nigel
And shepherds we shall be,for Accuracy & Discovery
Yes, indeed. In fact, Aldo is running one with them now. So, not all cases are non-viable. (Stated this previous)
Just the ones I am directly aware of have been done w/o permission.
Discontinued The Herbalizer
- Thread starter nopartofme
- Start date
Yes, indeed. In fact, Aldo is running one with them now. So, not all cases are non-viable. (Stated this previous)
Just the ones I am directly aware of have been done w/o permission.
goatgobaahh
Well-Known Member
*Frantically panting*
Hey guys enjoy!!
Fill a bowl about 1/2 way lightly
Place both aroma pads on top of them (evenly)
crank it up to 445f and enjoy infinite amounts of vapor you will choke on!!!
*vanishes into vapory clouds*
Hey guys enjoy!!
Fill a bowl about 1/2 way lightly
Place both aroma pads on top of them (evenly)
crank it up to 445f and enjoy infinite amounts of vapor you will choke on!!!
*vanishes into vapory clouds*
Vape-Nation
Well-Known Member
Totally agree with this, even after 10 minutes of vaping the same bowl on 445 temp using the fan and whip directly, I'm still not tasting anything bad. It's amazing.
Vapodudule
Well-Known Member
@Ratchett I find the adapter a bit large toward the bowl if large enough you could place a splashguard for HTs.
Glad to see more herbie outhere!
EDIT/ Herbie+whip is a ferrari with 300W in the foot, so that the harder you hit, the harder it milks! You have to light those 3 candles on da board.
Glad to see more herbie outhere!
EDIT/ Herbie+whip is a ferrari with 300W in the foot, so that the harder you hit, the harder it milks! You have to light those 3 candles on da board.
Last edited:
Sadly I had to make the base so big to meet the minimum requirements for wall thickness on ceramic 3D printing. While I can design other models to work in many materials, ceramic parts need to be specifically designed for ceramic
However that said, what do you mean splashguard? Can you show me a picture of one? I could possibly implement into my second ceramic prototype.
stickstones
Vapor concierge
I decided to do some real testing last night. I vaped two bowls from Herbie at 445 until there was nothing but trace vapor being exhaled. I then took that abv and filled an elb and hit it in the Evo on high. I was able to get four average hits before it stopped producing.
The Evo hits weren't very enjoyable, but they were there. They tasted crummy from the beginning and I thought I was getting close to combustion from the second hit. After checking the load the lower half was very dark.
I have long considered Herbie to have the same or more convection going on than any of my other vapes. The bowl just doesn't get warm without the second hand heat from the air passing through it. The Evo has a slight amount of conduction going on with the basket, and possibly some radiation heat happening, which is what I attribute the extra hits and darkening to.
Bottom line is I am comfortable throwing out my abv after I have expelled everything Herbie can get at 445, no matter how light the color of the abv is. Whatever little bit might be left in it is hard to get and tastes like shit anyhow.
The Evo hits weren't very enjoyable, but they were there. They tasted crummy from the beginning and I thought I was getting close to combustion from the second hit. After checking the load the lower half was very dark.
I have long considered Herbie to have the same or more convection going on than any of my other vapes. The bowl just doesn't get warm without the second hand heat from the air passing through it. The Evo has a slight amount of conduction going on with the basket, and possibly some radiation heat happening, which is what I attribute the extra hits and darkening to.
Bottom line is I am comfortable throwing out my abv after I have expelled everything Herbie can get at 445, no matter how light the color of the abv is. Whatever little bit might be left in it is hard to get and tastes like shit anyhow.
virtualpurple
Well-Known Member
If you are looking for a cure to a mild case of VAS, then I think you are in luck.This device is so robust and powerful, it will replace a small army of devices.
If you VAS is a very acute case, then this might buy you the time to recover.
But if your VAS is a *cough* chronic case, I don't think there is any cure for that other than "ALL OF THEM!"
No current discounts. And the device is so new (and in high demand) that I wouldn't expect to see any more on it for a while.
Again: Mass Drop doesn't always get permission and will quite just often grey market the products. The manufacture does not have to honor any warrantee sold though unauthorized resellers. Goes to show how great the Herbalizer customer service is that they said they would still take care of this batch of people. But, BUYER BEWARE.
