Cheap High Quality Bubbler

ou812?

ou812?

Well-Known Member
SnidelyWhiplash said:
http://www.dhgate.com/product/hot-s...glass-smoking/190628396.html#s1-1-1|871861034

Anyone have one of those?


Makes me want to build a website that just resells the best Chinese glass. I wonder how much markup I could get away with without insulting anyone.
Click to expand...


Most all of the import you see around in either LHS's or other online vendors ALL mark it up and most are buying bulk lots and from there its up to you.You wouldnt believe the numbers I see locally of the exact same glass:disgust: but some just dont know about cutting out the middle :D, oh well sucks to be them.
Takes a little scratch and a web site and paypal,from there you have to try to feel things out for online,have to work on exposure, no physical store front..There are other import markets that also sell nothing but bulk of everything under the sun and ship globally. Can be done, free advertising thru soc.media sites ,C.L. .............
 
BoogerMan

BoogerMan

Well-Known Member
tqbf said:
Can someone comment on the quality of the glass from china? How is the worksman ship?

I'm considering getting this

http://www.usedvictoria.com/classified-ad/Cheech-Honeycomb-7mm-bong_22625188

Would anything on dhgate give a comparable hit at a cheaper price? I've looked at the D0202w and the d022 and they seem interesting so far.
Click to expand...

Quality of the China glass: "you get what you pay for"

It is cheap so the quality wont be perfect.

There will be:
bubbles/imperfections/scratches/not the straightest moutpieces/percs

However, I would say maybe one in every 10 will be near perfect. It is all the luck of the draw.

To help increase my chances of getting the near perfect one, I order 2-5 of the same piece, pick out the best one, then sell my extras to friends or on Craigslist.
 
P

Propaganja

Well-Known Member
ataxian said:
KyH8lIW.jpg

This piece is really thick 7 - 9 mm
Doesn't diffuse like some of my bubblers however by adding a ash collector the dynamic of this piece is enhanced.

This ASH COLLECTOR works with a jhook or bubbler as well. The old piece I had came alive when I put this AC as a attachment!

I'm out of GSC so I've been stuck with mostly INDICAS.
The D022 I will use tomorrow when I load up on a new batch of HYBRYD.
Click to expand...

hey @ataxian do u use ur nano gong filled up like that? and is it touching the heater? would that be an 18mm gong'?
 
Propaganja,
Frederick McGuire

Frederick McGuire

Aggressively Loungey
tqbf said:
Can someone comment on the quality of the glass from china? How is the worksman ship?

I'm considering getting this

http://www.usedvictoria.com/classified-ad/Cheech-Honeycomb-7mm-bong_22625188

Would anything on dhgate give a comparable hit at a cheaper price? I've looked at the D0202w and the d022 and they seem interesting so far.
Click to expand...
I've always thought the cheech brand was made in china, though thinking back on it, I've got no actual basis for that assumption.

I've got no experience with the website you listed, but I absolutely don't trust that listing.

1 - they state the piece isn't as clean as the one in the picture, so
a) that's not a picture of the actual piece
b) they may ship you a slightly dirty piece.
2 - they call it a honeycomb, when it seems to be some kind of inverted showerhead.
I'll cut china sellers a lot of slack with names of percs due to language barriers etc, but assuming that seller is supposed to be a native English speaker, it's a red flag to me.

The design of the piece leaves a bit to be desired IMO, I'd much rather have something like the d020-2--w, but if you like that design I'm pretty sure there's something like that from Kathy or sunshinestore...

Regarding build quality,
So far I've purchased the following pieces:
D020
D020-W
D020-2--W
The virus rig (model number starts with a W)
GB 186 & GB 187 (I may have the numbers wrong, but they're the möbius ion clone and 60b clone)
Fritted ash catcher

No issues with any of them, all good build quality.
The D020 doesn't have fire polished slits, but I knew that going in.
The virus rigs showerhead look a little cheap, but functions perfectly.

