• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Persei Vaporizer for herbs and concentrates.

jagroat

Vaporizer Connoisseur
Can I use the ceramic donuts for the normal kiss cart? And does the rebuild kit for the kiss include the white cups on the inside?

The 1701 Donut is made for the KISS globes or similar KISS globe devices such as the Nibbler G and GN. It replaces the "globe coil part". GO 1701!

I also ordered an SR-71! WOOT!
 
Last edited:

elmoe420

Well-Known Member
@THC SCIENTIFIC Was wondering if you could clarify some things.

  • If I order a new Okeanos will I receive a v2 or do I need to also order the v2 upgrade kit?
  • The Okeanos comes with a special 3.7v Kiss cart. Can I replace this with the Ti Kiss carts you have up for sale currently? Specifically will the 7.4v Ti Kiss cart work with the Okeanos v2?
  • What is the difference between the Ophos and Omnicron Lite? The product descriptions are not clear. I need a replacement for a lost G-Pen.
  • Will the Okeanos v2 work on an Ophos or Omnicron Lite or only my Persei?
  • If I order the Kiss Globe with Persei threads which is now back in stock which coil will it come with? Ti or normal?
  • Are there currently any valid promo codes?
  • Any reviews of the Nibbler GN up? GN + Kiss Globe is just irresistible to me now.
Thank you!!
 
elmoe420,

SamuraiSam

Extraction Technician
How's the assembly different from the 71 to 74? Can only find the video for the 74.
@THC SCIENTIFIC Was wondering if you could clarify some things.

  • If I order a new Okeanos will I receive a v2 or do I need to also order the v2 upgrade kit?
  • The Okeanos comes with a special 3.7v Kiss cart. Can I replace this with the Ti Kiss carts you have up for sale currently? Specifically will the 7.4v Ti Kiss cart work with the Okeanos v2?
  • What is the difference between the Ophos and Omnicron Lite? The product descriptions are not clear. I need a replacement for a lost G-Pen.
  • Will the Okeanos v2 work on an Ophos or Omnicron Lite or only my Persei?
  • If I order the Kiss Globe with Persei threads which is now back in stock which coil will it come with? Ti or normal?
  • Are there currently any valid promo codes?
  • Any reviews of the Nibbler GN up? GN + Kiss Globe is just irresistible to me now.
Thank you!!
I'm not Gary, but I can answer some of these.

1. Probably get the V2 but I'm not sure on this one.
2. It comes with a Ti Kiss cart, the same one you'd order on the site. You can order a 7.4V Gr 2 Ti KISS cart right now and it'll work with the Okeanos.
3. O-Phos has external EGO threading and the KISS carts to fit it are special and have a skirt. They still have 601 threading for the cart attachment. The Omicron Lite can take the same cart as an Omicron or Persei with no gap. The Omicron Lite has been updated to have the nice features of the O-Phos like the floating center pin.
4. Okeanos will work on any 3.7V 601 threaded device all the way down to the Minicron Lite. It will work on the O-Phos too, but you'll have some bare exterior threaddf.
5. Kiss Globe comes with a std. wire. Ti is comparatively expensive, and is priced per "coil".
6. Nibbler GN looks pretty neat. I like the dedicated water chamber. Unsure of how it compares to the Nibbler G yet.
 

sethhobrin

Well-Known Member
I am having some difficulty with the SR-71 i just purchased. I loaded .4 and .6 for a total of 1 gram of stable shatter/wax.

I got a couple hits but now every time I try to hit it the coil rises and it can't produce anything. I squished it a bit so it wouldn't slide so easily before I put it in but it didn't seem to help. I've tried taking very slow hits.
Am I using the wrong coil? I was told to buy the little TI coil to go with the SR-71 but the SR-71 came iwth this very large oil coil which I did not use. I dropped in the little TI coil after squishing it so it was a little more oval. Am I supposed to be using that much larger coil? Any tips for a beginner? How do I get the coil back down now without pushing all the wax down there?
 
sethhobrin,

Fredster951

Well-Known Member
I am having some difficulty with the SR-71 i just purchased. I loaded .4 and .6 for a total of 1 gram of stable shatter/wax.

