our deliveries.
Thank you for the offer. It was very nice of you to step up and help. Shirley is replying to my email now. I was advised there was a holiday. I guess the holiday lasted a week? I'd prefer not to put anymore money into the unit after only 10 days of it operating. I was actually going to purchase a few more for friends, but I'll see how this progresses first. :nod:
 
Kaptan,

mrweed

vaporizer review blogger
Actually, I'm sure they already work on a new mouthpiece. The Relaxo Tech guys check this thread on a regular base. FC is where I've found them in the first place, before they've got banned because of their unauthorized commercial account.
Anyway, I will send them an email and ask them directly. Although I'm quite sure you won't be able to exchage it free of charge, but I hope they will offer them as a replacement part on their ebay shop at least and don't just add them to the next batch.
 

TNT_error

Well-Known Member
I agree with @mrweed. I emailed them about the whole MP issue and this is what I got :


We're designing a new type of MP with the two new features:
1. it can fit more tight with the heating chamber. when you carry the IMAG in your pocket with herbs fully loaded, the MP won't break from the heating chamber so easily.
2. the screen is detachable. you can change the screen as you wish.
However, the heating chamber will be changed accordingly to fit the new MP. which means, those current IMAG PLUS can only use current MP.
anyway, we will work with US distributor W9tech and provide a batch of MPs to them so you guys can get extra MPs to replace the broken ones.
You can contact W9tech for more help.

Best Regards,
Raymond Xu


So for current models we are stuck with the stock MP (that is if w9 will carry them). Kinda sucks knowing this...
 
@TNT_error - Since you're already talking to them, can you ask when they expect the updated version to go on sale?

@HSIHP - Did you ever try the cotton in this to help the filter problem? How'd it go?
 
Last edited by a moderator:
marsbars439,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Damn, they're not going to send me 2 imag plus's, I can get a free titan 2 though. Do I want a titan 2? Some people say it's ok and some people say it's a plastic tasting/smelling hell.

I kind of want to cancel and wait for the new version with the new mp.
 
StormyPinkness,
I've got one on the way as well. I believe it will be shipped either tonight or tomorrow. As far as I know that is the latest model. There is no more 2 for $100 deal anymore. I agreed to take a Titan 2 as a bonus. Sounds fair to me. If the Titan 2 is no good for me I'm sure it will make a nice gift for someone else :)
 

HSIHP

Well-Known Member
@HSIHP - Did you ever try the cotton in this to help the filter problem? How'd it go?

I did and it went well. I haven't spent enough time with it yet to give a solid answer though, I can into a few vapes these past two weeks and usually only partake on the weekends. I'll give it another shot on Saturday.

That said, I did try a tincture soaked cotton ball and had great results. This will most likely become my foot set up for concerts and festivals.
 
HSIHP,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Alright, so if we're stuck with the crappy mouthpiece, and it seems like the new one will be plastic again with no wpa, I think we need @Ed's TnT over here to see if he can make us a much more acceptable solution (and one that can connect to 14/18mm too). Any chance @THC SCIENTIFIC could send him a sample Imag Plus for him to get started? I know hes a busy man, but having him craft a Wong for the Indica made me realize we really need the same for the Imag now...
 

Ed's TnT

Woodsman
Manufacturer
@Shit Snacks what this bro, pls tell me more! You know I'd be happy to do whatever is possible. I just got my Indica yesterday matter of fact. I am tossing around a couple ideas for it now. Be nice to do something else while it's a little slower for now. I am having so much fun doing all this new stuff! I looked at the first page of this thread to get a look at this device, need a better look at the PM and how it attaches to the unit. Still you guys know I really need it in my hands for accuracy. Thanks for thinking of me and what I do. Most of the time the secret is just showing up early and getting lucky!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks what this bro, pls tell me more! You know I'd be happy to do whatever is possible. I just got my Indica yesterday matter of fact. I am tossing around a couple ideas for it now. Be nice to do something else while it's a little slower for now. I am having so much fun doing all this new stuff! I looked at the first page of this thread to get a look at this device, need a better look at the PM and how it attaches to the unit. Still you guys know I really need it in my hands for accuracy. Thanks for thinking of me and what I do. Most of the time the secret is just showing up early and getting lucky!

