Discontinued The Persei Vaporizer for herbs and concentrates.

ED421

ED421

Well-Known Member
I know that the number of loops affects the power of the KISS carts but my impression from other people (Sleeping in CA maybe?) was that the two different voltages required different gages of wire. I bought rebuild kits from Sleeping and they were definitely different gages for the different voltages.
 
Patrick Hughes

Patrick Hughes

Stoneman
ED421 said:
I know that the number of loops affects the power of the KISS carts but my impression from other people (Sleeping in CA maybe?) was that the two different voltages required different gages of wire. I bought rebuild kits from Sleeping and they were definitely different gages for the different voltages.
Click to expand...
Yeah bro, thicker wire has less resistance because the electricity is traveling through a bigger channel - its like using a garden hose and a fire hose to move the same amount of water. So for lower ohm count you can use less wraps, use a lower number guage of wire (thicker) or do both.
 
ED421

ED421

Well-Known Member
Patrick Hughes said:
Yeah bro, thicker wire has less resistance because the electricity is traveling through a bigger channel - its like using a garden hose and a fire hose to move the same amount of water. So for lower ohm count you can use less wraps, use a lower number guage of wire (thicker) or do both.
Click to expand...

Exactly. I'm trying to figure out what the W9 rebuilt kit comes with. Does it have wire for 3.7v or 7.4v or both? I guess this question is really for G.
 
ED421,
DieHard

DieHard

Accessory supplier
Accessory Maker
ED421 said:
Exactly. I'm trying to figure out what the W9 rebuilt kit comes with. Does it have wire for 3.7v or 7.4v or both? I guess this question is really for G.
Click to expand...
I have made coils that will work on either voltage with the same wire. You need a meter to check the resistance. You can achieve the proper resistance by varying either the number of wraps and/or the diameter of the wick.
 
Mr Mellish

Mr Mellish

Well-Known Member
Might be too early but my first impression is very positive. First, the thing has never touched herb, so the odor is negligible. Second, it's on demand, as compared to the PnP, where you're committing to a 3-4 minute heat up and then you have to keep going...two seconds and then a slow inhale is an awesome and product friendly alternative. Third, as opposed to wax in cotton for the PnP/bullet, I can see how close I am to killing the load. Fourth, it doesn't get hot as hell, like the PnP. Fifth, it feels far more solid than the PnP. Sixth, no cotton necessary. Seventh, it seems to last longer.

This thing is closer to the MFLB than the PnP in terms of stealth. It would probably pass my patented Xbox test!

Looking forward to trying out the Herc.
 
Mr Mellish,
  • Like
Reactions: DieHard
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Mr Mellish said:
Might be too early but my first impression is very positive. First, the thing has never touched herb, so the odor is negligible. Second, it's on demand, as compared to the PnP, where you're committing to a 3-4 minute heat up and then you have to keep going...two seconds and then a slow inhale is an awesome and product friendly alternative. Third, as opposed to wax in cotton for the PnP/bullet, I can see how close I am to killing the load. Fourth, it doesn't get hot as hell, like the PnP. Fifth, it feels far more solid than the PnP. Sixth, no cotton necessary. Seventh, it seems to last longer.

This thing is closer to the MFLB than the PnP in terms of stealth. It would probably pass my patented Xbox test!

Looking forward to trying out the Herc.
Click to expand...

What are we talking about?
 
THC SCIENTIFIC,
  • Like
Reactions: DieHard
OB

OB

Well-Known Member
output_zpsknifc3we.jpg


Can't wait for those rebuild kits
 
P

plasticjesus

New Member
THC SCIENTIFIC said:
are you using the black rod? or white rod with the 18650 3.7v?

and what is the battery voltage of the overcharged batteries? and how did you come to the conclusion the batteries are over charged?.
Click to expand...

Im using the 3.7v rod. Im pretty certain I overcharged them, i put them in my persei an it started smoking and clicking, ended up buying the hammer top.

EDIT: Replaced the coil today (old one had been sort of stretched out) for the first time. Pretty sure this has fixed drip issues. Also taking less time to form vapor. Maybe I just need to spend some more time with this thing.
 
Last edited:
plasticjesus,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Severmore said:
Good eye....interesting indeed!
Click to expand...

the imag plus is one of many we will carry, it is simply an herb vaporizer. We will not be rebranding them, or carry anything that was a stolen design.

The Imag itself is based on our universe cartridge system and this is why we have decided to carry it.
 
Fredster951

Fredster951

Well-Known Member
THC SCIENTIFIC said:
the imag plus is one of many we will carry, it is simply an herb vaporizer. We will not be rebranding them, or carry anything that was a stolen design.

The Imag itself is based on our universe cartridge system and this is why we have decided to carry it.
Click to expand...
Nice!! This device actually vapes dry herbs? Not a e-pipe? Very interesting. Need more info! Lol
 
Fredster951,
Severmore

Severmore

Well-Known Member
THC SCIENTIFIC said:
the imag plus is one of many we will carry, it is simply an herb vaporizer. We will not be rebranding them, or carry anything that was a stolen design.

The Imag itself is based on our universe cartridge system and this is why we have decided to carry it.
Click to expand...
I'd imagine you guys at w9tech are happy with its performance?
 
Severmore,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Severmore said:
I'd imagine you guys at w9tech are happy with its performance?
Click to expand...

it does the job, but would not say it is the best. Compared to the other re-brands it holds its own if not better minus the crazy prices for brand names.
 
THC SCIENTIFIC,
Fredster951

Fredster951

Well-Known Member
THC SCIENTIFIC said:
it does the job, but would not say it is the best. Compared to the other re-brands it holds its own if not better minus the crazy prices for brand names.
Click to expand...
I am assuming The Bender is still the best herb vaping device from w9? Or will this IMAG + outperform a Bender?
 
Fredster951,
OB

OB

Well-Known Member
But have you seen the imag junior?
Screenshot_2014-09-09-11-00-37_zpspgnokp49.png

Out perform the bender I doubt. Not break in ur pocket, or break ur wallet maybe....
 
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Severmore said:
I'd rather hold out for a loose leaf attachment for the 8...if something like that is in the works =)
Click to expand...

The issue with that is no precise temperature control, yes we do have things in the testing phase, but as far as it being a perfect herb vape, that its not.

Fredster951 said:
I am assuming The Bender is still the best herb vaping device from w9? Or will this IMAG + outperform a Bender?
Click to expand...

Such Heresy deserves 1000 lashes.

Pfft

Nothing beats the Bender.


@OB

We have one coming for testing, the junior has the heating element in direct contact with the herbs they say. Doubt it will pass inspection for this reason we shall see.
 
You must log in or register to reply here.
Top Bottom