I got a couple hits but now every time I try to hit it the coil rises and it can't produce anything. I squished it a bit so it wouldn't slide so easily before I put it in but it didn't seem to help. I've tried taking very slow hits.
Am I using the wrong coil? I was told to buy the little TI coil to go with the SR-71 but the SR-71 came iwth this very large oil coil which I did not use. I dropped in the little TI coil after squishing it so it was a little more oval. Am I supposed to be using that much larger coil? Any tips for a beginner? How do I get the coil back down now without pushing all the wax down there?
You have to squish the coil more so it grabs the walls of the chamber. Squish it enough to oval it.
 

SkrACHIN

Well-Known Member
Ok quick update I have switched the bottom adapters on the current 74's in production with the 71 bottom adapters.

And I do have a few extra bottom adapters from the very first 71 PTFE parts that I would send out for free to 8 orders as long as shipping is paid.

This should solve most of the 74 issues, and then once we get the new center pins ready they will go out to people who have had issues with the 8 button if the bottom adapter has not fixed it yet.


Please remember only ask for the center pins if and after you try the sr71 bottom adapter and if that has fixed it then you don't need the center pins anymore.

I'm gonna rely on the honor system but shipping is still going to be charged.



And I'm working on gettig the 8 rebuild kits up ASAP.


YES PLEASE! I can't get the Herc and 8 to work and I'm sure it's the bottom adapter. Goes when it's naked. I need one of these new bottom adapters. But does this work with the nibbler xl?
 
SkrACHIN,

jpdnkstr

Well-Known Member
I haven't been able to use my Nibbler xl since getting it due to a seal issue.... the top o-ring doesn't even touch the glass, any tips or pointers will be appreciated.
 
jpdnkstr,

konmo

Active Member
I am having some difficulty with the SR-71 i just purchased. I loaded .4 and .6 for a total of 1 gram of stable shatter/wax.

I got a couple hits but now every time I try to hit it the coil rises and it can't produce anything. I squished it a bit so it wouldn't slide so easily before I put it in but it didn't seem to help. I've tried taking very slow hits.
Am I using the wrong coil? I was told to buy the little TI coil to go with the SR-71 but the SR-71 came iwth this very large oil coil which I did not use. I dropped in the little TI coil after squishing it so it was a little more oval. Am I supposed to be using that much larger coil? Any tips for a beginner? How do I get the coil back down now without pushing all the wax down there?
I was having the same issue. Just squish it more where its touching two sides of the chamber. It should be somewhat of a tight fit. I haven't had it rise up since then.. I can't even get my 8 to fire up the sr74 :cry:. It was working good then it just stopped firing. I tested with a multimeter but still not working. I'm thinking it's definitely the center pins not making good contact because it will randomly just stop working.
 

Caligula

Maximus
I feel like I must be on crazy pills because my SR74 titanium coil has never moved and I've gone about 3 grams through it so far.

Tolerance variation. I'm sure some could need more "squishing" than others to get the same overall diameter.

That said I finally got off my ass and ordered a 1701 to try as well as a replacement KISS Globe and some Ti coils to play with.

Anyone have input on the Ti cores for the glove versus the standard ones?
 

chronickiller7

Well-Known Member
Do the 3.7v kiss carts taste better than the 7.4? I've noticed when the coil is bare and the oil is on the sides and below the coil, it doesn't taste too good. I'm thinking I should just wait for the 74. Is the 74 for shatter and oily bho?
 
chronickiller7,

Caligula

Maximus
Do the 3.7v kiss carts taste better than the 7.4? I've noticed when the coil is bare and the oil is on the sides and below the coil, it doesn't taste too good. I'm thinking I should just wait for the 74. Is the 74 for shatter and oily bho?

The 3.7 has less of a chance of overheating the oil which is where a lot of the bad flavor comes from. Regardless of voltage, though, you need to keep the wick and wires coated in oil to.avoid burning stuff.

The 74 will vape anything you put in it.
 
Caligula,
  • Like
Reactions: ataxian

itschad

Well-Known Member
What kind of results do you guys who run the 3.7v rod get in the 4.2-4.5v range?

i MIGHT have acquired another SR71
 
itschad,

reece

Well-Known Member
Hi, I just received a new Persei. As per the instructions, I began the initial charge with one battery. The light was solid red for a few minutes then began flashing red. I tried the other battery and got the same result. I then tried both batteries together and same thing, solid red for a few minutes then flashing red. The instructions say nothing about flashing red.