(Oh, and note how vague any warrantee documentation is at MD. They claim it is a "full" warrantee, but as other purchasers of other vapes have found out only well afterwards, it is a "MassDrop Warrantee", not the manufacturer's. Which means when something goes wrong -- if MD still backs the device -- it has to source another grey market unit. It's all a bit shady.)
I apologize, I didnt mean to misrepresent things. It seems my knowledge is on the shallow end.
Thanks Sticks, this is huge for me....the two things that kinda hold me back are price and the fact that the abv isn't super dark. I now realize that abv colour means nothing in terms of extraction, and in fact I personally feel that the tradeoffs of darker abv arent worth it. This is another reason why I long for Herbie, I feel that it is a healthier device. Using it has even changed my vaping habits, as i've very much dialed down the temps on all of my vapes, and as a result I now have a preference for abv that is light to med brown, much like the colour of tobacco....I don't go for the dark coffee ground abv, as it just tastes gross anyway.
What is the recommended temp to store the devise itself. I keep my vapes in a garage/shop, and sometimes in the heat of the day it possibly gets up to 90+ degrees in there. Do you think this devise would be ok at that temp, or should it be kept in a air conditioned room?
Been Vapin
Fringe Class
Operating Temperature: 50 to 104°F (10 to 40° C)
Storage Temperature: 32 to 125°F (0 to 52°C)
Humidity Range: 30 to 85% RH
You don't want to leave Herbie in a hot car, or use Herbie in a very moist environment.
I found the definition of operating temperature interesting.
An operating temperature is the temperature at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating temperature). Outside this range of safe operating temperatures the device may fail. Aerospace and military-grade devices generally operate over a broader temperature range than industrial devices; commercial-grade devices generally have the narrowest operating temperature range.
It is one component of reliability engineering.
Last edited:
grokit
well-worn member
@Ratchett, for some reason I thought you would be making a different bowl top with a built-in pong rather than an adapter that sits on top of it, did you consider that? Looking good regardless 
The only thing I would add to this comparison is that this "last bit" doesn't taste bad at all if you load the evo with green herb, because you will be getting that last bit along with the first "terpinny" bits so a more complete extraction without the poor taste. For me herbie is more of a daytime vape, when I want to get knocked out it's the evo/infinity. I feel the same about herbs in the sublimator compared to sublimate.
stickstones
Vapor concierge
hmmmm...I'll have to test that one out!
lazylathe
Almost there...
@stickstones If you really want to cash a Herbie bowl there is one sure fire way that I know of and do every time.
When done at 445 open the bowl and empty the contents.
Grind/crush the material to a fine powder and reload the bowl.
Replace at 445 and find those last few remnants!
And still no popcorn taste!!
When done at 445 open the bowl and empty the contents.
Grind/crush the material to a fine powder and reload the bowl.
Replace at 445 and find those last few remnants!
And still no popcorn taste!!
GoldenBear
Member
anyone having any problems with the fan? Has it lost its touch over time?
Vapodudule
Well-Known Member
Well in some use, herbie could be sensible to airflow breaking performance, could you describe your issue?
IIRC there is 3 fans for 3 functions (please correct me if wrong):
-blowing bag
-cooling the inside of device
-cooling the bulb to regulate temperature
I noticed a lack of performance in F#1 while executing F#1 and F#2 at the same time. A hot device running F#2 is clearly noticeable.
I have few question about the filtering of the intrant air and the maintenance associated. The parralel with the volcano is obvious. Do we know something about it?
nigel
And shepherds we shall be,for Accuracy & Discovery
I will leave in bowl and use the other end of the brush in a Mortar & Pestle way. (But grind against bowl edges, not downward on screen.) if it is well vaped, the ABV will just crumble under slightest pressure. Presto! More bags!
Vicki
Herbal Alchemist
Herbalizer really rocks! 
Here is the email I just received from them:
Attention Herbie Friends!
We are starting a pilot program called the Friends of Herbie Referral Program! Love your Herbie? For a limited time, help a friend save some cash, and earn a reward at the same time.
For each Herbalizer sale at Herbalizer.com using your Member ID code you'll earn $50 in Herbalizer store credit, and your friend will receive a $50 discount.