Ed! I'm really excited to see what you come up with for the Indica, an 18mm wong would be incredible for that little guy, his vapor needs some diffusion at the upper temps to limit my coughing!

I hope w9tech can send you a sample Imag, since it probably is necessary to have one in person to get the fit right into the oven. Otherwise they're not very expensive fortunately, which also means there will be quite a few owners willing to shell out for a new mouthpiece, particularly one of your wonderfully crafted beauties! And similar to the Indica, the Imag really needs the wong for its high temps. Our throats will greatly appreciate it!
 

Ed's TnT

Woodsman
Manufacturer
@Shit Snacks I am excited to see what I can do for the Indica as well. Was just driving shortly ago and had another idea pop up in my head for another method of going about it. The hard part is going to be fitting the rectangle shaped connection. Am so accustomed to everything I am doing being round in some way or another. This one has really got me thinking and thats a cool thing!

Its just necessary to have the vape in my hands, too may times people have sent me just the stem and I would do my best to mimic it but something winds up being just a little off. A few .001" one way or another tend to make a difference whether good or bad. Some units are just so damn precise that I have to be dead on to get it to look right and most importantly preform right. I like when my pieces look like they were intended to be used with the unit they are paired with. From what I could tell by the pic I saw of it, I should be able to create something to benefit you all.
 

Ed's TnT

Woodsman
Manufacturer
@TNT_error I thank you for the offer bro, I would be more than happy if you sent that unit to me! Thanks for the offer to do so bro! Will hit you up with with my address in a PM. I look forward to doing the work, sounds easy enough if thats all it is. I appreciate you!
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Can I post the list of e-cig gifts they give with every Imag plus so someone can recommend which one worths it?

I would actually like to see the list, she just said I could have a titan 2 or pick from a list. Didn't email back for the list yet.

I'm more inclined to buy it now that it sounds like we'll be able to buy a quality custom mp for it. Just not sure about he titan 2.....
 
StormyPinkness,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I would actually like to see the list, she just said I could have a titan 2 or pick from a list. Didn't email back for the list yet.

I'm more inclined to buy it now that it sounds like we'll be able to buy a quality custom mp for it. Just not sure about he titan 2.....

From CiCy: "All the buyer can choose one gift such as : Orginal Aspire Nautilus ; Orginal Titan 1 or Titan 2; Orginal Spinner 2 ; Orginal ego II 2200mAh battery and so on."

Thanks @TNT_error for hooking @Ed's TnT up! I think it should be pretty simple to have a wooden mp that can connect (at least its round hehe) and use a much better screen that is replaceable. Waterpipe connection will be wonderful as well, could really take the Imag to the next level. Looking forward to the results!
 
Last edited:

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
From CiCy: "All the buyer can choose one gift such as : Orginal Aspire Nautilus ; Orginal Titan 1 or Titan 2; Orginal Spinner 2 ; Orginal ego II 2200mAh battery and so on."

Thanks @TNT_error for hooking @Ed's TnT up! I think it should be pretty simple to have a wooden mp that can connect (at least its round hehe) and use a much better screen that is replaceable. Waterpipe connection will be wonderful as well, could really take the Imag to the next level. Loomig forward to the results!

Thanks dude. Don't really want the titan 2 much, but I don't need any of that other stuff, I only vape wax and don't need anymore ego battery things. Oh well, I'll give it as a present or use it as my guest vape for people I don't want mouthing the stuff I use.
 
So I have just been informed by Cicy that the Imag will not ship as expected . More testing is being done and no shipping date has been confirmed. I'm starting to smell the familiar scent of bullshit.
 
Mr. Gweilo 420,
  • Like
Reactions: FUnhouse

natural farmer

Well-Known Member
So I have just been informed by Cicy that the Imag will not ship as expected . More testing is being done and no shipping date has been confirmed. I'm starting to smell the familiar scent of bullshit.

I need to get one or two Imags as well and dear Shirley sends me a mail every day, but I'd rather wait for the updated version. I wish they fix the mouthpiece and screen and make the batteries replaceable again…
 

Reflexion

Well-Known Member
The mouthpiece isn't that big of a deal, IMO
Drill out the center and cut a screen that fits on top of the herb chamber. Kinda ghetto but it works

A custom made mp would be nice. I have a spare mouthpiece I could donate to ED.. if nothing else
 
Top Bottom