• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Da Buddha

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
Gently take off the heater cover, gently pull up the ceramic heating rod, and then put the heater cover back on. The ceramic rod should almost touch the top of the heater cover. It should then work perfectly.
I CAN do this?! w out sending it back to em or whatever?!?(if i dont break it?) hah oh ty, i hope this works! i LOVE this site! thanks for the info and ill let u know if i get it.. :uhoh: im sorry, is there an easy way to get it on and off and to pull up on the rod?? thanks..
 
budz and bhombs,

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
This is done frequently. I gently twist the heater cover back and forth while pulling up at the same time. The ceramic rod should pull up relatively easy.
ok, i got the heater cover off, now i notice when i slowly pull up on the roc, it feels as if its on a spring loaded something... kinda wants to go back down a lil.. guess jus mess w it till it looks bout rite?

that sring loaded crap or whatever it is doesnt mean nothin?! it should still work good? ive noticed it goes up a littttle bit each time, but also notice it wants to go back down, like its being pulled a little or somethin.. i dunno but thanks for ur help.. hope this works. w out u i woulda been pissed blowing up the company
 
Last edited by a moderator:
budz and bhombs,
  • Like
Reactions: mwahle1

mwahle1

Well-Known Member
I have never needed to open up the bottom of the unit, so I am not sure what is attached to the bottom of the ceramic rod, but I would assume just wiring. Maybe someone like Vitolo could chime in. Although, you should be able to raise the ceramic rod high enough in order for the unit to work as advertised. I know of multiple people that have done this in the past.
 

mwahle1

Well-Known Member
I hope it works for you. I have had my Buddha for almost 3 years and it works as well as the first time I got it. Note: it did take me a week or so to perfect my technique. So do not get discouraged if you are not getting clouds of vapor your first few attempts.
 

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
Update- that WAS the problem! got it fixed being very careful and the thing hits like a CHAMP now! thanks again @mwahle1. its a lil weird bc it almost wants to get pulled back down, like its spring loaded or something, put it eventually goes up lil by lil and i got it to near the top ot the heater cover and its RIPPING! :leaf::drool:

Update- that WAS the problem! got it fixed being very careful and the thing hits like a CHAMP now! thanks again @mwahle1. its a lil weird bc it almost wants to get pulled back down, like its spring loaded or something, put it eventually goes up lil by lil and i got it to near the top ot the heater cover and its RIPPING! :leaf::drool:
sry, but im kinda not gettin this.. i even wayched a utube vid on a dude who took apart the whole heater cover, rod thing to show u how to clean good but that was w a ssv. the ONLY difference of course, was that in my da buddha, i swear the rod aseems to be lik spring loaded.It just DOES NOT WANT TO STAY UP THERE HIGH IN THE glass slleve cover.. im wondering y its like this anyways, the rod i mean, bc the other dudes ssv rod was jus sittin there, not spring loaded or whatever is it that wants to keep pulling it down. the best i can get the rod to is about 2-3cm from the top of heater cover.. itll work when i vape.. i use just as much herb tho as when combusting bt's, but thats fine w me. its a different high, and i like it and other ways to get ya medicated. ANYWAYS, if ANY1 has any info on this "spring loaded rod type in da buddha, and can chime in, id appreciate it. thatnks guys. oh yea, and w it where i got it now, as high as i could get the rod,about 2-3 cm from top of glass cover, ill get some decent vapor at about 1 o clock ive seen seems to be best as of now,,, but might jus take ma while, but im not gettin crazy hits, like a bunch of em, or like REALLY stretching my buds, but thars ok. i just wanted a vape. and if i won da buddha from a site, but it came straight from the 7th floor gang, it should be under warranty right?! w my unit, i got a business card signed and dated by a few guys who did the certain work on the certain parts of my vape.. i got that, but no ACTUAL reciept bc i won it, but just bc i won it, shouldnt mean thw warranty isnt good right?! sorry for babbling on, i just want to learn as much as possible when using em. i like to know what im doing/ know my PIECES! :) i feel soo lucky to have won this badboy but i thought b4 getting it, my material would be lasting WAAY longer, but sooooo far atleast, im smokin the same as if i was packin bt's! hey, its not more tho. the same if anything! and ONE more question guys. whats the best thing to do w the after vaped herb?whats it called and y?! i heard u can make brownies/ cookies? jus curious, bc if so. ill prob do so! thanks soo much guys :chill::smug:
 
Last edited by a moderator:

