Propaganja

Well-Known Member
Hey guys just to keep an update and for future reference for Canadians. My package was processed and shipped on the 17th makin it's way to canada. It went to Santa Ana, to Anaheim and today arrived at what I'm assuming to be LAX usps facility. I'm assuming my nano will be going airborne on its way to me :)
 
Propaganja,

PPN

Volute of Vapor
I tried a very nice bubble hash but I made a mistake and my heating element was cover of hash, I let it burn and stopped my unit and when it was cold I cleaned it upside down with a brush.

The screen seems clean now but I can see the ceramic is not so white now but except the first heating minutes when it smell smoky after it works like before without smell (but with a darker ceramic).

Do you think this is a big issue? cause I don't like to put a screen on my hash load I prefer to try to keep carefully some mm betwenn the heater and my load (it helps for a dab style extraction!)
 
PPN,

JeeSee

Cultured Curmudgeon
IT'S HERE. I already combusted once on my second try - pushed it up to ten and then down to 6, but I guess I should have waited a little more until it got to 6. I also put an extra basket screen in there because I had a lot of the finer dust go through... will put a picture of them both in there so I know I aren't doing anything wrong. How do you guys get your screens out? I feel like maybe putting two in facing the same side might complicate the process of removing them. I wanted to do an ISO wash because they now stink of combustion!
The vape in itself does its job like none other I have experienced, not even the Volcano. I am pre-heating it for an evening sesh as we speak, something to help me through a nice swim. I literally took the load I was vaping out of the MFLB and put a pinch of it into this one, three hits later I could barely move, forget finishing of the other 5/6ths of that trench. :razz: Mad efficient!
It's so small! I couldn't believe it, when the package came in I thought the customs had removed the actual vaporizer or something, I could barely find the little thing! My largest concern is that it seems to be a little too easy to drop that stem, I should have got a replacement along. I thought it screwed on to the end of the heating element but it just sort of gingerly slots into place and you have to hold it carefully the whole time. Plus, the fact that it's inverted meant I dropped the herb a couple of time after straightening it by accident, lol. VERY EXCITE. :love:
 

Reflections

Well-Known Member
woohoo finally came for ya JeeSee congrats and enjoy..yes shoulda bought extra stems..in case break one or u can also get a wooden stem form eds tnt so always have a stem... or a gong for water...i just gently tamp the herb so it doesnt fall out! I just use a chopstick to push my screen out.
 

JeeSee

Cultured Curmudgeon
Do you hit it dry at all? What do you do about the dust that comes through the screen?
 
JeeSee,

Richy

Frequently up in space with Bowie
IT'S HERE. I already combusted once on my second try - pushed it up to ten and then down to 6, but I guess I should have waited a little more until it got to 6.

Were you using Jeremy's boiler theory?


Do you hit it dry at all? What do you do about the dust that comes through the screen?

You could try putting a small piece of cotton wool in the mouthpiece end of the stem to catch the fine dust. You'll want to sort of pull the cotton wool apart as much as you can so that the air/vapour will flow through it more easily and it shouldn't get clogged as quickly.

Once it does become clogged you have the option that you can pop it in the top of the stem and vape the goodies off of it.
 

splinter1

New Member
Besides having a spare, would there be any reason to grab the stem with the glass screen when I buy my nano?
Just wondering if current users that have both types of stems have a preference?
My understanding is that the nano comes with the stem without the glass screen.
Thanks.
 

ataxian

PALE BLUE DOT
Besides having a spare, would there be any reason to grab the stem with the glass screen when I buy my nano?
Just wondering if current users that have both types of stems have a preference?
My understanding is that the nano comes with the stem without the glass screen.
Thanks.
The water adapter and a JHOOK works 1000X better than a stem.
Save your money!
I use a bubbler or water pipe the most anyway!
 

Delta3DStudios

Well-Known Member
Accessory Maker
You have amazing options when it comes to stems... however, I would recommend that you get at least one glass stem and a glass Gong, so that you have a backup, and also so that you can get the basics dialed in before you decide that, like me, you NEED an @Ed's TnT stem. Or, one of @VaPeD&CoNfUsEd gorgeous custom stems, or....

Exactly! I love the ability to customize the glass. I also love supporting a flourishing artist (@VaPeD&CoNfUsEd ). I can't wait to get a custom WonG made by @Ed's TnT in the near future.

The beautiful part is the stems can help you personalize your Nano. Kinda like the SSV with the marble control knob, this is a great way to add some glass flair to your piece.

