Discontinued The Persei Vaporizer for herbs and concentrates.

darkrom

Great Scott!
When you get the unit, you need to take it apart and clean it, make sure its all nice and clean, this gives you a chance to learn the unit.


Fair enough. I took some of it apart, but I'll have to wait until later when I'm feeling more focused. I'll just follow along the youtube video. Didn't look super confusing when i saw it last, and I'm sure its less confusing when its in hand too.
 
darkrom,

530rasta

Well-Known Member
i was thinking of co2 on one ti disc, then top it with the other ti disc and dump more co2 on...??
 
530rasta,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
i was thinking of co2 on one ti disc, then top it with the other ti disc and dump more co2 on...??

Its doable i have a few customers that do that, but you have to make sure the bottom coil is always saturated.

Some capillary action action is at work combined with oils being pulled up when inhaling.

In other words it works just need to switch coils from time to time to vaporize all the oils there.
 
THC SCIENTIFIC,
  • Like
Reactions: 530rasta

Soflo

Only birdshit and fools
I have to say differently. TET Cera needed extra expenses just to work out of the box.

1. Needed to purchase the EO cartridge
2. Batteries
3. Charger
4. Specific oils

Compared to the Persei

1. Cartridges included
2. Batteries included
3. Charger included
4. Oil not included.

Now when you compare the Persei with the EO

Persei + Aw batteries + Charger + Hercules can now be compared with the Cera since you need the same things.

And after this the only 2 differences you will see is.

EO Carts worked only with specific oils, and needed constant returns to company for service.

vs

Hercules Carts work with all oils, and the only service you needed was cleaning.




Thanks for the support.

When I purchased my cera it came with the eo cart, batteries, and charger. You could not order just the body fyi. and I've owned it since the pre release and never had to send in my cart.
 
Soflo,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
When I purchased my cera it came with the eo cart, batteries, and charger. You could not order just the body fyi. and I've owned it since the pre release and never had to send in my cart.

I do apologize, i was under the impression you had the choice to get only the cera and had to purchase the batteries and chargers. If someone else can confirm this was the case that you got a kit when you ordered your cera then ill restate this, because from my recollection you had to choose the options for battery and charger.

But as far as sending in the carts to get cleaned and serviced this was a service offered by them because the need was there. Some people never did send them in true but majority did.
 

Patrick Hughes

Stoneman
I do apologize, i was under the impression you had the choice to get only the cera and had to purchase the batteries and chargers. If someone else can confirm this was the case that you got a kit when you ordered your cera then ill restate this, because from my recollection you had to choose the options for battery and charger.

But as far as sending in the carts to get cleaned and serviced this was a service offered by them because the need was there. Some people never did send them in true but majority did.

my cera came with neither battery or charger. You could pay extra to get both of those things added on but they were not part of the deal. I did not get them from tet.
 

Severmore

Well-Known Member
I do apologize, i was under the impression you had the choice to get only the cera and had to purchase the batteries and chargers. If someone else can confirm this was the case that you got a kit when you ordered your cera then ill restate this, because from my recollection you had to choose the options for battery and charger.

But as far as sending in the carts to get cleaned and serviced this was a service offered by them because the need was there. Some people never did send them in true but majority did.

When I purchased the Cera, you could purchase a vaporizer package that included the recommended batteries and charger...but it was MUCH cheaper to purchase just the vaporizer (body and cart) from TET and batteries and charger elsewhere.

If one purchased the Cera LL for herbs, they would need to purchase an additional EO cart for oils or vice versa.

Get a hold of some subpar oil?...a rebuild is in your future...eventually.
 

PPN

Volute of Vapor
Hi guys, how many hits with the sr-74 the AW imr 18350 could support before charging?

Can I get some tips about batteries cause I already killed my stock batteries and I just received my news AW imr...?
 
PPN,

DieHard

Accessory supplier
Accessory Maker
I would love to see an UpTech booth at this:
Edit :Bonus! The venue is pretty bad ass too.
@THC SCIENTIFIC
UAM7cns.jpg
 
Last edited:

kindbeats

Terps Up, Temps Down
Hi guys, how many hits with the sr-74 the AW imr 18350 could support before charging?

Can I get some tips about batteries cause I already killed my stock batteries and I just received my news AW imr...?

I know you hear it all of the time, but there really is no way to determine how many hits the average person gets per battery load, because everyone has different habits and tolerances. What some people would call lung busting rips might be laughably small hits to others.
 

FlyingLow

Team NO SLEEP!
LOL!

Soooooo, I will be honest that I am a little hesitant. It will be a few weeks [maybe a month] before I have the funds, should I wait for the new 8 Oil to be released or will the Persei maintain its place as the top model in your line-up?
 
FlyingLow,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
LOL!

Soooooo, I will be honest that I am a little hesitant. It will be a few weeks [maybe a month] before I have the funds, should I wait for the new 8 Oil to be released or will the Persei maintain its place as the top model in your line-up?

Wait for the 8 if you really want to go advanced.

No matter what I'm still here
 

FlyingLow

Team NO SLEEP!
Much appreciated!
Simple and direct, exactly what I needed to hear.:rockon:
I could not find a dedicated thread for the 8, is most information being discussed in here?
 
FlyingLow,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
imag plus herb vaporizers have been shipped today, so once we get them in you can get one for $80 after using the coupon code uptech. It should be here early next week.
 
THC SCIENTIFIC,
  • Like
Reactions: OB

Fredster951

Well-Known Member
imag plus herb vaporizers have been shipped today, so once we get them in you can get one for $80 after using the coupon code uptech. It should be here early next week.
Can you provide us with more info on this device ? Looking to buy one but not sure what I am really buying. Thanks.
 
Fredster951,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Can you provide us with more info on this device ? Looking to buy one but not sure what I am really buying. Thanks.

Yes well update the info.

Its basically a conduction vaporizer, 2200 mah 18650, pass through ability, lasts about 5-8 sessions depending on how long a session is, and three temp settings 190c, 210c and 230c. I think the 230 is for oils but doubt it can match the Herc.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@THC SCIENTIFIC Is the hammer top still shipping w/o the ceramic rod? I've been interested in one for some time now (for traditional dabbing) but seems like the rods have been out of stock for months.

hammer tops are shipping without the rods, the new rods will be done soon, but they will not be included it the hammer tops anymore.

What this means the hammer tops are being phased out, and the functionality is going to be added to the new Persei tops we are working on.
 

elmoe420

Well-Known Member
hammer tops are shipping without the rods, the new rods will be done soon, but they will not be included it the hammer tops anymore.

What this means the hammer tops are being phased out, and the functionality is going to be added to the new Persei tops we are working on.

Any ETA on the new rods and/or the v4 Persei tops?
 
elmoe420,
Top Bottom