Discontinued The Persei Vaporizer for herbs and concentrates.

DaNi_DuB

Vapor Enthusiast
To bad the persei runs its cartridges to fast.

I think you mean too bad it allows some opportunities for user error, which in turn allows the user to unexpectedly burn out "lower end" (feel bad calling it that) cartidges.

I get how the hammer works with the bender, but I've seen people saying it works great with the herc. How does that work? I don't have either one, but I've been looking into the both and don't seem to get how they work together.

Also I was wondering if I could get the hammer, the core, and the herc as a desktop (or car) unit? Am I missing anything I need there? Otherwise I was thinking of getting the Omicron v2 on sale for $50. Just not ready to drop $170 on a persei yet.

The hammer top used to come with a rod (called the hammer rod) intended for use with the bender. The hammer top is what people using the herc are referring to. To answer your question tho, the hammer top has circuit protection so a hammer top + core + herc should be a perfect match.

PERSEI doesn't cost $170, lol.

http://www.w9tech.com/persei-ti-series-essential-oil-vaporizer/

Well, don't you seem silly?
 
Last edited by a moderator:

bdmonkeyj3w

Well-Known Member
You could have a persei for 80... ss kit and hammer top on sale... i woulda done that from scratch if i didnt have a friend. He couldnt figure out the basic cart configuration and was wondering how a standard imr couldnt power 5 ohm cart at 3.7 volts. I tried to explain, he said he was frustrated, and bam! Luckiest day of my life.

Edit: not changing anything, just wanting to add that this ghost og is making my written coherence absolute shit. Herc rules!!!!
 
Last edited:

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
To bad the persei runs its cartridges to fast.

What do you mean?

I get how the hammer works with the bender, but I've seen people saying it works great with the herc. How does that work? I don't have either one, but I've been looking into the both and don't seem to get how they work together.

Also I was wondering if I could get the hammer, the core, and the herc as a desktop (or car) unit? Am I missing anything I need there? Otherwise I was thinking of getting the Omicron v2 on sale for $50. Just not ready to drop $170 on a persei yet.

Hammer Top is different then the Hammer Rods, the tops are just like the regular tops but stay on once pressed for 2 minutes.


PERSEI doesn't cost $170, lol.

Yes it does. With the 30% coupon for FC its going to be around 119 plus shipping and handling and maybe tax if your in the great state of california (might be debated if its great or not, maybe next time but not now for sure).
 

Resinberg

Well-Known Member
I get how the hammer works with the bender, but I've seen people saying it works great with the herc. How does that work? I don't have either one, but I've been looking into the both and don't seem to get how they work together.

I just got a hammer top and I will never use another top for my herc I love it that much
I like to set my core at a low voltage say 6.7 on the 7.4 rod and I like to lay on the button for a few seconds this produces huge flavorful clouds
the biggest thing is comfort with the hammer top I don't have to jam my big thumb into that tiny little button
also a lot of the times my thumb covers the button and i don't even know if its glowing blue or not this way i don't cover the button i know when its on and when its off i have never had a problem where i left it on


You could have a persei for 80... ss kit and hammer top on sale... i woulda done that from scratch if i didnt have a friend.

true but your forgetting you just spent 80 dollars and don't have a cartridge to vape from or batteries to vape with or even a charger to charge those batteries that you don't have so the 119 might be a better deal in the end


@trich0me wow you got a nice set up there you sure you wanna part with it ?
i actually kept my persei in a drawer for about a year and a half because it was hard to understand
but once i got bored and decided to give it another shot I am thankful I did
once you figure out the Hercules cartridges you will use it all the time
I understand your frustration this is a tool you have to really understand how to use but when you do the rewards are huge
 
Last edited:

bdmonkeyj3w

Well-Known Member
*true but your forgetting you just spent 80 dollars and don't have a cartridge to vape from or batteries to vape with or even a charger to charge those batteries that you don't have so the 119 might be a better deal in the end*

With the sale price ill agree, but i see no reason to buy the persei unless you intend the herc. I 'like' the other carts, but herc is what i came for. Hope g doesnt hold this against me,(and no one gets frustrated i hype it so much) but get some third party super batteries, as newer tech than the aw's exist with still safe imr chemistry. I also recommend the nitecore series chargers. So knowing that, i wouldnt recommend the kit to just anybody unless they were sure they wanted to run the gambit of devices and carts and want a headstart.
 

invisiblefriend

Well-Known Member
Manufacturer
@ScienTiFiC ----- Is the new kiss going on sale this week ? (I'm going to grab a few more goodies while the coupon still in effect ) -- hint hint -- i want all goodies ready n new 4 the --- :) video ! ?!!!

also will rebuild kits be avail for kiss carts ? just curious ?

