Doughboy Glass

Status
Not open for further replies.
This tube is the answer!! You really do get better effects and the vortex cools the vapor in an awesome way. Some pieces will scrub the vapor in different ways which remove more active ingredients than others
 

kimura

Well-Known Member
you're still ingesting the same amount of active ingredients.

Are you sure about that claim though? I always use a few drops of cranberry extract mixed into the water, and I find that this makes it very difficult for vapor to stick to any part of the glass that gets exposed to water. With so much water in this piece and therefore so little dry surface area for vapor to stick to, I wonder if fewer active ingredients are being "claimed" by the tube?

It made my eyes super red to the point that my wife was laughing at me, which doesn't normally happen!

It could very well be placebo but I'm not going to jump to that conclusion. And as I have been informed by several medical professionals, the placebo effect is a very real effect!

Whatever is going on here is highly enjoyable
 

Roth

Pining for the Mountains
And as I have been informed by several medical professionals, the placebo effect is a very real effect!

Agreed wholeheartedly (that's a weird word to spell!).


True, if you don't use cranberry extract, and tend to have reclaim build up, you are temporarily losing out on some of the actives. However, if sounds like you were using cranberry extract before, so reclaim wasn't really an issue either before or now.


I guess just count me as a skeptic on different glass getting people higher. Doesn't matter either way though.

The important thing is you have some sick glass and kick ass vapes. Trey really is pumping out some fine work, excited to see some of what he comes up with next.

Sorry for the derail, let's load an ELB together :science:
 

kimura

Well-Known Member
Roth said:
Sorry for the derail, let's load an ELB together :science:

No worries! I remain skeptical as well when it comes to one piece of glass delivering "better" effects than another, but I'm not ruling it out. this analysis is probably over my head anyway.

Fresh ELB coming right up
 

kimura

Well-Known Member
good morning! unfortunately I have a policy against taking monster EVO rips through badass custom glass in the morning, especially on workdays. but at least I have that to look forward to when the sun goes down and the work is done.

the klein recyclo-tube is the coolest piece of glass I have ever owned
 
Kimura you hit it dead on brother. I just want to share this kind of joy. I've already decided what my next piece will be when I get another one. And it'll be another one of these!
 
Cannabis Connoisseur,
Sorry for back to back post please mod,
Here's my HydraKlein!! The writing on it is another type of glass called Amber Purple. He wrote it on there with a Glass Rod, then annealed it to get the color too come out. The color changes depends on the lighting its in. On most of these the color is an Amber Honey Color. On the last it shows the purple from dark to light. The writing on it is raised like a branded tattoo. Better Pics to come
3fFX7e.jpg


Nke1gV.jpg

8VUALI.jpg

kXPEif.jpg

zVo8Dg.jpg

EcVzU4.jpg


mod note: No need to apologize for back to back posts when the edit time (6 hrs.) has expired.
 

NightTrain

Well-Known Member
Sorry for back to back post please mod,
Here's my HydraKlein!! The writing on it is another type of glass called Amber Purple. He wrote it on there with a Glass Rod, then annealed it to get the color too come out. The color changes depends on the lighting its in. On most of these the color is an Amber Honey Color. On the last it shows the purple from dark to light. The writing on it is raised like a branded tattoo. Better Pics to come
3fFX7e.jpg


Nke1gV.jpg

8VUALI.jpg

kXPEif.jpg

zVo8Dg.jpg

EcVzU4.jpg
Damn bro, that piece is sick, can't wait to get mine. Also, if that's your car under that cover I like your style! I'm a huge Trans Am fan, I own one myself.
 
Last edited:

Tstat

Dead Foot Designs
Accessory Maker
Well, I'm back from Lockn' and actually have some cash left! I'm ready to order a recycler, but not sure what to ask for. Can you guys help me out with suggestions, or post pics of the rigs you bought? Im psyched to get ordering and I think I like the colored recycler type. What kind of colors does he work with? Mouthpiece types? Any added info will be greatly appreciated
 
Well, I'm back from Lockn' and actually have some cash left! I'm ready to order a recycler, but not sure what to ask for. Can you guys help me out with suggestions, or post pics of the rigs you bought? Im psyched to get ordering and I think I like the colored recycler type. What kind of colors does he work with? Mouthpiece types? Any added info will be greatly appreciated
P.M Poopmachine there have been restrictions put on his account. He may not be able to help us any longer if they don't reapprove his account
 

Roth

Pining for the Mountains
P.M Poopmachine there have been restrictions put on his account. He may not be able to help us any longer if they don't reapprove his account

Hopefully that all gets sorted out. I understand if PM was making money off it, but he's not. He's helping others and Trey out of kindness.


mod note: Representing a commercial poster makes you one too. We don't investigate or even consider financial arrangements.
 
Hopefully that all gets sorted out. I understand if PM was making money off it, but he's not. He's helping others and Trey out of kindness.
I don't know the particulars but some of us believe him when he says he is not making money off it. It seems others may not believe him or maybe he stepped on some toes. All I know is he gave me an awesome glass blower to work with and one who is affordable without the ego prices. I guess being a middleman is against forum rules.


mod note: Discussing staff decisions is also against forum rules. Public discussions of staff decisions are not permitted on the site.
 

Delta3DStudios

Well-Known Member
Accessory Maker
No, this site has strict rules about selling to other members. Given the subject of this site, I think the rules are more than fair. In fact, I was suspended simply for talking about sharing my 3D models with everyone when I first signed up with this site (I had not sold anything, nor did I actually have a store at that time).

I'm sure PM will get it sorted out with VTAC soon enough.
 

Tstat

Dead Foot Designs
Accessory Maker
Well, since nobody gave me any suggestions or pics of their rigs, I just went ahead and got the ball rolling. I'm going with a regular recycler with lots of color and an 18mm female joint :)
 

CrazyDiamond

Crosseyed & Painless
I see my post was edited and some have been removed. Ok, I understand...I did read the rules and didn't think anything I put down was illegal.
I really like what I've seen so far from Trey. Everything that has been posted has been positive as to functionality, look and some other things I dare not mention. I still have one in the works that I think we look really cool...time will tell.
 
CrazyDiamond,
  • Like
Reactions: BoogerMan

syrupy

Authorized Buyer
I really like the scientific work, but IMO the lettering looks so out of place and not very aesthetic.

That Klein looks like it functions well!

Letting is SO HARD to do by hand. I usually only like sandblasted words on scientific work because of that.

That said, the amber lettering has a cool oily-drippy vibe to it that works with this piece.
 

FlyingLow

Team NO SLEEP!
I know it is damn near impossible to write on a curved surface, he has done as well as can be expected on the writing, it is just not for me and IMO takes away from the clean lines and aesthetics of a scientific piece
 
FlyingLow,
  • Like
Reactions: mestizo

syrupy

Authorized Buyer
I know it is damn near impossible to write on a curved surface, he has done as well as can be expected on the writing, it is just not for me and IMO takes away from the clean lines and aesthetics of a scientific piece

Man, usually I would post those EXACT words. But I like how bold the lettering is. Like @ataxian says, do what you like.


....



.....

3270400_700b.jpg
 
Status
Not open for further replies.
Top Bottom