• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Advanced E-cig users and oil/wax, how-to "one-hitter-quitter"

2clicker

Observer
@2clicker im just gonna order a mod from you dude.:clap:

your a vendor right! :rofl::doh:

i wish i could make a living working on fun shit like this but unfortunately not. i do have a solid design for a dabbers atty. i have actually considered buying one of those desktop cnc machines to make them.

i wish the day was 48 hours long.
 
2clicker,
  • Like
Reactions: 063_XOBX

fernand

Well-Known Member
@2clicker where can one buy a sleeved stovetop coil?

BTW, I'm confused. Isn't Silica = glass = Silicon Dioxide? And isn't naturally occurring Quartz also = Silicon Dioxide in just a more crystalline state? Anybody know what's the difference?

@2clicker, Wow, frankly it didn't occur to me that anyone would bite through the plating enough to flake it. I figured these would have other failures before THAT! Maybe I'd put a softer drip tip on it, like Delrin?

Loved the SS rounded tip, but the problem with the miniAeroTank was the way the bottom threaded tube was spot-welded in the cross-bar and fell apart. Using that tip on a mPT3.

@215z, Yes, if you want to use the tank, filling with thick oil is tough if it's not coming down a (fat) needle. I've been vaping PureGold and thick oil in the mPT2's with a 2.2 ohm head, just as if it were designed for it, it works. But the next one I fill I'm going to try to dribble warm erl into the tank unassembled, i.e. while holding the pyrex tube to the top part with some tape, then screw the top and bottom together with the head already in the bottom, then take off the tape.
 
Last edited:
fernand,

2clicker

Observer
@2clicker where can one buy a sleeved stovetop coil?

BTW, I'm confused. Isn't Silica = glass = Silicon Dioxide? And isn't naturally occurring Quartz also = Silicon Dioxide in just a more crystalline state? Anybody know what's the difference?

@2clicker, Wow, frankly it didn't occur to me that anyone would bite through the plating enough to flake it. I figured these would have other failures before THAT! Maybe I'd put a softer drip tip on it, like Delrin?

Loved the SS rounded tip, but the problem with the miniAeroTank was the way the bottom threaded tube was spot-welded in the cross-bar and fell apart. Using that tip on a mPT3.

you would have to build the sleeved stove top coil. i have pics and description of materials needed a few pages back. its basically just a normal stove top coil, but thread the wire through some 2mm readyXwick before building.

regarding plated protank flaking... i didnt bite it. lol... its flaked just from use. i dont use metal drip tips. delrin only for me thanks. but both my old protank mini and my anyvape devide mini both have the plating either flaking off or just rubbing off. the plating used on them is weak me thinks. either way i like the brushed finish of the SS tanks over the chrome plated finish.
 

215z

Well-Known Member
I should add that in theory I choose stainless steel over chromed brass due to price. Machined SS is far cheaper than a hard chromed finish - done right. Ask any firearm enthusiast about finishing options. "I like the look and performance of hard-chromed low-carbon steel, but for now I can only afford high-carbon (stainless) steel".

If someone is selling chromed brass for the same price as stainless steel, it is some shoddy plating work. Decorative chroming, which Chinese manufacturers use for our shiny water faucets, is measured in the millionths of an inch. Hard chrome is measured in the thousandths of an inch.

Hard chrome is used on hydraulic pistons
stock-photo-detail-of-hydraulic-bulldozer-piston-excavator-arm-construction-machinery-white-background-158213945.jpg


Reciprocating machinegun components, as well as machinegun & cannon barrels
bhi-chrome-bolt-carrier-group.jpg


Seriously, hard chromed finish is the shit. But if someone is selling it cheap, it is shit. And it begs the question of how cheaply the underplating is done (not neccessary with pure brass) and how cheap the brass is.

You can get your atomizer chromed by legit reputable people (ex Metaloy) for about $35 to $70. Seems way cheaper to just buy the stainless steel item in the first place.

Scaremongering over, we now return you to your regularly scheduled broadcast. That sleeved flat spiral @2clicker wound is the shit, I don't have the skills and dexterity to wind a usable flat spiral.
 

2clicker

Observer
I should add that in theory I choose stainless steel over chromed brass due to price. Machined SS is far cheaper than a hard chromed finish - done right. Ask any firearm enthusiast about finishing options. "I like the look and performance of hard-chromed low-carbon steel, but for now I can only afford high-carbon (stainless) steel".