Here's my custom 19mm GonG and matching claisen stopper made by Joda Glassworks
vXa3gNz.jpg
 

Ed's TnT

Woodsman
Manufacturer
Hello, @Ratchett you have got yourself an amazing piece, I would be more than happy to to do something for you! Let me know when you are ready and we will go from there. Thanks for thinking about me and I appreciate the opportunity to do some work for you in advance!
 

ataxian

PALE BLUE DOT
You have amazing options when it comes to stems... however, I would recommend that you get at least one glass stem and a glass Gong, so that you have a backup, and also so that you can get the basics dialed in before you decide that, like me, you NEED an @Ed's TnT stem. Or, one of @VaPeD&CoNfUsEd gorgeous custom stems, or....
I use bubblers more than stems!
Od6xEgm.jpg
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
I use bubblers also @ataxian - but must admit that with my Nano I have a preference for my Ed's & V&C stems. There's just something about the extra taste, ease, and comfort that my custom exotic dry wood & glass stems & Wongs afford me. Much respect to my fellow FC Zen Master @ataxian :bowdown:, but I must also yield with the highest regard for @Ed's TnT and @VaPeD&CoNfUsEd, for they are also true masters!!!:bowdown:
 
Last edited:

ataxian

PALE BLUE DOT
I use bubblers also @ataxian - but must admit that with my Nano I have a preference for my Ed's & V&C stems. There's just something about the extra taste, ease, and comfort that my custom exotic dry wood & glass stems & Wongs afford me. Much respect to my fellow FC Zen Master @ataxian :bowdown:, but I must also yield with the highest regard for @Ed's TnT and @@VaPeD&CoNfUsEd, for they are also true masters!!!:bowdown:
Show me please!
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Show me please!
Aah! So it's wood & glass porn you seek... I shall have to refer you to the many many pics I've posted throughout the numerous threads related to the Nano, Ed's, V&C's, assorted glass threads, and my own exotic woods thread. And stay posted for my new upcoming pics & posts that will feature even more of V&C's & Ed's masterful handy-works!!! Oh, I can't wait!!!
 

Tweak

T\/\/34|<
Besides having a spare, would there be any reason to grab the stem with the glass screen when I buy my nano?

Flavor I suppose. No SS in the path, so a tiny bit more flavor at the cost of some restriction and possible debris making it through the stem. A clean SS screen is such a smooth pull.

Do you hit it dry at all? What do you do about the dust that comes through the screen?

The screens are pretty fine, so there isn't a ton of dust. Most that makes it through sticks to the wall.

But you could also use a GonG + j-hook dry, causing a bend that would collect a ton more dust than straight path. Or as suggested, some cotton or a piece of pantyhose would work as a filter.
 

Submisfit

Well-Known Member
Flavor I suppose. No SS in the path, so a tiny bit more flavor at the cost of some restriction and possible debris making it through the stem. A clean SS screen is such a smooth pull.



The screens are pretty fine, so there isn't a ton of dust. Most that makes it through sticks to the wall.

But you could also use a GonG + j-hook dry, causing a bend that would collect a ton more dust than straight path. Or as suggested, some cotton or a piece of pantyhose would work as a filter.
I actually get a heavier draw from my all glass stem. It hits so hard that I actually can't use it without the cotton; I get much too much too quickly, and tiny debris makes it through the holes.
 

macbill

Oh No! Mr macbill!!
Staff member
I just got my first e-nano, and I am enjoying learning its nuances. I was very much pleased to find that the dial goes 1 past 11, thus being 1 'more' extreme than the volume knob on Nigel Tufnel's amp!!!

The plug is very loose - it keeps falling out. I've wedged a small piece of card stock in the socket. Ah, much better...
 
Last edited:

ataxian

PALE BLUE DOT
I use bubblers also @ataxian - but must admit that with my Nano I have a preference for my Ed's & V&C stems. There's just something about the extra taste, ease, and comfort that my custom exotic dry wood & glass stems & Wongs afford me. Much respect to my fellow FC Zen Master @ataxian :bowdown:, but I must also yield with the highest regard for @Ed's TnT and @VaPeD&CoNfUsEd, for they are also true masters!!!:bowdown:
@Snappo I have a ED' s wood stem for my SOLO.
It's durable for sure.
FLAVOR WISE?
I respectfully disagree.
Glass is the cleanest flavor.
Cannabis by itself taste amazing.
That is what I want to taste.
My wood stem is pretty and strong.
However I will use a water adapter and a bubbler first.
I thought about a 18mm WonG?
One for the NANO and one for my SOLO.
When I wanted one they weren't available?
Vaped & Confused doesn't give a straight answer so I don't know how his stuff works?

For now I have 14mm NANO & SOLO GonG' s.
They work great!

Cannabis is the HOLY GRAIL!

Accessories are cool however CANNABIS is cooler!

Priorities!
 

Propaganja

Well-Known Member
man im dying for the enano to arrive. still on its way to canada from LA somehow? im assuming ground route because its been a couple days since it left lax.. can anyone chime in =)
 
Two nights in with my Nano.

We've been using a Solo for the last 6 months, and I realize now how underpowered it was.

We were so medicated the first night, that trying to deal with the adjust-a-bowl was to much of a challenge. We always use water, so I'm going small buds and the fixed glass bowl.

I hate Massdrop, but always love what I buy there.

So other than the putsy gong- I love it.

Edit-words
 
Last edited:
Top Bottom