Delta3DStudios

Well-Known Member
Accessory Maker
Hey first time poster here. I have a few portables but I was looking into this vape. It looks very impressive. I had a question i was hoping someone could answer. If I was to order some wood from Snappo would I still be paying the full price listed on the Enano website or is it cheaper since I'm buying the wood?

Welcome!

Having just gone through the process with my exotic Afzelia burl I'll put in my $0.02 - There is an item on EpicVape for "Your wood, our Nano" - the price is $195.95 (same as the regular nano) - but you also get the 10% discount with the FCLOVE code

So no, you don't get a discount since you are supplying your own wood. However, you are getting a better price than Andy charges for his exotic vapes (I paid over $200 after the FClove discount for my exotic figured walnut which was listed on the store directly) - In reality - you get to choose - pay $195.95 for what Andy has in stock - or supply your own wood, pay the same price, and wait 14 days for turnaround.

Seems like a fair tradeoff to me
 
Last edited by a moderator:

Propaganja

Well-Known Member
the nano is out for delivery =).. i dont know what the one day delay was at the post office, but it passed customs and is on the route to me.. will give my opinion after a few sessions to get familiar. only other vapes i have are solos + gong n fbomb since april 2014, before that ive been a spliff n blunter for 7+years.
 

Maine420

GROOVY GRANNY
Really enjoying my E-Nano! High folks! Haven't been on much lately! My Nano has been a faithful, loyal companion to me! I've had it since April, runs like a charm, and does the job quite nicely! Still dry vaping, and loving it! The taste of today's medicine, Blue Cheeze, at level six is superb! Ta Ta!
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
This just in - THANKS Joda Glassworks! Yet another OUTSTANDING work of Function & Art!!! I'm in E-Nano HEAVEN!!!
AGu8eYq.jpg

2sIjB1J.jpg
 

Propaganja

Well-Known Member
so i received my walnut e nano (yay finally after all the posts from being impatient lol thanks everyone for puttin up with it, and thank you very much @ACE OF VAPE for all the help, email response, and great packaging even tho customs went through it lol). didnt know it came with carrying case and a tube. what are the silicon cuts for anyone? and is there a burnoff i have to do like the solo? thanks again FC

edit:also i couldnt find the cotton that was suppose to be included.. where can i get ss balls for oil

edit: finished testing a little, started 6 dry then upped to 6.5 then 7.. coulda got more but dropped the load on the floor as i was removing the stem from the vape (rookie mistake) very conservative vaporizer..
loaded a pinch into the gong through d020-w at 7, didnt get noticeable vapor but felt the kick.. turned it up to 8.25 and bam, slapped in the face.. a few more tokes as im writing this and im baked outta my mind.. hits hard.

impressions: nice small package, smaller than expected.. love the wood look. very efficient.. didnt expect it to use less than the solo, but damn everyone on here isnt lying when they say they load up less than a .1. coming from the solo, the e nano feels like it has no draw restrictions lol.. thats a + aswell because the heater can keep up with heavier pulls.. especially for friends that are use to smoking joints etc..

Overall i am glad i purchased this product, reading this thread and seeing first hand customer service and how happy everyone is with their nano made me jump the gun lol. ordered it on the 10th and received it on the 24, international shipping.. well worth it. will be experimenting with shatter tonight, if anyone can give me some tips i would greatly appreciate it.

thanks everyone
 
Last edited:

TeeJay1952

Well-Known Member
My tips for shatter:
use chopstick to move bowl slightly higher
Use q tip cotton pulled as wide & thin as can be and wrap less wax than you think.
Cotton is needed to absorb wax. If not enough cotton wax melts through screen and fills sides of tube.
Too much cotton. Dry hits, little vapor. Burning smell and taste. Do Not let cotton hit heater once inserted.
I have Enano set to 10. doesn't burn cotton and vapes wax instead of melting it.
I get up to (I think 50 is when I quit counting, biggest hunk) 20 hits or thereabouts. I use a clean toothpick to toss ball about the chamber after 10 hits.
 

