• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued The Persei Vaporizer for herbs and concentrates.

invisiblefriend

Well-Known Member
Manufacturer
I think I may have gotten something figured out or narrowed down !

respect 215z
(I think u onto sutten w/batteries ) I have not tried the hurt yet -- but ….

I just fooled around with different configurations …
as far as shorty with 1 batt / then the other … n so on --

well in the end -- every time I twist with one battery the persei top lights up ---- then when I use the second battery -- It doesn't light up -- -- it may have for a hot second ? -- but now not at all ---- It shows being a fully charged battery but I think it is simply a BAD battery ? it just doesn't work --

Im going to grab some new batteries and see if all problems solved (advice on best batteries to use 4 Persei ???


If anyone thinks I'm going down wrong path plz advise -- but this makes the most sense !


ASIDE simple battery bs----- WOW THIS IS A TRUE unique and incredible TOOL ! VERY VERY WELL MADE !
 
invisiblefriend,

invisiblefriend

Well-Known Member
Manufacturer
does it make sense to have a dead batt on arrival ? I'm sure ? ---

any advice as well ---- what do you pros use to watch your batteries over time ?
and best place / or type of batteries to match this incredible machine !

peace luv n respect
 
invisiblefriend,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
does it make sense to have a dead batt on arrival ? I'm sure ? ---

any advice as well ---- what do you pros use to watch your batteries over time ?

We do have some issue with the regular imr batteries and trying to fix the QC issue, but pm me your information and let me find your order and ill see about sending out a new imr battery, also the best batteries to use are the AW brand.
 

invisiblefriend

Well-Known Member
Manufacturer
thank you my friend ! and again ! Now I understand ….. this allows for a true medicinal delivery system …


I mean the bs lil throwaway vapes everyone has become used to and mods --
- imo --- this is the almighty ! it even just "feels" right ! :)

Now I understand !

Thank YOU AgAIN
 

Fredster951

Well-Known Member
Yes batteries can be dead on arrival (DOA). If ur bottom spring is good I would suspect the batteries. Especially the none AW IMR batteries. I had a dead one too but I had extra AW set. Let us know how it goes. And the Persei tool is bAdass. Can't outlung this sr74. Learn to respect it and care for it. Last vape you will buy !!
 

gt35rsr

Member
So i recently purchased the persei and Hercules and i love it. I am thinking of trying the ss kit and using the herc at a 3.7 setup just to try and be a little less obvious if im in public. If i am to run the herc at 3.7 i am pretty sure i will need AMR 18350 batteries and the black rod. If i am missing anything or if anyone has any suggestions please feel free to inform me. I have browsed through a ton of pages in this thread and learned a lot of info already. Thanks for the help
 
gt35rsr,

invisiblefriend

Well-Known Member
Manufacturer
I'm still on my learning curve -- but I may have read about it really being made // or work better at 7.4 ? I'm not 100 % sure -- but ill keep u posted as I learn more my friend!
 
invisiblefriend,
S
The 8 is a hybrid mechanical mod.

This means there is no wiring in there but it does come with a fuse that goes on the bottom. We highly recommend this fuse since running anything without protection is against our philosophy.

Just in case you decide to go all out the fuse is replaceable and the 8 will work without it.
Sorry im still a little confused. So i understand the implication of a hybrid mod but I dont understand it enough to comprehend the diffrence in power output between it and the persei. As far as output will there be a diffrence?
 
DatOilVape,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
S

Sorry im still a little confused. So i understand the implication of a hybrid mod but I dont understand it enough to comprehend the diffrence in power output between it and the persei. As far as output will there be a diffrence?

no difference.

The only difference is the 8 top can be rebuilt.
 
THC SCIENTIFIC,
  • Like
Reactions: DieHard

ED421

Well-Known Member
Vapewarehouse list 2 types of KISS Globes, Ophos style and Omicron/Persei style. What is the difference? Are there 7.4v and 3.7v Globes or is the only difference the cosmetic "skirt" on the Ophos Globe to hide the threads completely?
 
ED421,

Caligula

Maximus
Vapewarehouse list 2 types of KISS Globes, Ophos style and Omicron/Persei style. What is the difference? Are there 7.4v and 3.7v Globes or is the only difference the cosmetic "skirt" on the Ophos Globe to hide the threads completely?

Ophos style carts have a 510 external skirt to cover the threads on ego style batteries such as the Ophos. That's the only difference.
 
Caligula,

itschad

Well-Known Member
should i get the shorty insert >_>


edit: i did it


k cool so an omicron, a persei, an 8 when it comes, and now a core


in search of triton please :3
 
Last edited:

SamuraiSam

Extraction Technician
should i get the shorty insert >_>


edit: i did it


k cool so an omicron, a persei, an 8 when it comes, and now a core


in search of triton please :3
I really like the 18350 tube! I might even get another for the Bender! With the SS tube you don't have to pull your garnish ring off the std. tube which is really nice!
 
SamuraiSam,

kronus

Well-Known Member
I need some persei help on the unit I bought in 2012 , love the persei and own a chrome and black one but the black one stopped working

can't wait to try out the kiss carts looks awesome
 
kronus,

trich0me

Member
For the life of me I am not able to get the 3.7 setup on the Persei SS with the Hercules (black post) and the the X upgrade to vape properly. I have put .8 of a G of shatter in there and taken 3-4 hits, none of them really special, no cloud to speak of. I am not sure if it is a mix of not holding the throttle down long enough, too long, too short.. not sure. I checked the bottom catch, there is no oil down there, so i am not burning it all up. If I put a 3.7 Kiss Ti on there, drop a little ball in there, life is good... I really would like to get the 3.7 working efficiently, the 7.4 setup is just massive, I might as well have my toro in my pocket if I need to have the 7.4 setup, haha.