I've searched through the thread and I've seen some users say flashing red for one battery means it is charged but it does not say this in the instructions, nor have I seen @THC SCIENTIFIC confirm this.

Is this the case, or is something wrong?
 
reece,

StickyShisha2

Well-Known Member
@reece as far as i know, the flashing red/green is when its almost fully charged. on a side note, I dislike the stock charger and hate the stock batteries. But you'll never separate me from my Persei/Herc/NXL combo

I haven't been able to use my Nibbler xl since getting it due to a seal issue.... the top o-ring doesn't even touch the glass, any tips or pointers will be appreciated.

i had the same issue. i needed thicker O-rings than came with my NXL. but had trouble finding the right size.
I opted to carve a groove for the top oring on the heat shield body itself, between the side holes and the mouthpiece. This way the MP won't accidentally pull off inside the bubbler
 
Last edited by a moderator:

reece

Well-Known Member
Thanks for the reply, StickyShisha

Flashing red and green, or flashing red or green. The batteries come pre-charged?

Sorry if I seem a little thick, just trying to be very specific so I don't screw anything up. This is the most intimidating vaporizer I've ever owned. And I say that just from browsing this thread. I haven't used it yet.
 
reece,

DaNi_DuB

Vapor Enthusiast
Thanks for the reply, StickyShisha

Flashing red and green, or flashing red or green. The batteries come pre-charged?

Sorry if I seem a little thick, just trying to be very specific so I don't screw anything up. This is the most intimidating vaporizer I've ever owned. And I say that just from browsing this thread. I haven't used it yet.

It'll start of solid red (dead), then flicker red/green (almost there), then go solid green (vape on brotha). But you should pick up an intllecharger i4. Probably the most recommended charger on this thread (I have one too).
 

DieHard

Accessory supplier
Accessory Maker
It'll start of solid red (dead), then flicker red/green (almost there), then go solid green (vape on brotha). But you should pick up an intllecharger i4. Probably the most recommended charger on this thread (I have one too).
I have a Nitecore D2 charger. I really never need to charge 4 at once so the 2 slot D2 is great. The LCD screen gives all kinds of information also.And for $18.49 the price is right.
http://www.amazon.com/Nitecore-D2-R...F8&qid=1412807668&sr=8-2&keywords=Nitecore+d2
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC Was wondering if you could clarify some things.

  • If I order a new Okeanos will I receive a v2 or do I need to also order the v2 upgrade kit?
  • The Okeanos comes with a special 3.7v Kiss cart. Can I replace this with the Ti Kiss carts you have up for sale currently? Specifically will the 7.4v Ti Kiss cart work with the Okeanos v2?
  • What is the difference between the Ophos and Omnicron Lite? The product descriptions are not clear. I need a replacement for a lost G-Pen.
  • Will the Okeanos v2 work on an Ophos or Omnicron Lite or only my Persei?
  • If I order the Kiss Globe with Persei threads which is now back in stock which coil will it come with? Ti or normal?
  • Are there currently any valid promo codes?
  • Any reviews of the Nibbler GN up? GN + Kiss Globe is just irresistible to me now.
Thank you!!

1. We only have the second generation Okeanos in stock.
2. All current Kiss carts are compatible with the Okeanos
3. Ophos uses a 601 ego threading while the Omicron Lite uses a 601 flat top, we dont know what the gpen threading is and cant comment.
4. The Okeanos will work with both, looks is different matter.
5. Normal Coils for the Globe
6. W9tech is a promo code
7. few people have done reviews
 

DieHard

Accessory supplier
Accessory Maker
1. We only have the second generation Okeanos in stock.
2. All current Kiss carts are compatible with the Okeanos
3. Ophos uses a 601 ego threading while the Omicron Lite uses a 601 flat top, we dont know what the gpen threading is and cant comment.
4. The Okeanos will work with both, looks is different matter.
5. Normal Coils for the Globe
6. W9tech is a promo code
7. few people have done reviews
Just left a Review for the Ti KISS rebuild kit.:tup:
 
Top Bottom