Propaganja

Well-Known Member
can i use the nano upright or do i have to turn it upside down with the shatt. can i give me a ratio like how much shatt to cotton..
 
Propaganja,

TeeJay1952

Well-Known Member
can i use the nano upright or do i have to turn it upside down with the shatt. can i give me a ratio like how much shatt to cotton..
You will use Nano at 90 degree angle unless upside down for bong. It will be parallel to the ground, straight away from bowl.
Wrap shatter with cotton. Make a pull from Q tip. About 25% of tip. Make it as thin and wispy (stretch in all directions) as you can. Drop wax into middle and roll. Pre heat Nano for 10 minutes. Drop in bowl, suck in air to make it seat on bottom. Go get a hit using the wa wa suck (like a milkshake) filling and clearing chamber over and over till satisfied. There is a cool video posted (hint hint)
 

Digeridoo

New Member
Hey I just received the new "Adjust-a-bowl" from Epicvape. I was using the old glass pipe attachment piece before, and the metal part of the E-Nano would go about halfway down into the bowl and then stop, which is what I assume was the intended functionality. However, on the new one, the metal part only goes in just a tiny tiny bit (maybe a millimeter?), not nearly halfway down the bowl like the old model. Also if I try to push it down any further, it just gets stuck, something that never happened with the old model. Has anybody else experienced this? Intended, or should I contact them for a replacement piece?
 
Digeridoo,

TeeJay1952

Well-Known Member
Hey I just received the new "Adjust-a-bowl" from Epicvape. I was using the old glass pipe attachment piece before, and the metal part of the E-Nano would go about halfway down into the bowl and then stop, which is what I assume was the intended functionality. However, on the new one, the metal part only goes in just a tiny tiny bit (maybe a millimeter?), not nearly halfway down the bowl like the old model. Also if I try to push it down any further, it just gets stuck, something that never happened with the old model. Has anybody else experienced this? Intended, or should I contact them for a replacement piece?
Take a chop stick and push metal bowl out of tube.
Point tube so the Bowl is inserted at bottom with sides pointing downward and push up to desired spot with chopstick.
You now have a "floor" that is either low for larger bowl (less filling) or higher so that you can turn heat down (taste great, I know I heard that somewhere else ):myday: You are talking about tube and not bong attachment
 
Last edited:

Digeridoo

New Member
Take a chop stick and push metal bowl out of tube.
Point tube so the Bowl is inserted at bottom with sides pointing downward and push up to desired spot with chopstick.
You now have a "floor" that is either low for larger bowl (less filling) or higher so that you can turn heat down (taste great, I know I heard that somewhere else ):myday: You are talking about tube and not bong attachment

Hi, I meant this attachment: http://www.epicvape.com/index.php?route=product/product&path=62_64&product_id=53

I'm not having problems moving the adjustable screen up and down, I'm having problems with the E-Nano not being able to "mate" very well with the top of the bowl.
 
Digeridoo,

Digeridoo

New Member
Interesting, can the Nano actually sit in it without you holding on to it?
It can for a little bit, but is very tilted. When I tried just now, it fell out after a minute or so. I have had the E-Nano for about a year now with the glass wand and (old model) GonG attachment, and I know it should be able to sit on the bowl without it tipping over. I know there should be a little "give" where the E-Nano can swivel around a little bit, but not to this extent of it falling over.
 
Digeridoo,

Enchantre

Oil Painter
It can for a little bit, but is very tilted. When I tried just now, it fell out after a minute or so. I have had the E-Nano for about a year now with the glass wand and (old model) GonG attachment, and I know it should be able to sit on the bowl without it tipping over. I know there should be a little "give" where the E-Nano can swivel around a little bit, but not to this extent of it falling over.
I have one stem, from way back, that has the same issue. the glass tolerances are just a bit too tight.
Contact @ACE OF VAPE ... use the customer service thing on the website... for a replacement.

I do use my "tight" one, occasionally, I just have to hold them together while I do.
 

biohacker

Well-Known Member
I think maybe there was a QC issue with the crimping/stamping the glass...Andy will replace it no hassle. The Gong's are an incredible deal for $14....especially for such incredible thick quality...thanks Andy.

