Divine Tribe atty's

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
I even asked Matt from ineedhemp if co2 wax would work good with the donut atts and he said yes....
can you explain what it is doing with the Co2 wax? you are using the x6 right? is it on the blue setting ?
is the donut getting red hot?
 
divinetribe,
  • Like
Reactions: cawshook

kernal6500

Well-Known Member
can you explain what it is doing with the Co2 wax? you are using the x6 right? is it on the blue setting ?
is the donut getting red hot?


the c02 wax just bubles up lighly and the donut atty produces little vapor. i went through a half a gram of c02wax in about an 1hour. it was painful. and no my addy does not get red hot. i tried some crumble wax and that is working a little better.

yes the x6 is on blue setting

i just went ahead and purchased a dual cermic coil from you. i hope that one produces more vapor.
 
Last edited:

kernal6500

Well-Known Member
The only positive I have to say about this donut Atty is the taste. It just tastes pure and doesn't burn your lungs. I just wish I could get bigger clouds
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
the c02 wax just bubles up lighly and the donut atty produces little vapor. i went through a half a gram of c02wax in about an 1hour. it was painful. and no my addy does not get red hot. i tried some crumble wax and that is working a little better.

yes the x6 is on blue setting

i just went ahead and purchased a dual cermic coil from you. i hope that one produces more vapor.
i'm going to refund you on the dual rod . message me your last name so i can do that, my goal is to make you happy and i hate to see my stuff waste things that cost a fortune.

matt
 

kernal6500

Well-Known Member
i'm going to refund you on the dual rod . message me your last name so i can do that, my goal is to make you happy and i hate to see my stuff waste things that cost a fortune.

matt

just got the refundthank you so much. you have made me happy. thats what real customer service is all about. i will only be buying attys from you from now on because of that.
hopefully some day the donut atty will work well with c02 and produce major vapor
 

kernal6500

Well-Known Member
so i tested out the ceramic dual coil with some waxman wax and got some major rips. i notice that putting a good amount in will make it splatter to the top. i used a tool to get out the wax and it was a good amount so i dont like that part. i always like to be able to put a good amount of concentrate in my pens so i dont have to be constantly packing more and more in but i guess not with this atty.

overall this atty produced huge vapor and i was very pleased with it, i know how much to pack now s its all good. i did notice putting some wax in the donut atty that the hits weremore tastfull and pure.
 

SameOldTim

Previously Known as 'ThermoCoreTim'
Manufacturer
I have to admit, this has been my "go to vape" when i sample new products. Not for the quantity of vapor but for the taste. What i have done that has helped a bunch getting bigger clouds, which might be that golden ticket for the cloud chasers...... I took some of my Thermovape spare ceramic bits and put them around the doughnut. I believe its just acting as a wick and keeping more product in contact with the doughnut.

Cheers,
Tim
 

kernal6500

Well-Known Member
I have to admit, this has been my "go to vape" when i sample new products. Not for the quantity of vapor but for the taste. What i have done that has helped a bunch getting bigger clouds, which might be that golden ticket for the cloud chasers...... I took some of my Thermovape spare ceramic bits and put them around the doughnut. I believe its just acting as a wick and keeping more product in contact with the doughnut.

Cheers,
Tim

Tim, can you provide a picture please. I have some extra ceramic bits from my luna. did you just drop them in there?
 

rekrab

Well-Known Member
just received my evolved splash cap atomizer and other parts. The first thing i will say it tastes fuckiiing great. big ass clouds to. look back in the bowl and theres still some left. good efficiency compared to chinese shiat. will definitely be following this thread
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
just received my evolved splash cap atomizer and other parts. The first thing i will say it tastes fuckiiing great. big ass clouds to. look back in the bowl and theres still some left. good efficiency compared to chinese shiat. will definitely be following this thread
hey thanks for the great review, but I gotta let you know that I do import these from China, but what makes me a little bit different as I've done some quality control. I filtered through all the shitty parts and really try to find what works. Either way thanks man
 
divinetribe,
  • Like
Reactions: Jared

rekrab

Well-Known Member
Well these are some good Chinese. Anything I've gotten off fastest was garb glad your going that extra Step.
 

rekrab

Well-Known Member
whats the best uses for the pancake coils. i notice they create a lot of heat on the unit, i tried some wax, not huge clouds but still medicated
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
whats the best uses for the pancake coils. i notice they create a lot of heat on the unit, i tried some wax, not huge clouds but still medicated
those are for bubble and kief. the rods work best for wax
thanks
matt
 
divinetribe,

PPN

Volute of Vapor
Hi DT, I'm still enjoying my donut atty, it tastes still good but it's dirty, I'm thinking to clean it with cotton and iso....or maybe I can fire it at 5 or 6 volts to clean the ceramic? sme help would be nice...
 

Dangus

Yeah, well, that's just, like, your opinion, man.
So I ended up frying my x6 battery trying to power a yocan atty(w1 nero)...didn't work out too well...but I picked up the yocan exgo v1 battery and it fires the donut atty *really* nicely. (made for low resistance attys) I prefer it over the x6.

As strange as it is the voltages of that battery are 2.5v, 3.0v and 3.7v...and I really like the donut at 2.5

Have been having some leakage problems with the cart, but fairly minimal...overall it's been a solid atty!

Cheers
 

kernal6500

Well-Known Member
Rebuidable Infused Oil Atomizer with 1.7ohm Dual Silica Rod Coils

would this atty work for concentrated oils like rick simons oil?
 

gvape

Well-Known Member
So I ended up frying my x6 battery trying to power a yocan atty(w1 nero)...didn't work out too well...but I picked up the yocan exgo v1 battery and it fires the donut atty *really* nicely. (made for low resistance attys) I prefer it over the x6.

As strange as it is the voltages of that battery are 2.5v, 3.0v and 3.7v...and I really like the donut at 2.5

Have been having some leakage problems with the cart, but fairly minimal...overall it's been a solid atty!

Cheers


That sucks you fried the x6, only reason I have not been using my nero coil as much is becuase it only works on my mech mods for sub ohm. Looks like that battery would have been a good buy.

Know anywhere else that is selling ego style batteries for sub ohm. Would make me feel way better about using the donut, seeing as its .6 to .7 ohm, you really need that sub ohm battery.
 

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
Hi DT, I'm still enjoying my donut atty, it tastes still good but it's dirty, I'm thinking to clean it with cotton and iso....or maybe I can fire it at 5 or 6 volts to clean the ceramic? sme help would be nice...
My donut is black after 6 months but is still working, i think it will never become white again. like my Ti nail on my glass rig is seems to have a black burnt almost oxidized stain, i can not always afford top shelf dabs so that might play a big part. on the donut as far as the base piece goes just getting it hot and forcing the wax out by blowing through the thread holes at the bottom when the whole piece is warm is a good way to get it clean, i then use a rubbing alcohol wipe to catch anything coming back through the holes.
i do this several times.
 

farscaper

Well-Known Member
@divinetribe ive got an ecom-c variable wattage battery. does up to 10watts. will this work with the 1.7 all ceramic dual coils? im ready to do something here but then I saw the disclaimer... so im trying to figure out if I can. im currently running kanger dual coil heads that are 1.7ish with not much issue. I have been running at 10watts with no trouble on them.

help me out cause im ready for some ceramic action!
 
Top Bottom