Discontinued The Persei Vaporizer for herbs and concentrates.
- Thread starter THC SCIENTIFIC
- Start date
Final versions of the Touch button tops are being manufactured to be tested and production starts
The touch button tops have the Hammer top function as well.
Getting it right is the key.
closer to the v2 yes, just need time to get it right.
The touch button tops have the Hammer top function as well.
Getting it right is the key.
closer to the v2 yes, just need time to get it right.
Yes it is safe and works great!
Caligula
Maximus
Errday.
Hi there, I've attached two images of the issue I'm having. The bottom tank is the 74x, the threads go all the way to the bottom therefore the retaining nut isn't able to screw down all the way.
http://imgur.com/mCwIJZj
http://imgur.com/Wiu8P7e
http://imgur.com/mCwIJZj
http://imgur.com/Wiu8P7e
Are you screwing the retaining ring on upside down? Is your issue that you cannot screw the ring down far enough to hold the aaf(gold star washer)? The retaining ring's (nut) main function is to hold the heater in place and insure contact to the heater.
Andy
Well-Known Member
mine has that issue too. On the x the nut (retaining ring) doesn't sit flush with aaf like it did with the 74. Is this normal? Anyone else have that issue?
I can say that I prefer my herc 71 dialed down with iris over the black rod and hammer....
Although it is nice to busy a herc on the shorty occasionally
The Triton Wicking system is almost done guys just got good news from our mold makers.
Expect to see good things in the future.
Expect to see good things in the future.
gudiss
Well-Known Member
yes! i received and assembled the 74x and ran across the same issue. i called and spoke to gary who said this was normal for the "x"
c0rpse
Well-Known Member
After many days of testing the new Persei tops I must say the only flaw we found was the button is super sensative.
Let's hear some feedback on its looks and what would you guys want to be encorporated in it.
This is a prototype unit so please don't worry about the looks.
For some reason I thought you said this wasn't going to be a feature, so I bought a Hammer top
Fredster951
Well-Known Member
. Thank you for the info. Does this mean the AAF is no sitting flush therefore it wobbles up and down? If if does, maybe it's better not to run it? I run my herc AAF fully open so I don't need that AAF. SR71 old style.
Fredster951
Well-Known Member
I ditched my top screen too. Tired of cleaning everyday. I found that a slow steady draw works. If u suck like a banshee you might get some oil in your mouth. Hot!! Ever happen to you Caligula ? I adjusted my draw to avoid sucking hot oil. Overall much better without the screen
StickyShisha2
Well-Known Member
i went the other way. I added an additional screen to the metal undercap. It is a wide mesh, curving up, and seems to catch any splatter and allow it to run back down the sides. My top screen no longer clogs and i don't get splatter inside my nibler
Fredster951
Well-Known Member
. Good idea!! You have a pic of your set up?
StickyShisha2
Well-Known Member
i'll try to get someone to take a picture to post.
my other modification to my Herc is with the heat-shield. I carved a groove for an O-ring on the upper half of the body, and relocated to top O-ring from the cap. Now the cap can't pull off inside the NiblerXL
bdmonkeyj3w
Well-Known Member
ill jump in for a minute and say that i, too, get oil in on the tongue... tends to happen when battery is super low and doesnt get hot enough...
Fredster951
Well-Known Member
Yes I have noticed too when battery is low you get splatter. Sucks! I try to keep charged batteries along with the slow steady consistent draw works.