The only piece I've had any significant build issues with was the fritted ash catcher I purchased, it had 2 small cracks at the disk, and a pinhole leak or 2 at the joints.

It was only a $10 piece, so I didn't bother getting a refund...

Some other members have had issues with build quality, but I've been very happy so far.

For the price of that 1 used cheech piece, you could get yourself 2-3 brand new china pieces. :2c:
 
Last edited:
jambandphan03

jambandphan03

in flavor country
Got the wig-wag inline piece in today and I have to say it is really nice. Good size, 18mm male joint, almost 10" "tall", doesn't stand up, but you can lay it down while filled, with the mp pointed down and it doesn't spill. Over all it's a really well made piece, even with the price increase, I feel it was well worth it. The dish, dome and dabber are nice and match as well. The dome is also worked and matches. So far I've only used it with the lotus. More testing is in order... :tup:

http://www.dhgate.com/store/product...glass-bongs-mini/193726279.html#sshot_-4-null

MBx0ys9.jpg

FeAoaXQ.jpg

eWgPEKI.jpg

AsKz0RR.jpg

zTSNSKi.jpg

 
Last edited:
T

tqbf

Well-Known Member
Frederick McGuire said:
I've always thought the cheech brand was made in china, though thinking back on it, I've got no actual basis for that assumption.

I've got no experience with the website you listed, but I absolutely don't trust that listing.

1 - they state the piece isn't as clean as the one in the picture, so
a) that's not a picture of the actual piece
b) they may ship you a slightly dirty piece.
2 - they call it a honeycomb, when it seems to be some kind of inverted showerhead.
I'll cut china sellers a lot of slack with names of percs due to language barriers etc, but assuming that seller is supposed to be a native English speaker, it's a red flag to me.

The design of the piece leaves a bit to be desired IMO, I'd much rather have something like the d020-2--w, but if you like that design I'm pretty sure there's something like that from Kathy or sunshinestore...

Regarding build quality,
So far I've purchased the following pieces:
D020
D020-W
D020-2--W
The virus rig (model number starts with a W)
GB 186 & GB 187 (I may have the numbers wrong, but they're the möbius ion clone and 60b clone)
Fritted ash catcher

No issues with any of them, all good build quality.
The D020 doesn't have fire polished slits, but I knew that going in.
The virus rigs showerhead look a little cheap, but functions perfectly.

The only piece I've had any significant build issues with was the fritted ash catcher I purchased, it had 2 small cracks at the disk, and a pinhole leak or 2 at the joints.

It was only a $10 piece, so I didn't bother getting a refund...

Some other members have had issues with build quality, but I've been very happy so far.

For the price of that 1 used cheech piece, you could get yourself 2-3 brand new china pieces. :2c:
Click to expand...
]

What are 'fire polished slits' and do they make a difference?
Overall, is the cheech glass thing basically a rebranded chinese piece, or does it have anything more going for it?
 
tqbf,
DieHard

DieHard

Accessory supplier
Accessory Maker
tqbf said:
]

What are 'fire polished slits' and do they make a difference?
Overall, is the cheech glass thing basically a rebranded chinese piece, or does it have anything more going for it?
Click to expand...
Slits or cuts that are flame-polished will be clean and clear. If they are not polished they will look frosted and sharp. It is mainly aesthetics but the polishing may make the area of the slits more stable and less likely to crack.
 
Frederick McGuire

Frederick McGuire

Aggressively Loungey
I'm no expert on how they do it, but I believe generally when showerheads (or inlines or trees) have slits as opposed to punched holes, it means that they used some kind of diamond blade or something to cut those slits.

This leaves them with a relatively rough finish, and you can see it by looking at the slits - the edges of them will look frosted instead of smooth and clear/glassy.

With higher quality pieces, the blower will generally heat the slits back up, and those edges will melt a little bit and revert back to a more smooth edge.