The crimp should be about a 1/2" (1cm) down...not 1mm.
 

Propaganja

Well-Known Member
for those who havent been here, this is my second vaporizer, first vaporizer in my artillery is a solo...
soo.... after having another session with the new nano, im realize im trying to get it to perform like the solo: like load a bowl, turn it to 5, getting heavy vapor and have a 12 min session ending at 6. how do i replicate that with the nano? what temp settings is best for that and most likely i would have to use more herb instead of a .05? and also i notice it gotta take a few hits with the gong + bubbler before i get clouds into the bubbler at setting 8.. whitewalls but it kills the load fast, and starts to taste bad quick... with the solo i can get a good 12 minute session on 6 with gong.. im not doubting the nano as it already blown me away... but just trying to figure out different techniques with the nano.. thanks ahead for any advice
 
Propaganja,

flotntoke

thoroughly vaped
for those who havent been here, this is my second vaporizer, first vaporizer in my artillery is a solo...
soo.... after having another session with the new nano, im realize im trying to get it to perform like the solo: like load a bowl, turn it to 5, getting heavy vapor and have a 12 min session ending at 6. how do i replicate that with the nano? what temp settings is best for that and most likely i would have to use more herb instead of a .05? and also i notice it gotta take a few hits with the gong + bubbler before i get clouds into the bubbler at setting 8.. whitewalls but it kills the load fast, and starts to taste bad quick... with the solo i can get a good 12 minute session on 6 with gong.. im not doubting the nano as it already blown me away... but just trying to figure out different techniques with the nano.. thanks ahead for any advice

First, read the thread like you probably should have instead of informing us of every tracking movement while you were waiting for it. All of your questions are answered, and much more info can be found in just the past 50 or so pages. If I were you, I'd go back 100 and start reading forward. Not that hard, and very easy to skim past the nonsense (like - where is my nano? it's not here, yet! when will it get here?, how long did your's take? mine's taking a day longer.... etc).

Nano is not solo. Nano is A/C, plenty of heat with no drawdown. Not as much material is usually loaded at the same time. Less material = less vapor. Think you still get more out of your stash with the nano, but not 4 times more. My estimation nano takes about 1/4 of solo load for full small nano load (my solo/nano loads anyway), but usually gives 1/2 as many hits. So you're twice as well off.

Temp settings are not going to be exactly the same for everyone (whether nano or solo). There are too many variables. How sparkly is your stash? How dry? What type of bubbler? How hard do you hit it? What type of cloud/taste are you looking for? Ambient room temp? etc, etc, etc. I'd suggest you start at 5.5 and work your way up 1/2 setting with each hit, giving a stir in between. Also, pay attention to where your screen is if you have adjust-a-bowls. That will also make a difference.

If you're not getting vapor directly on your hits as you like, try preheating the load for a minute or 2 (just leave the nano on without drawing), and draw slow and smooth at first. Don't try to churn up mad bubbles right out of the gate. Think you'll enjoy the flavor more with this method, too.

And... I guess it's time again because apparently many seem to think this thread didn't start until they started posting in it :cool:

Check out @Caligula 's 2 hit extraction vid. Click on vid link in his sig. Find that vid in the list. Watch closely and take notes if you have to. Get that down, and expand your knowledge with experimenting and reading the thread from there. This bit may also help... http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-244#post-609808
 

Stu

Maconheiro
Staff member
ignorant but you dont think i have read the thread?
@cafagula
keep making your videos tho. 2 hits of nonsense lol. "my solo will give you 12 hit extractions and more" that video will destroy yours. just sayin lol.
Please read the Forum Rules. I've not seen this level of disrespect towards a community in a while.
i think the moderators of this forum need to put some members in check?? i think some of you been a little to comfortable.. - symptoms of cannabis =)
I'm glad you think that way. Surely you will understand the warning point that you've just earned with the asshatery above.

:peace:
 
Top Bottom