HOW TO ENTER:
1. Providing your name, email, phone, and Herbie serial # (if you own one)
2. Receive a unique Herbalizer Member ID code
3. Share your Member ID code with a friend via phone, email, Facebook, whatever!
4. Your friend enters the Member ID code at checkout at Herbalizer.com
5. When your friend saves $50, you earn $50 in store credit
6. To redeem their store credits, simply contact support@herbalizer.com.
You will be given access to special tracking software, so you can log in anytime and see how much you’ve earned.
*Store credits are non-transferable, and valid for one year. And yes, you may add them up!
FIND OUT MORE
Peace and love from,
The Herbalizer Team
Here is the email I just received from them:Attention Herbie Friends!
We are starting a pilot program called the Friends of Herbie Referral Program! Love your Herbie? For a limited time, help a friend save some cash, and earn a reward at the same time.
For each Herbalizer sale at Herbalizer.com using your Member ID code you'll earn $50 in Herbalizer store credit, and your friend will receive a $50 discount.
HOW TO ENTER:
1. Providing your name, email, phone, and Herbie serial # (if you own one)
2. Receive a unique Herbalizer Member ID code
3. Share your Member ID code with a friend via phone, email, Facebook, whatever!
4. Your friend enters the Member ID code at checkout at Herbalizer.com
5. When your friend saves $50, you earn $50 in store credit
6. To redeem their store credits, simply contact support@herbalizer.com.
You will be given access to special tracking software, so you can log in anytime and see how much you’ve earned.
*Store credits are non-transferable, and valid for one year. And yes, you may add them up!
FIND OUT MORE
Peace and love from,
The Herbalizer Team
Hey all!
Just wanted to post an update about the Herbie 18mm Adapter! The design is finished and I've ordered the first ceramic model - hopefully the prototype is a perfect fit (but who knows!) - I will have the ceramic prototype sometime in early September!
I like the looks of itr! At least it seems like it will stay on better than the black pieces. Aside from it being a handy adapter, what are the other upsides of your adapter would you say?
letter never sent
reckoner
This is a very minor issue, but has anyone else had the foam feet under the unit start to come loose? The adhesive has begun to degrade at the corner of one of mine.
The area where the foam is located is one of the hottest parts of the unit when in use, so I guess it makes sense that the adhesive is being affected? I wonder what material is being used.
Again, this isn't much of an issue at all, just something I happened to notice one day. It says a lot about the Herbalizer's quality that I have to go searching under rocks (or pearls) in order to find something to complain about.
On an unrelated note, I signed up for the referral program. Well, I haven't received a response yet, but I submitted my info. Unfortunately, I don't personally know many people who would be willing to drop $679 on a vaporizer. Kudos to the Herbalizer team for the initiative though!
The whip is my favorite method. You can get huge hits with it, especially by using the fan assist. Try running it through glass if you have an adapter handy.
Also, make sure you're getting a proper seal with the bowl. I had that problem when I first received my unit.
The area where the foam is located is one of the hottest parts of the unit when in use, so I guess it makes sense that the adhesive is being affected? I wonder what material is being used.
Again, this isn't much of an issue at all, just something I happened to notice one day. It says a lot about the Herbalizer's quality that I have to go searching under rocks (or pearls) in order to find something to complain about.
On an unrelated note, I signed up for the referral program. Well, I haven't received a response yet, but I submitted my info. Unfortunately, I don't personally know many people who would be willing to drop $679 on a vaporizer. Kudos to the Herbalizer team for the initiative though!
The whip is my favorite method. You can get huge hits with it, especially by using the fan assist. Try running it through glass if you have an adapter handy.
Also, make sure you're getting a proper seal with the bowl. I had that problem when I first received my unit.
Last edited:
grokit
well-worn member
You can use a bigger diameter whip (3/8" id, 1/2" od) for more volume, it will fit on the outside of the bowl connector instead of the inside. 7th floor whip tubing fits perfectly.
darkadious
Well-Known Member
It says a lot about the Herbalizer's quality that I have to go searching under rocks (or pearls) in order to find something to complain about.
when you're dropping that much money on a vape, it better be damn near perfect.
lazylathe
Almost there...
I am back to the whip again!
No bad taste or anything from the material.
I used a larger diameter silicone tube for a while but am back to the regular whip.
I only use the fan assist when using my WT's these days.
Regular whip with massive clouds on a daily basis!
More practice!! LOL!!
the magnet on my bowl just became stuck to the herbalizer, have they replaced the bowl when this has happened?