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
if the rods up there, but not touching, it should be fin right?! id sayMAAAYBE my pinky could fit inbetween the top and the top of the rod. thats a cool height?! sry, just making sure i get the best use eventually when i get "the" technique down. i figured its mostly that now. i hope that i got i high up enough bc the rod on da buddha wants to get pulled back down which i guess would make since if they were really long, but there not! lol but hopin its in a good spot! and im just on the learning curve now :shrug::uhoh:
 
budz and bhombs,

mwahle1

Well-Known Member
In my opinion, the higher the rod the better (more heat = longer contact of cool air to hot rod). Mine is positioned just millimeters from the top of the heater cover. If you are getting good vapor and your ABV is at least dark brown, it should be good enough.
 
mwahle1,

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
In my opinion, the higher the rod the better (more heat = longer contact of cool air to hot rod). Mine is positioned just millimeters from the top of the heater cover. If you are getting good vapor and your ABV is at least dark brown, it should be good enough.
mines up there, and i cant get it too stay up any higher with out wanting to get pulled back down, if i were to guess exactly, its prob 3-4mm from the top of the heater cover, that seem ok? and the last 2 times ive vaped, i keep it at about 130-200 o clock and the abv will look like tobacco pretty much by the end, and ive noticed stiring every iht makes each 1 HUGE... im gett ing FAT rips, i just am not saving a whole lot of material like ppl say they do, but i guess thats all to do w ur tolerance.. and i like to vape/smoke/dab a lot :tup:
 
budz and bhombs,
  • Like
Reactions: mwahle1

ataxian

PALE BLUE DOT
you can gently twist also as you lift..(and push back down) you must be gentle, but if wire is "hung up" on something you will free it.
The 3 vaporizers the 7th floor make is the LSV, Silver Surfer, Da Buddha, right?

Do they all have the same heating element?

If so I think Da Buddha would be perfect for water rigging with silicone tubing?

What do you say?
 

KidFated.

Unknown Member
The 3 vaporizers the 7th floor make is the LSV, Silver Surfer, Da Buddha, right?

Do they all have the same heating element?

If so I think Da Buddha would be perfect for water rigging with silicone tubing?

What do you say?
That's what I did, I'd go the LSV route if water was my main thang however.. And yes those are the 3, super surfer to come soon
 
KidFated.,
  • Like
Reactions: ataxian

KidFated.

Unknown Member
I had a LSV and it's a very good vaporizer.
I'm a light weight and it was too powerful for me.
Others might find it perfect!
DA BUDDHA SEEMS EASIER TO USE?
It was my first desktop and it knocked my ass out.. Now I'm all about my log vapes, I need a vapolution though. Dbv is a VERY good vaporizer for any level of vaporist
 

ataxian

PALE BLUE DOT
It was my first desktop and it knocked my ass out.. Now I'm all about my log vapes, I need a vapolution though. Dbv is a VERY good vaporizer for any level of vaporist
Log vaporizers pair with water! 100%
The smaller the better!
The VAP2 is more for flavor chasing!
DA BUDDHA I thought was for effect?
Plus it's super cheap!
 

Ryski

Well-Known Member
I have 2 questions.
My sessions tend to last a very long time. I like to have a hit or 2 then stop. 10 min later I'll have another hit or 2 and so on. My first question is what do you people do with the whip when you still have material in the whip. I saw one guy a while back built a clip for the dbv but I'm not that talented.

My seconds question is for all you people with many vaporizers. Why ???
I'm new here and I'm thinking of getting a solo as a 2nd vape for outdoors but I don't get why anyone would want more than 2. Are the other 5 or more useless ?? Is there that big a difference between the type of use you get out of it??? I don't understand why so many here have such a bad (good?) case of VAS.
 
Ryski,

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
I have 2 questions.
My sessions tend to last a very long time. I like to have a hit or 2 then stop. 10 min later I'll have another hit or 2 and so on. My first question is what do you people do with the whip when you still have material in the whip. I saw one guy a while back built a clip for the dbv but I'm not that talented.

My seconds question is for all you people with many vaporizers. Why ???
I'm new here and I'm thinking of getting a solo as a 2nd vape for outdoors but I don't get why anyone would want more than 2. Are the other 5 or more useless ?? Is there that big a difference between the type of use you get out of it??? I don't understand why so many here have such a bad (good?) case of VAS.
mine vapes fast put fat clouds..how much do u pck? i pack half a bowl in the whip, and while get like 4 fat rips.. seems like other get more then me..
 
budz and bhombs,

TeeJay1952

Well-Known Member
I placed the 3M hooks around coffee table edge and string whip on those. I have E nano on one hooked to extension. The controller is easily available and not banged around.
Why multiple vapes? Do you have a tool chest? Many different tools for different jobs but many do same work . (pliers, monkey wrench and so forth)
Me I have no problem seeing Buddha as party vape. Nano for daily. NO2 for at computer. Everyone serves a different purpose.

