Cheap High Quality Bubbler

oli

Well-Known Member
Hopefully these won't be long to hit our shores

http://www.mzglassarts.com/e_products/?big_id=11&small_id=&page=3&key=

C38XGP8.jpg


WrlzyHI.jpg


1y6Oe28.jpg


fu3KEaQ.jpg
 

cybrguy

Putin is a War Criminal
I can't help but wonder why so much of the design effort in glass seems to go towards oil rigs, that really are (IMO) too small for flowers. Do oil and concentrates make up THAT large a share of the vaporizing market?

Edit: I opened a thread in Ask FC about this question. Please add your own response there.
 
Last edited:

ataxian

PALE BLUE DOT
I can't help but wonder why so much of the design effort in glass seems to go towards oil rigs, that really are (IMO) too small for flowers. Do oil and concentrates make up THAT large a share of the vaporizing market?
The D020 is small enough!
 
ataxian,
  • Like
Reactions: oli

FUnhouse

Well-Known Member
Does anyone know if some one carries a low profile 18mm f to f adapter .
I got one form SSS and it is like 3 inches long. Seems to me they could remove at least a inch and sitll have it work .?
 

grokit

well-worn member

oli

Well-Known Member
Does anyone know if some one carries a low profile 18mm f to f adapter .
I got one form SSS and it is like 3 inches long. Seems to me they could remove at least a inch and sitll have it work .?

You mean like the Low DDave adapter over on the EQ thred? There is even a link but over here (europe) the links does not work...

:rockon:

Hi oldiebutgoodie,
Correct. Originally, was just the F/F adapter and the stock Q elbow. Performance increased from both Elbow Packs and standard bowl loads (for me, elbow packs resulted in more vapor, standard load more flavor).

The along came Tweak :clap:, improving on perfection, he suggested the SSV Wand. And improve things it did! You are again correct in stating that the material is placed between the stock SSV Wand screen and Q-elbow screen. And as odd as it sounds, performance improved dramatically. Not sure on the technicals behind it, but a medium-strength draw results in the herb packing itself up against the SSV Wand Screen and performing like an Elbow Pack, but with less drag. A slower drag and you will be able to watch ALL your material dancing on top of the Q-elbow screen within the Wand.

On many occasions, I prefer a quick-strong session, whereby I can extract the most goodies with the least amount of draws. The F/F & SSV Wand combo allow just that. What used to take 20 draws to reach desired levels, now takes 4-5. And, on the chance that I'd prefer a slower, more-draw but more flavorful session, I simply load the F/F adapter and place the SSV Wand on top (using the SSV Wand in the same manner as the Q-Elbow), drop temp a bit. Then sit back & enjoy. :science:
Hope this helps!
DDave



Hi Liberty, depends on what you're looking for.
* Quick session: Starts and stops at max temperature you normally vape to. This gives quickest extraction.
* Flavorful Session: Starts low and stops at max temperature you normally vape to. This gives just about the same medicating experience, but you get to enjoy the flavors much more during the beginnings of the session.
* Some now, Some Later session: Starts and ends at low temperature, more of an uplifting-energetic effect. Then product is saved for later vaporizing at higher temperatures (more sedative, pain killing effect).
Hope this helps!
Vape On!


Hey Da_Man, I dont think that is the adapter that will fit nicely within the Arizer. Here's a picture of mine. Look at the middle ring section and at how they differ. The one I found fits very nicely. From feedback we see on this site on the other adapter, the center glass ring is too wide to allow the adapter to sit on the heater.
fnjj.jpg


Hope that helps! If you find other adapters, send the links my way and we'll eventually locate the proper adapter.

Vape On!
 
oli,

oli

Well-Known Member

Those designs are.. interesting.

might pick up one of these
http://www.mzglassarts.com/html_products/oil-rig-recyclers-538.html

I think i'd prefer this if it was just a female gong on the top like the other d020-d
http://www.mzglassarts.com/html_products/glass-oil-rigs-589.html

Don't want to be a spoilsport but I did say "Hopefully these won't be long to hit our shores" Hopefully as this appears to be a factory

http://www.mzglassarts.com/html_info/about-us.html

So hopefully these won't be long to hit one of our favourite DHgate sellers :rockon:
 

vapordab

Medical+FC=Recreational
I can't help but wonder why so much of the design effort in glass seems to go towards oil rigs, that really are (IMO) too small for flowers. Do oil and concentrates make up THAT large a share of the vaporizing market?

Edit: I opened a thread in Ask FC about this question. Please add your own response there.

I think that why we see so much of this from the Chinese retailers is because oil rigs are what are fetching the biggest bucks in the visible online market for glass, not to mention that it takes less materials to make oil rigs than combustion/vapor pieces.
 

loggerknees

volcano enthusiast
Recently got my knockoff PnWT from sunshine glass on dhgate. Here are some pics of it and how I use it with my volcano solid valve bags. The solid valve mouthpiece fits nicely enough against the 14mm female joint to result in a virtually airtight seal (could probably get a tighter seal with a gasket, but this seems unnecessary because I'm able to easily get enough suction to completely empty the bag.