I don't really know of any benefit aside from the aesthetics of it, but it is something to note.
Edit: die hard ninja'd me :ninja:

I honestly can't tell ya if Cheech pieces are rebranded china stuff.
That's the impression I got from seeing pics of their pieces online, and seeing their price point, but I've got no facts to back it up, so take it with a grain of salt :)

IMO that piece you posted doesn't have much going for it, but if you like it that's really all that matters... Quite a few members here are quite taken by the looks of the D-022, I personally am not interested in it at all... Different strokes for different folks :)
 
T

tqbf

Well-Known Member
Frederick McGuire said:
I'm no expert on how they do it, but I believe generally when showerheads (or inlines or trees) have slits as opposed to punched holes, it means that they used some kind of diamond blade or something to cut those slits.

This leaves them with a relatively rough finish, and you can see it by looking at the slits - the edges of them will look frosted instead of smooth and clear/glassy.

With higher quality pieces, the blower will generally heat the slits back up, and those edges will melt a little bit and revert back to a more smooth edge.

I don't really know of any benefit aside from the aesthetics of it, but it is something to note.
Edit: die hard ninja'd me :ninja:

I honestly can't tell ya if Cheech pieces are rebranded china stuff.
That's the impression I got from seeing pics of their pieces online, and seeing their price point, but I've got no facts to back it up, so take it with a grain of salt :)

IMO that piece you posted doesn't have much going for it, but if you like it that's really all that matters... Quite a few members here are quite taken by the looks of the D-022, I personally am not interested in it at all... Different strokes for different folks :)
Click to expand...


I went ahead and bought it, it turned out to be a cheech he058.

I personally loved the design of the d020-w-2 and how it'd let you see the vapor fill the chamber, and I've been considering ordering that for a while. I guess i bought the he058 because it resembled the d020-w-2.

Now that wig wag inline recycler looks interesting...
 
tqbf,
overslept

overslept

Member
overslept

overslept

Member
BoricOxide said:
Mind sharing when you placed your order? And did she mark it shipped? Mine has just been processing.
Click to expand...

ordered it july 20, shipped in about 20 minutes with tracking number

today is july 28 and it is in my hands, #dhgatelife

edit: remember to copy your tracking number into the USPS website, it's more accurate

here is what the dhgate tracker looks like for me right now (doesn't even say delivered yet)

YLyrlHB.png


and the USPS tracker

IOnuG55.png
 
Frederick McGuire

Frederick McGuire

Aggressively Loungey
SnidelyWhiplash said:
This is kind of making me interested: Cheap for what it is, hopefully worthy of this thread:
http://www.ioffer.com/i/18mm-no-bong-waterpipe-2-grid-perc-recycler-stemless-14-575835098
13-194_1.jpg


That dealer has some pretty affordable stuff...
Click to expand...

A decent amount of the stuff that seller has looks like marked up china stuff to me (pretty sure I spotted a D020-D for $100) - quick, denizens of cheap high quality bubblers - help me find his supplier :lol:

At the prices he's charging, I won't be buying anything, but if we can find them from the supplier for 1/2-1/3 of the price, I may just have to pick up a couple of them ...

Curse you GAS :argh:
 
Cannabis Connoisseur

Cannabis Connoisseur

I LOVE LIFE
Clean Clear glass has two pieces I'd be all over with a few mods. They have a Swiss perc that needs a bridge support or a cheaper price.They also have a inline straight neck that needs to be bent. The inline is on my list cause its 18mm just don't like straight necks. Good thing about the inline though I'd its 18mm female.
 
Last edited:
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
MuushuPork said:
I want that piece but with no HC and female instead of male. Anyone in touch with alina?
Click to expand...

Lol, you do realize this is chinese glass, right? They don't DO custom orders. They pump out a million of them at a time. The sellers you see are not the people who make the piece - they are merely re-sellers.

Given how small refunds offered by some of these sellers for broken glass shipments, I suspect the price they pay for MOST of this glass we discuss is under $5 per piece.

Unless of course, you're willing to buy 100+ of a model, you might have some input on customizing your order
 
You must log in or register to reply here.
Top Bottom