If someone is selling chromed brass for the same price as stainless steel, it is some shoddy plating work. Decorative chroming, which Chinese manufacturers use for our shiny water faucets, is measured in the millionths of an inch. Hard chrome is measured in the thousandths of an inch.

Hard chrome is used on hydraulic pistons
stock-photo-detail-of-hydraulic-bulldozer-piston-excavator-arm-construction-machinery-white-background-158213945.jpg


Reciprocating machinegun components, as well as machinegun & cannon barrels
bhi-chrome-bolt-carrier-group.jpg


Seriously, hard chromed finish is the shit. But if someone is selling it cheap, it is shit. And it begs the question of how cheaply the underplating is done (not neccessary with pure brass) and how cheap the brass is.

You can get your atomizer chromed by legit reputable people (ex Metaloy) for about $35 to $70. Seems way cheaper to just buy the stainless steel item in the first place.

Scaremongering over, we now return you to your regularly scheduled broadcast. That sleeved flat spiral @2clicker wound is the shit, I don't have the skills and dexterity to wind a usable flat spiral.

the plated kangers are indeed cheaper than the stainless tanks. so maybe it is total shit plating or its a dif plating than hard chrome...?

regarding the snake coil... its much easier than you think @215z.
 
2clicker,

2clicker

Observer
hey 2clicker. Im having trouble threading the kanthal into the 2mm silica. Any tips. Thanks.

hey there. you do not want to use silica wick for this coil (or any really). you need to use "ready x wick" from RBAsupplies.com. its a braided ceramic wick of which is hollow. it is very easy to thread the wire through. if you are trying to thread it through silica then i doubt its hollow...?

if you do have readyX and cant get it to thread i am not sure. maybe the end are fraying making it difficult...?
 
2clicker,
  • Like
Reactions: 215z

fernand

Well-Known Member
This "wick around wire" strikes me as one of the best ideas to come along in a while. No need for a capture system, just dump the shit on the electric blanket and give momma some watts ! The way wicks wuz being done was Bass-Ackwards!

So what's the recommended kit, here, @2clicker, starting from no usable RBA (but plenny batteries, provari etc.) Not necessarily the all-surgical-steel and laser-polished ruby set, I'm surprisingly good with cheap gear ;-)
 

2clicker

Observer
This "wick around wire" strikes me as one of the best ideas to come along in a while. No need for a capture system, just dump the shit on the electric blanket and give momma some watts ! The way wicks wuz being done was Bass-Ackwards!

So what's the recommended kit, here, @2clicker, starting from no usable RBA (but plenny batteries, provari etc.) Not necessarily the all-surgical-steel and laser-polished ruby set, I'm surprisingly good with cheap gear ;-)

well you should be able to squeeze that coil into your favorite RBA. i use an igo-w base with a halo cap. really the only required material is the 2mm readyXwick and whatever kanthal you prefer. thicker wire seems to work a lil better because it holds it shape better, but any will work im sure. im using an red efest 18350 w/ a 1.3ohm coil.

here is my post with pics. as you can see i have the coil mounted above the contacts. this allows for a larger coil. set screws instead of the pan head screws give a little more room as well.

well i suppose i will just put there here for now. the sleeved stovetop... or snake coil, or serp coil, or whatever. :science: im using set screws that allow my coil to sit lower. of which allows for a wider coil. very easy to load and clean. really enjoying it.

brand new at 1.32ohms
548y5Qm.jpg

after about a 1/2g through it
9kWOf7v.jpg

self cleaning
m86YNm3.jpg

all shiny again!
VUurETK.jpg
 
2clicker,
  • Like
Reactions: farscaper

215z

Well-Known Member
Can that be cleaned out? How does it look disassembled? I posted a pic of that atty earlier, but an important feature for us MJ users is being able to easily clean (and better yet reclaim) all the little parts. I would be very grateful if you were the guinea pig to test it out for us @funkyjunky :)
 
215z,

farscaper

Well-Known Member
heyo, me again with them ftlinks:
ceramic: http://www.fasttech.com/products/1785603
silica: http://www.fasttech.com/products/1785602
this seems to be the best one prebuilt yet
1785602-6.jpg

1785602-3.jpg

1785603-3.jpg
it says a replaceable coil... not rebuildable... the whole ceramic cup, metal jacket and everything inside slided out of a 510 connected sleeve...

is there a fully rebuildable that you would suggest for the stove top coil @2clicker ... I suppose we would be looking for maximum surface area right?
 