The piece itself is solid. The internal components are slightly crooked, but this does not seem to affect the performance. If I pull too hard (which is easy to do with the lack of airpath restriction in a volcano bag) I can get a tiny amount of splashback, but the splash guard cuts down on this to the point where I don't find it to be an issue.



 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
yuYnvdJ.jpg


This new rig from Kathy looks pretty sexy.. I'm tempted. Must resist
http://www.dhgate.com/product/2014-newest-colorful-glass-bong-glass-water/210383688.html

Shame only Kathy is selling it - I am almost tempted to purchase from her, but I have heard too many negative things. She won't get my money with her bullshit

@yingmin5 and @sunshinestore - take note - Fuck with any of us, I will stop purchasing. I believe others agree with me.

I have been watching a few new vendors with some interesting pieces, though I haven't seen anything I really want. Can someone recommend a nice rig for the E-Nano - I want/need something with a 14mm male fitting this time around
 

flickyourbic

Well-Known Member
Shame only Kathy is selling it - I am almost tempted to purchase from her, but I have heard too many negative things. She won't get my money with her bullshit

@yingmin5 and @sunshinestore - take note - Fuck with any of us, I will stop purchasing. I believe others agree with me.

I have been watching a few new vendors with some interesting pieces, though I haven't seen anything I really want. Can someone recommend a nice rig for the E-Nano - I want/need something with a 14mm male fitting this time around

I've only done one order with kathy but I was far more impressed with the other three from Sunshine. When I'm choosing I always try to go through sunshine and I've yet to try yingmin5 but hear good things. I've got another piece on the way from sunshine and there were two I wanted to order from kathy but I held off. Seems like they release new stuff every month so I'm going to wait a few weeks before ordering anything else I think.
 

weenstoned

Well-Known Member
2vDYl0a.jpeg
7sCK6m9.jpeg


Just got this piece in the mail from Alina0086
http://www.dhgate.com/product/2014-new-design-tall-10-quot-water-pipe-with/206965439.html

Ordered it for my friend's birthday. A tad janky looking, but overall a decent piece. Probably would have ordered my friend a yq42 but he has a pet tortoise. Only downside it that it came with a clear flower bowl instead of a black one, don't really care though as my buddy is none the wiser. I would say the fritted disc might be a bit nicer than the one in my fritted ashcatcher from Kathy.

I hope someone gets those grav lab recycler copies and posts pics/reviews before they stop being on sale.

Also look like DHGate has another coupon deal now. It says you can win one but I was just given the choice of either 10 bucks off of 100 or 30 bucks off of 280. So I opted for the former as I don't really plan on spending 280 bucks between mid oct and xmas.

Edit:
gcQqLet.jpeg


Figured I would post a size comparison to the D020-D. Definitely like the angle of the mouthpiece on the turtle piece. Also they claim it is 7mm thick glass and they might not be lying, the can is pretty thick. The base is also super wide and would probably be kinda hard to tip.
 
Last edited:

various127

Well-Known Member
@Rachett I've been looking at these two

http://www.dhgate.com/product/new-d...ngs-glass-oil/210170394.html#cart_view-4-null

http://www.dhgate.com/store/product/coin-rig-glass-bongs-glass-oil-dabbers-bear/210275081.html

The first one, I'm not sure if it has a non functioning stemless or if there is some type of diffusion beofre entering the chamber. And I saw a video of the second one(original) and it looks like it would give some pretty nice flavor. Might possibly be too small for the e-nano though


Also, how do you guys feel about the seller drinkware?

http://www.dhgate.com/product/whole...lighter-glass/209479679.html#cart_view-3-null

There's no feedback only one transaction, but it looks like that beaker may be a 14 mm and I want it
 
various127,

MinnBobber

Well-Known Member
HI,
I have a nice bubbler but am looking for a HT hydra tube to use with my new Herbie.
I'd like to find something other than the straight tube design. Is there a HT that will fit with
Ratchett's upcoming adapter that has a mouthpiece off to the side of it?
Can you please post a link.
The straight tube/ bong design looks more cumbersome, compared to a tube with a
side mouthpiece.
I probably could manage the straight tube but I'm betting my wife wold not like it.
A happy wife = a happy life ;)
 

Delta3DStudios

Well-Known Member
Accessory Maker
I don't think you can buy cheap china hydrotubes yet. Your best bet is to get a basic one custom made by either Doughboy Glass or Distilled Glass - They should be able to make you a very nice solid HT for under $200

(Edit, FYI - my Herbie HT adapter has an 18mm male fitting)
 
Top Bottom