• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Discontinued Elevape SV

meduser#420

Fear & Loathing in FuckCombustion
Is there a way to flip the bowl upside down then back or shake it up? Instead of stirring? I do not have one so....
 
meduser#420,

sasNW

Well-Known Member
Is there a way to flip the bowl upside down then back or shake it up? Instead of stirring? I do not have one so....

Not unless you had a very small amount in the bowl. It's going to require a quick stir or two. But ime you don't have be worry about getting it messy when you stir, just a quick tamp back down and you're good. I still have yet to clog the air path with material, and I'm not careful with it
 
sasNW,
I see this is currently going for $279 at Vapor Nation. Is this a special sale or has it been this price for a while?
 
letter never sent,
Oh weird, last night I'm pretty sure it had a listed sale price of $279. Now it's $324 with 20% off? Either way, that makes it significantly more appealing to me. Was thinking about the Firefly as my next portable, but I'll have to give this unit consideration as well.
 
letter never sent,

webnomad

Well-Known Member
Letterneversent,

You're right. On Wednesday, I made the order for the sv, since the 20% coupon code timer was ending that night. Next day I went back to vapornation to see if the 20% had in fact expired, and I saw the sale price of $279 that you mentioned. I tried to use the Fuckcombustion code on it, and it wouldn't work.

I have noticed that vapornation has coupon codes with timers that expire after X amount of hours, only to start right back up again. I say $259 is a pretty decent deal, considering I also got a metal grinder, and a digital scale...making it roughly in the price range of the Pax I bought just over a year ago for around $240.
 
webnomad,

°k

The sound of vapor
So I've ordered Elevape SV, tracked the parcel with eagerness, been patient, went to the delivery center to collect the parcel, paid the damn customs taxes, came back home to charge and then iso clean my new aquisition and plugged it to my laptop after downloading the software.

temp.jpg

@Ipuffusa
Could you please let us know what kind of temperatures do these 7,10 and 17 correspond to?
I've seen screens of older versions and the temperatures were displayed in F°.

Also, how do you know what software version is installed and what firmware is on the SV?

Thanks in advance.
 

kazz

Little Lebowski Urban Achiever
@Ipuffusa
Could you please let us know what kind of temperatures do these 7,10 and 17 correspond to?
I've seen screens of older versions and the temperatures were displayed in F°.

I asked the same question during my phone "service call" and was told that number 10 is approx 350 degrees. Then each point is approx 5 degrees up or down.

He gave me a reason why the app now has number settings vs degrees, but to be honest, that part of the conversation is a bit fuzzy and I don't remember the rationale.
 
kazz,
  • Like
Reactions: °k

°k

The sound of vapor
I asked the same question during my phone "service call" and was told that number 10 is approx 350 degrees. Then each point is approx 5 degrees up or down.

He gave me a reason why the app now has number settings vs degrees, but to be honest, that part of the conversation is a bit fuzzy and I don't remember the rationale.
Hey @kazz thanks for the answer. So how's the SV doing for you? I got uneven avb (some bit are totally unvaped and some get almost black, and that's without even a decent vapour production), I find the airflow rather restricted.
I've tried different temp settings up to 23 and need to stir every 2 hits to get a little cloud and that's after pumping to trick the 8 sec safety. While cleaning it for the first time I've noticed the coil wasn't flat but didn't touch it, I'm thinking that might come from this but would prefer have opinions from other users and from @Ipuffusa first.
 

kazz

Little Lebowski Urban Achiever
Overall, I am enjoying the unit a lot. My major complaint on it is the airflow/draw. I don't know if it is because I am used to ecigs and vaping bags, but I prefer a more "airy" inhale.

When the unit is freshly cleaned, I have no problems with it at all. But, I do find that the screen at the tip of the mouthpiece becomes cluttered with debris and restricts the airflow. So, I am cleaning that after every bowl. I figure this can be remedied if I can figure out the right way to stir the bowl without getting matter in the slots at the top. Then they won't be drawn into the air path.

This is my first portable, so I'm not the best person to comment on exhaled vapor. But, I have found that I seem to get more if the bowl is nicely packed. If I have it loose, I don't get a cloud at all. But, I do get the effect.:)

My coil is flat, and I haven't had any issues with uneven color. I stir 2-3 times before reloading and it seems to be a nice brown color.

If I'm just kicking back in the recliner at night, I prefer the Vapir Rise for bag inflation. But, the Elevape is definitely convenient for on-the-go situations or a quick session. I don't regret the purchase at all.

Good luck fine tuning the SV to your liking!
 

chillersnov8p

Well-Known Member
Kazz, try blowing into the mouth piece before loading a new bowl. You can also put your finger over the bowl and blow to clear the airway during use.

Took the vape on an all day mtb ride with a few buddies. Fully charged unit provided four long sessions for the three of us. When I got home and plugged it in battery power wAs basically spent.

I have gone from using higher temps in the beginning to preceding lower temps now. My friends seem to prefer higher temps to feel like they r getting a hit.