Last edited:
farscaper,

chronickiller7

Well-Known Member
Hey guys. I just got into mechanical mods and rda's, and got this set up today. I've seen this thread before, but never really read into it. Now that I know more about mods and what not, I would love to build a sick oil rda. Could I use what I have currently? I might take one of these coil builds and have my local vape shop build me an oil rda hahaha, but they may catch on haha.



 
chronickiller7,

2clicker

Observer
is there a fully rebuildable that you would suggest for the stove top coil @2clicker

no not really. i use an igo-w, but would love to find something that has the pos and neg posts on the outside edges of the deck. this would leave the middle open for as wide of a coil as you would like. but other than that the coil can mounted above the posts in any RDA.

whatever RDA provides the most space is what i would recommend i suppose. aside from the 26mm stuff. thats going overboard IMO.

if anyone knows of a solid RDA that provides a lot of working space for large coils please post it up.
 

215z

Well-Known Member
@2clicker wouldn't your coil be best suited for an RDA that has one post in the center, and the second post on the edge? After all, one leg of your spiral coil is in the center, and the other leg is at the outer edge. Let me know if I am visualizing it incorrectly.
igo-l.jpg

3012520_orig.jpg

The IGO-W2 makes for a lousy e-cig atty, but I've fantasized about your spiral coil being installed inside its juicewell, on the floor.
 

farscaper

Well-Known Member
@2clicker wouldn't your coil be best suited for an RDA that has one post in the center, and the second post on the edge? After all, one leg of your spiral coil is in the center, and the other leg is at the outer edge. Let me know if I am visualizing it incorrectly.
igo-l.jpg

3012520_orig.jpg

The IGO-W2 makes for a lousy e-cig atty, but I've fantasized about your spiral coil being installed inside its juicewell, on the floor.
links man links!:argh:

ive used mvs anyone else use them?
http://www.myvaporstore.com/Youde_UD_IGO_W2_Rebuildable_Atomizer_p/yd-igow2.htm
 
farscaper,
  • Like
Reactions: 215z

2clicker

Observer
@2clicker wouldn't your coil be best suited for an RDA that has one post in the center, and the second post on the edge? After all, one leg of your spiral coil is in the center, and the other leg is at the outer edge. Let me know if I am visualizing it incorrectly.
igo-l.jpg

3012520_orig.jpg

The IGO-W2 makes for a lousy e-cig atty, but I've fantasized about your spiral coil being installed inside its juicewell, on the floor.

yes the leads do come off the coil in that fashion, but id still like it to sit lower in the RDA rather than on top of the posts.

that igo-w2 looks like the center post is way too big.

@farscaper, i have use myvaporstore before and they are a top notch supplier.
 

chronickiller7

Well-Known Member
chronickiller7,

215z

Well-Known Member
I find oil hits off SS mesh to be the harshest of all wick media. I think it is because of its potential to have hotter dry spots than other media. I think you shouldn't change out your current wick, at least while you are still recovering.

Pulse your coil a few times with the cap off to warm them up, then use a dab tool to "paint" the coils with oil. Take a hit and hopefully it will get you there. If you need to vape larger amounts of oil, call your local ecig stores to see if they have FC-2000 wick. It is this black porous ceramic rod that can hold a good amount of oil, and is way more gentle to vape of than SS mesh.
 

chronickiller7

Well-Known Member
So I should leave the wick in there with the juice, and put the oil on the coil? Will the dab melt more/before the e juice? I just don't want to have to sit there hitting it. I want to minimize the amount of draw I have to do. Even if it means pulling the wicks and just using the coils and oil. I don't mind killing this coil/ build in a couple days.
 
chronickiller7,

chronickiller7

Well-Known Member


I must say this worked surprisingly well. Didn't aggravate my healing mouth. Tasted decent, especially with a little e juice. I can't wait to build a legit coil and take some massive rips hahaha. I have a feeling it'll compete with my oil rig hahaha.
 
chronickiller7,
  • Like
Reactions: 215z

farscaper

Well-Known Member


I must say this worked surprisingly well. Didn't aggravate my healing mouth. Tasted decent, especially with a little e juice. I can't wait to build a legit coil and take some massive rips hahaha. I have a feeling it'll compete with my oil rig hahaha.
is that a Kamry?
 
farscaper,
Top Bottom