Cheap High Quality Bubbler

E

exit

Well-Known Member
IMO it is a good idea to get a female-female adapter for a lot of these chinese pieces. Maybe it's just my water amount preference but I find with some of my pieces like the D020-2-W the water goes up the downstem part pretty far, so i like having the extra clearance imo.

i can't speak for other pieces obv since i only have the D0202W and the D022
 
Tweak

Tweak

T\/\/34|<
Where there's a will there's a way.

14mm f/f adapter to Silicone hose + SSV


Has a nice little purr. Not much of a chug like I had imagined. Can't wait to put the nano on top, I think they will pair well being so small.

The top worked piece w/ the tye dye swirl that is attached to the mouthpiece acts as a splash guard of sorts. If you have too much water/pull too hard it will flow into this piece and stay out of the chamber. Neat. If only it was connected at the bottom it would recycle.
 
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
O Kathy...why you gotta tempt me...

big-size-recycler-glass-bong-with-bowl-and.jpg

http://www.dhgate.com/store/product/big-size-recycler-glass-bong-with-bowl-and/205738339.html

2014-new-two-function-recycle-glass-water.jpg

http://www.dhgate.com/store/product/2014-new-two-function-recycle-glass-water/205740281.html
 
jambandphan03

jambandphan03

in flavor country
yeah, I had to stop for a while too, but we have been having a lot of fun using the various pieces I do have. Some have traveled around with me to fest and some stay put away most of the time, but there is a lot of rotation and it's nice to have so many choices for sure. I feel I have a pretty well rounded cheap glass collection now so I haven't felt any urges to buy more, at least until some of these pieces start to die. They all seem to be holding up much better than I originally anticipated.
 
BoogerMan

BoogerMan

Well-Known Member
Dangus said:
O Kathy...why you gotta tempt me...

big-size-recycler-glass-bong-with-bowl-and.jpg

http://www.dhgate.com/store/product/big-size-recycler-glass-bong-with-bowl-and/205738339.html

2014-new-two-function-recycle-glass-water.jpg

http://www.dhgate.com/store/product/2014-new-two-function-recycle-glass-water/205740281.html
Click to expand...
The first one looks like it might be good. I feel like prices are going up :( this piece should only be $30ish IMO. Maybe you could get a few dollars off without the TI nail. Hard to tell if there will be any splash back. Water levels will have to be kept low.

The second one, the recycler, may have issues with bubbles coming up the return tube because the perc looks to low. I wished the manufactures would understand the perc needs to be above the return tube. Halfway up the can for safety would be perfect!
 
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
ataxian said:
You have a lot of pieces!

I had to stop buying stuff!
Click to expand...

Yea, once the next 2 come in the mail I'll be sitting at 10 pieces acquired since Lev re-wet my GAS with the FC lattice awhile back (a bit over a year now?)...the wife is not impressed. LOL

I certainly don't buy every piece I post up about though...just in the habit of seeing what's new on DHG.

My signature is lacking a bit...might have to revamp it at some point...

Cheers!
 
HSIHP

HSIHP

Well-Known Member
Hey @ataxian, do you get any blow back form that piece of the right (the blue honeycomb) when you use it with your nano?

I have the 187 but I find I use it less often because of the huge amount of blowback I get when I finish my draw.
 
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
HSIHP said:
Hey @ataxian, do you get any blow back form that piece of the right (the blue honeycomb) when you use it with your nano?

I have the 187 but I find I use it less often because of the huge amount of blowback I get when I finish my draw.
Click to expand...

I get blowback on ever piece i own - I use a claisen for everything, and have a custom order for a carb'd GonG stem from @VaPeD&CoNfUsEd
 
ataxian

ataxian

PALE BLUE DOT
HSIHP said:
Hey @ataxian, do you get any blow back form that piece of the right (the blue honeycomb) when you use it with your nano?

I have the 187 but I find I use it less often because of the huge amount of blowback I get when I finish my draw.
Click to expand...
I keep the H2O to the low side of the perc's.
Blow Back otherwise.
I increase the end to a 18mm gong with a 18mm x 18mm female.
14mm x 18mm male for the transition.
This set up works very well.
SOLO = 4
NANO = 7

In terms of level of temperature with this setup!
PXo0zGk.jpg
 
Last edited:
blankrider

blankrider

Well-Known Member
As stated by @BoogerMan that recycler will not function correctly with the perc at that height. The perc must be above the return or the bubbles will travel up the return.

The price of that single barrel is a bit high but it does look like quality glass. That tight cleanly made triple donut mouthpiece is really nice and the perc slits appear to be flame polished.

About blow back:
I have used many many pieces and pretty much every one has blow back. I have tried many of the most popular pieces in this thread and it may be hard for some of you to believe but the all time best vape piece I have found is the igloo rig from Alina. It has a wide base and low center of gravity. It has tremendous flavor. It is compact yet not to small and sidecar mouthpiece keeps the vaporizer a reasonable distance from your face. And it has like zero blow back. The function of this one far exceeds the almost forty dollar price tag
http://www.dhgate.com/store/product/hot-sale-new-design-two-function-concentrate/200326170.html
1.0x0.jpg
 
thatguy512

thatguy512

New Member
what do y'all mean by blowback? is it when the vapor, try's to escape the from the bowl while trying to clear the vape, I guess with whip style vapes i don't notice this. but please correct me if I'm wrong.
 
thatguy512,
  • Like
Reactions: ou812?
ou812?

ou812?

Well-Known Member
any one get the Kathy recylcer yet? Mine is in the big apple as we speak. I saw her newer models, gonna pass,save'n them bucks for a Distilled rig. Saw a 14 " version of one of the guys had him blow, massive vortex chamber, thick ,well done Distilled!! Gots to have me a real recycler that he builds, as one here posted, the imports that are recyclers are psuedo and defined more as a splash guard.I cant comment on it, never had a recycler nor any of the import versions either, I guess we shall see how this ratchett type recycler version works. Alritey then, if any members get em in the nxt few, let us know, and I wish I wasnt a nitwit and could eventually make a function vid:disgust:
 
Dangus

Dangus

Yeah, well, that's just, like, your opinion, man.
ou812? said:
any one get the Kathy recylcer yet? Mine is in the big apple as we speak.
Click to expand...

Mine passed through Chicago yesterday, usually 3-4 more days from there...guessing Saturday or Monday...I'll do my best to get a function video ASAP

Cheers!
 
E

exit

Well-Known Member
Bat Norman said:
Just joined the D020 club.
VtxLRyD.jpg

Another happy customer.

Would also like take this opportunity to thank everyone involved with this thread, one of the most informative and addictive threads on FC.
Click to expand...

Good call, d022 is my preferred match for my SSV.
 
exit,
You must log in or register to reply here.
Top Bottom