Thanks for any other insight here, cheers!
 
trich0me,

215z

Well-Known Member
@trich0me is your rod positioned correctly? the entire black band between the metal electrodes should be visible after you torque down the retaining nut. What battery are you using in 3.7V mode?
 
215z,

trich0me

Member
@trich0me is your rod positioned correctly? the entire black band between the metal electrodes should be visible after you torque down the retaining nut. What battery are you using in 3.7V mode?

On the rod, I have tried sliding it in and out, .5mm at a time, sometimes making it inoperable other times it would work, but just take awhile to heat up. The battery is a AW 3.7 from the w9 store. I have 3 extras, and have swapped those out, recharged, in an attempt to fix as well.
 
trich0me,

Vapvap

Well-Known Member
On the rod, I have tried sliding it in and out, .5mm at a time, sometimes making it inoperable other times it would work, but just take awhile to heat up. The battery is a AW 3.7 from the w9 store. I have 3 extras, and have swapped those out, recharged, in an attempt to fix as well.
Open the Hercules lid and look inside with a lamp while pushing the Persei's button about 10 seconds. Do you see oil vapor ?
Is your button's battery up ?! (if you put battery upside down, it not works)
 
Vapvap,

Mynameismud

Accessory Maker
Accessory Maker
For the life of me I am not able to get the 3.7 setup on the Persei SS with the Hercules (black post) and the the X upgrade to vape properly. I have put .8 of a G of shatter in there and taken 3-4 hits, none of them really special, no cloud to speak of. I am not sure if it is a mix of not holding the throttle down long enough, too long, too short.. not sure. I checked the bottom catch, there is no oil down there, so i am not burning it all up. If I put a 3.7 Kiss Ti on there, drop a little ball in there, life is good... I really would like to get the 3.7 working efficiently, the 7.4 setup is just massive, I might as well have my toro in my pocket if I need to have the 7.4 setup, haha.

Thanks for any other insight here, cheers!
Few things to check. Try firing the herc without the black shield to see if it gets hot. If it does it's possibly assembled correctly if not start over. If your using 1 coil 0.8 is too much for the black rod and also don't expect the same results or timing as the white rod. The black rod works really well with the hammer top. It takes about 10-15 seconds of priming then a long slow deep hit. To load I put in about 0.2-0.3 melt it down then add another 0.2-0.3 but don't melt it in fully for the black rod....

If your not getting good results it's generally better to figure out what's gong on then to keep adding oil and hope it will fix itself
 
Mynameismud,

gudiss

Well-Known Member
On the rod, I have tried sliding it in and out, .5mm at a time, sometimes making it inoperable other times it would work, but just take awhile to heat up. The battery is a AW 3.7 from the w9 store. I have 3 extras, and have swapped those out, recharged, in an attempt to fix as well.
what battery r u using? 18350 or 18650? i have not been successful with the 18350 on the 3.7 v. LED seems to dye out right away-
 
gudiss,
Digging the bender more than I expected to. It vapes my weed pretty well. Much shorter learning curve than the herc.
Not digging the sr-71 as much as I thought I would have, but it's still the shit.

Hoping the flexo (and the new hammer rod) and the triton are released at the same time as the touch top, so I can max my card out and order them all, with like 4 more extra batteries at the same time. Then I'd have to order some exquisite glass.
I'm super excited for the 8, and okeanos. I'll prolly sell another persei body, and hammer top (possibly my herc if the triton stacks up). Prolly sell my hammer rod to my girl when I finally get a chance to snag one of the 1900 rods.

Prolly not gonna see the iris pre-order until 2015, and that's cool.

Living the dream with the herbie at home (really want a gong attachment, and a cool stand to set up the baloons without possibility of leaking, or tipping over)

an ss kit in my pocket, with the 8, an okeanos and a low ohm liquid cart; A nice little travel pack with the touch top (hammer), the 1900 hammer top, the bender and the sr-71 herc; and the core in my monte carlo, as the icing on the cake.
 

invisiblefriend

Well-Known Member
Manufacturer
Hey all --- Im still getting used to all with the Persei :)
So far I'm super Happy n even more happy I got the core -- It is essential - !!!!! Im still waiting to make sure a dead battery is my other issue with making it 7.4v- but again the core took care of that issue :)

I have been enjoying the 7.4 kiss cart .. since my old 3.7 kiss burnt out a while back (cannot wait 2 rebuild & get a spare !) interesting using the 7.4 cart -- I like it -- just pulsing !
Onto an actual different question ?

I see others discussing the Hurcules 74 .. I am just opening the brand new box today … so obviously a learning curve is coming .. but I'm excited !!!!! a drop concerned about going through more oil but worth it I'm sure !

(the box came with the assembled unit :) and a nice tool in the box - also had 2 extra coils it appears - and then the box has one thin extra space and I was wondering if something belongs in that space ? or is it just a thin extra spot in the box in case it was needed in future ? )

Yet I ask this ? --- because I see people speaking about a 3.7v setup ? I was under the impression this was to be used as 7.4volts and honestly didn't think it was able to work well at 3.7v ? Then I went to website and I see they have a ceramic rob for 3.7 and another for 7.4 black n white .. What does the unit come shipped with ? black or white ? 7.4 or 3.7 ?
do i order the other that wasn't shipped from w9? It would be nice if both work !
again any help / advice is welcomed and I thank you ! sorry if this was brought up in another spot .. I have not found it yet in my searching .

Peace n respect my friends !!!!!!!
 
Top Bottom