If you patiently sit and stir you can get 20 hits from a bowl. Start low 11 on dial. 5 wispy hit full of flavor. Turn to 12:30 and get a dozen hotter steamier hits. Finally to 1:30 and 5 more knockout heavy hits before that ole popcorn taste.
 
Last edited:

Ryski

Well-Known Member
I pack 1/3 of bowl and usually set just past 12:00. Don't know how many hits I get but 10+ for sure. I keep hitting it til I get no vapor then turn to almost 2:00 for a couple more hits. Then again I don't mind the popcorn taste (doesn't everybody love popcorn).
I placed the 3M hooks around coffee table edge and string whip on those. I have E nano on one hooked to extension. The controller is easily available and not banged around.

Why multiple vapes? Do you have a tool chest? Many different tools for different jobs but many do same work . (pliers, monkey wrench and so forth)
Me I have no problem seeing Buddha as party vape. Nano for daily. NO2 for at computer. Everyone serves a different purpose.
.

Different jobs??? There's only 1 job, get medicated. Ok that I get 3 vapes makes sense to me but many people list off the vapes they have and some people have 10+ that's what I don't get. To me (to use your tool chest analogy) it's like having 10 hammers.
 

TeeJay1952

Well-Known Member
@Ryski Some folks have a junk drawer with a couple tools other have a Master craft Tool set with 300 pieces. People have different interests. You asked for explanation, didn't like reasoning and tossed conclusion.
I found vaping to be of such a difference in amount, quality, attitude that I want to make sure I am not missing out on something ELSE and want to stay abreast of new developments. I had not heard of wax or concentrates till this year. One of my favorite sayings is : You don't know what you don't know, till you know it. Medical usage may be considerably different to daily stoners but look the same from a distance to an outsider.
 

Vitolo

Vaporist
Different jobs??? There's only 1 job, get medicated. Ok that I get 3 vapes makes sense to me but many people list off the vapes they have and some people have 10+ that's what I don't get. To me (to use your tool chest analogy) it's like having 10 hammers.
Faulty analogy.... but it is OK.. at least you admit that...
....that's what I don't get.
I DO happen to have 12 hammers in my tool cabinet.
10+ Vapes....?
I have approximately 50 vapes, and use about 25 of them regularly.
...Medical usage may be considerably different to daily stoners but look the same from a distance to an outsider.
Amen
 
Last edited:

budz and bhombs

DAB SPECIALIST/ POKER GRINDER
I pack 1/3 of bowl and usually set just past 12:00. Don't know how many hits I get but 10+ for sure. I keep hitting it til I get no vapor then turn to almost 2:00 for a couple more hits. Then again I don't mind the popcorn taste (doesn't everybody love popcorn).


Different jobs??? There's only 1 job, get medicated. Ok that I get 3 vapes makes sense to me but many people list off the vapes they have and some people have 10+ that's what I don't get. To me (to use your tool chest analogy) it's like having 10 hammers.
for sure.. see, i can understand like maybe upto 5ish, i dunno, for diff uses. im PERFECTLY SET w Da Buddha for at home, 2 globe wax pens for on the go, just bc we all know pens blow fo sho, waste of dough, and thats no jooooke! lol but really, i LOOOOVE globe pen wax vapes, have an o-phos w kiss globe, LOVE, and a vision 1300mah vv w a Vaped globe and a mini protank 3, also nice! but literally, i guess unless i was a SUPER VAPORIZER and thats all i did, id prob pick up a portable HERB vape, and maybe 1 more for at home but after that, POINTLESS i feel... thats plenty. i know a lot of ppl oon here dont like hearing this, but i still like to use my bong here and there for a bt snapper every now and then. Dab the most, starting to vape herb 2nd most, bts/pipe bowls/joints 3rd most, then vaping my concentrates out of one of my 2 pen setups would be 4th, not bc it doesnt do the job or they suck, i LOVE em, hit FAT clouds! but i try to keep my use down a LITTLE more on those bc there so PRECIOUS! lol mostly on the go use..
 
budz and bhombs,
Top Bottom