Hot spots on the bowl seem to always occur in the same spot. With the mouth piece pointing down looking at the bowl the hot spot is at 10 o'clock about halfway between bowl edge and center. I stir every four draws or so. Switched my metal stir stick for a wooden match, got tired or the magnet grabbing it.
 

kazz

Little Lebowski Urban Achiever
Kazz, try blowing into the mouth piece before loading a new bowl. You can also put your finger over the bowl and blow to clear the airway during use.

Wow! Such a simple concept. And it never even crossed my mind... I will definitely have to give that a try.

(and I agree about the metal tamper/stir stick. I does get annoying with the magnets(

Thanks!
 
kazz,
  • Like
Reactions: tripwire

°k

The sound of vapor
After having it for 1 day and while I was experimenting different way to load and use it, my unit seemed to have turned into a semi lemon... it refuses to heat up if not plugged... the light still switches on and I know the battery is around 70% but the unit stays completely cold. As soon as I plug it (whether it's to my laptop with the app open or just a USB charger) then it heats up and I can get my uneven avb after only a couple of hits.

@Ipuffusa please tell me this is all user related and that it can easily be arranged.
 

Kaptan

Well-Known Member
After having it for 1 day and while I was experimenting different way to load and use it, my unit seemed to have turned into a semi lemon... it refuses to heat up if not plugged... the light still switches on and I know the battery is around 70% but the unit stays completely cold. As soon as I plug it (whether it's to my laptop with the app open or just a USB charger) then it heats up and I can get my uneven avb after only a couple of hits.

@Ipuffusa please tell me this is all user related and that it can easily be arranged.
You may want to send an email or call them for support.
 
Kaptan,
  • Like
Reactions: sasNW

kazz

Little Lebowski Urban Achiever
... it refuses to heat up if not plugged... the light still switches on and I know the battery is around 70% but the unit stays completely cold. As soon as I plug it (whether it's to my laptop with the app open or just a USB charger) then it heats up and I can get my uneven avb after only a couple of hits.

@Ipuffusa please tell me this is all user related and that it can easily be arranged.


Man, sorry to hear about your experience. I agree, email or call to report the issue.
 
kazz,
  • Like
Reactions: tripwire

Ipuffusa

Well-Known Member
Manufacturer
Hi fellow Vape enthusiast,
Thank you for your reviews and suggestions .
@k. Sorry to hear you are having issues . Please Fully charge the unit and contact me I'm sure we can get you back to vaping in no time.
 

chillersnov8p

Well-Known Member
Good luck K hope you get her figured out.

Slight edit to my last post about the hot spot. Packed a full bowl with gentle finger tamp. 6 pulls, good clouds temp setting 1 without stirring. The last draw flavor was a bit burnt tasting. Opened the lid. Slight browsing around the edges, green in the middle, under the screw, and dark brown on left side in the shape of a c around green center(I know picture would be better). This pattern makes sense as there is no draw through the area of the screw. Why it's only on one side probably has to do with the shortest air path. Browning on my unit happens on the same side as the air intake port. Just fun obs. Don't mind stirring...yet. Love the flavor and clouds
 

sasNW

Well-Known Member
Good call @chillersnov8p
I packed the fattest bowl yet on my ride home from the dunes last night (I'll weigh it out tonight to see how much it can really handle) , very tight draw to start but the clouds and taste were the best yet! A tight pack and fast draw makes the SV a cloud and taste beast!
 

Buildozer

Baked & Fried
Anyone up for a video demo of its hit capabilities :brow:
Has anyone tried to hook this thing up to a bubbler yet? If it can hang w/ that, I'd love to see it in action.. :cool:

@sasNW, Did that oil pad work out for you?
 

sasNW

Well-Known Member
I should have time this week to do a video showing a session or two, just Been busy as hell lately.
I actually got too busy at the dunes to even give the oil pads a try. I'll give them a try in the next day or two and report back
 

Scrimshaw

Vaped Crusader
So, then...
t = 305
for x in range(1,31):
print x," = ",t," degrees"
t += 5​
....:
1 = 305 degrees
2 = 310 degrees
3 = 315 degrees
4 = 320 degrees
5 = 325 degrees
6 = 330 degrees
7 = 335 degrees
8 = 340 degrees
9 = 345 degrees
10 = 350 degrees
11 = 355 degrees
12 = 360 degrees
13 = 365 degrees
14 = 370 degrees
15 = 375 degrees
16 = 380 degrees
17 = 385 degrees
18 = 390 degrees
19 = 395 degrees
20 = 400 degrees
21 = 405 degrees
22 = 410 degrees
23 = 415 degrees
24 = 420 degrees
25 = 425 degrees
26 = 430 degrees
27 = 435 degrees
28 = 440 degrees
29 = 445 degrees
30 = 450 degrees
 
Last edited:

kazz

Little Lebowski Urban Achiever
@Scrimshaw

I don't know that those are necessarily exact temps per setting. But, as I understand it, yes--those are the guidelines that the company uses in their app.
 

Scrimshaw

Vaped Crusader
Agreed @kazz, probably not too exact, but gets us in the ballpark. I suspect the company is reluctant to post figures because the actual temp will vary dependent on draw speed, moisture, density, etc. What these temps do tell me though, is that I probably want to lower my settings of 18/22/26 a little...as soon as I can find a 420-friendly PC, lol. What settings work best for you guys?
 
Scrimshaw,
Top Bottom