-- my OHM reader is definitely a dud unfortunately --- the #'s are l crazy n all ova place :)
gunna send in 4 check - up -- -- I guess I just send back just as it was sent to me ?



again re hammer !!!! That is sooooooo perfect for all my home use -- I just luv that button !

will the rod ever come back out for same ???


thx all -- n have super day !
 
invisiblefriend,

Resinberg

Well-Known Member
I just got my 74X upgrade with the threadless top cap am I missing an oring or does it just stick into place its a really snug fit I can see how it will easily stay in place but just curious I thought it was like the caps on the older carts
5p24v4.jpg
 
Resinberg,

Caligula

Maximus
I just got my 74X upgrade with the threadless top cap am I missing an oring or does it just stick into place its a really snug fit I can see how it will easily stay in place but just curious I thought it was like the caps on the older carts
5p24v4.jpg
That's how it is on the SR71. It'll stick fine after you use it a few times.
 
Caligula,
  • Like
Reactions: Resinberg

Resinberg

Well-Known Member
cool thanks im excited to use this thing I hated the threads
im also gonna squash my coil finally im sick of it riding up
I guess im gonna do it with vise grip pliers pinched between coins its all I really have right now I hope I don't squash it too small it doesn't even want to fit in the tubes

does anyone have a technique for squashing the ti coils ?
 
Last edited:
Resinberg,

bdmonkeyj3w

Well-Known Member
I already have a bunch of the aw Imr. Can someone pm me or provide a link to the best batteries for 7.4 and 3.7 with the ss kit running a hurc?
Is this the right nitecore?
http://www.amazon.com/gp/aw/d/B00KBEJ6SC/ref=mp_s_a_1_1?qid=1408134645&sr=8-1&pi=SY200_QL40
And/or
http://www.amazon.com/gp/aw/d/B00KBFZDI8/ref=mp_s_a_1_3?qid=1408134645&sr=8-3&pi=SY200_QL40
???

Either of those work, i have the i4 cause i run through batteries like a mofo. Nitecore does make a digi readout charger if you wanna drop the extra. I believe itll do diagnostics but i maybe misquoting. As far as batteries, look for the lgdbhe21865s. They put pit double the amps of the aws i believe. Should be 2 for 15 or so somewhere, i bought em at a store cause i didnt wanna risk shitty fake cells online. I only run 3.7 but i assumethey would perform fine stacked. Also runnin v1 top.
 
bdmonkeyj3w,
  • Like
Reactions: Andy

bdmonkeyj3w

Well-Known Member
Cool. So I will get this charger:
http://www.amazon.com/gp/aw/d/B00LCHICAU/ref=mp_s_a_1_7?qid=1408136397&sr=8-7&pi=AC_SX110_SY165_QL70

As far as the lgdbhe21865 batteries go I am having trouble finding them other then on Alibaba and eBay. Don't want fakes. Where could I find legit ones??
Give me a moment... i got mine from blue sky vapes if they have an online... ive found em on mod sites before and will post when i get a link.

Edit: nvm had it bpok marked for later https://www.allaboutvapor.com/vaporshop3/product.php?productid=18156
 
bdmonkeyj3w,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
You could have a persei for 80... ss kit and hammer top on sale... i woulda done that from scratch if i didnt have a friend. He couldnt figure out the basic cart configuration and was wondering how a standard imr couldnt power 5 ohm cart at 3.7 volts. I tried to explain, he said he was frustrated, and bam! Luckiest day of my life.

Edit: not changing anything, just wanting to add that this ghost og is making my written coherence absolute shit. Herc rules!!!!

...I hadn't thought of that. A million ways to do the thing I love. I'm sort of guessing I'll end up buying a persei or the new one coming up though. Eventually. I'm just super happy with my omicron lite and minicron lite with kiss carts for portable. Just grabbed a globe to try out too. I'm curious about the black wick and I want to see the coil while I use it to get my technique down too. I'm thinking of this as more of an at home desktop rig. I just see that pic of the herc dissembled on the product page and I WANT it something fierce. So pretty.....
 
StormyPinkness,
  • Like
Reactions: DieHard

bdmonkeyj3w

Well-Known Member
Ah shit... theyre 18650s... i recommend the efest 18350 v2, but they are the same power as the 18650 aws. I havent used my short tube in so lomg i dont know where it is. The performance that the lg 18650s afforded made it an easy decision to look like im walking around with a long skinny boner in my jeans.
 
bdmonkeyj3w,

DieHard

Accessory supplier
Accessory Maker
@THC SCIENTIFIC
Persei top died today. V2-0338. Flashing light when I press the button with Kiss or Herc attached. The same 2 carts work on my Hammer and Double top.
 
DieHard,
Top Bottom