• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cheap High Quality Bubbler

ou812?

Well-Known Member
5TOfJQ.jpg


The ring around my planet was in fact not very well welded ; it literally exploded, crushed in my hands with micro chips of glass everywhere on my desk and on me.

Worse than the loss of the piece, the glass chips battlefield. Took me 2 hours to wash up this nightmare. I took no chance, washing and cleaning everything, looking everywhere, I always have the terrible fear of getting one of theses in my skin or even worse, in my vaping material, or food, I also have a kitty cat, I had to keep her away, I get paranoid and it's such a bad vibe, I feel like I have been contaminated or something. I have to be 100% there is no tiny bit left anywhere.

I sent the picture to kathy, I still have my feedback pending. I hope for a refund but not too hard.

The welds were too small and it also shows how bad the annealing is. I did nothing special, just handling it with both hands and loading a bowl on top, one hand on the ring, the other on the planet.. This is fragile, beware guys if you want to keep it in one piece.

I had a bad feeling about that planetary ring from the beginning.

Anyway, I soon will have a one of a kind, custom made worked recycler that just have been made by my favorite blower. I'm happy I still buy artisan pieces, I couldn't only rely on the mass produced stuff.



WOW sorry Roger,I have always thought that may have been a suspect ,I would think its kind of hard to tack weld that ring to the globe, to not destroy the integrity of the roundness of it by the heat of welding the ring to it. I guess very little amount of glass and heat is what is done, leaving you with a fragile unit per say on the ring. The rest of the unit looks good and now you have a round ball rig,and hopefully you have removed all the harmful shards for you and your pets. And I would think they will make good on it and wish you well on the situation.:nod:
 

Sinclue

OK disagree with me, I can't force you to be right
Anyone know if this would fit the cloud? Not sure if this adapter has enough clearance (19mm inputs are close together)

http://www.ebay.com/itm/321166593780?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

I would think it would. I have a similar one that does. You just have to twist it so that one part of the "Y" sticks further away from your glass and the other leg close to the glass. Also depends on the configuration of the glass you are using, of course.

~
 

ou812?

Well-Known Member
I would think it would. I have a similar one that does. You just have to twist it so that one part of the "Y" sticks further away from your glass and the other leg close to the glass. Also depends on the configuration of the glass you are using, of course.

~


Love your Rasta pup avatar :tup: Is he/she your own ? Very cool!!
 

cybrguy

Putin is a War Criminal
green-buddha-glass-green-12-arms-ashcatcher-18mm-14mm-6ce0.jpg




heres the one I bought and ALL HOPE IS RESTORED ,theyre still avalible.They make excellent bubbs and you my friend are correct,theFLAVA FLAV!! for some odd reasons this and a cheapie Pipes Daddy earl rig are my best tasting vape rigs.

That is a nice piece, but I must say I don't understand the idea of these high diffusion rigs being good on flavor. From purely a logical perspective one would expect most of the flavor to be diffused out by the action and surfaces. I have a small AC with a HC, and even that seems to rob more flavor than my D020 and my 20T. Beats me.
 

Delta3DStudios

Well-Known Member
Accessory Maker
That is a nice piece, but I must say I don't understand the idea of these high diffusion rigs being good on flavor. From purely a logical perspective one would expect most of the flavor to be diffused out by the action and surfaces. I have a small AC with a HC, and even that seems to rob more flavor than my D020 and my 20T. Beats me.

Indeed this is why I don't think I'll use that AC as my daily driver. It does in fact rob so much flavor from the flowers. Actually on my first session with the new AC I thought there was something wrong with my nano because I couldn't taste much! I agree the flavor is much better from my D020 and D020-W.

The reason why I DO like it is because of the desire to eliminate the foul taste from vaping reclaim soaked cotton. Normally I don't like the taste of reclaim, but I like the high it produces for a late-night session. Using this paired with another glass piece provides extreme diffusion to the point where the reclaim is almost enjoyable to vape.
 
Last edited by a moderator:

cybrguy

Putin is a War Criminal
Indeed this is why I don't think I'll use that AC as my daily driver. It does in fact rob so much flavor from the flowers.In fact on my first session with the new bubbler I thought there was something wrong with my nano because I couldn't taste much! I agree the flavor is much better from my D020 and D020-W.

Right. I am looking for another AC with less diffusion because the shape with a j-hook is perfect for the Lotus. @pigfoot got a really nice onion bulb AC about the time I got mine that looked about perfect, with less diffusion than the HC and a good shape and size.
 

Mister G

Deceptively Old Fart
Yup! Pull the plug and it carbs for you without needing to lift your vape off!

Also if you have two vaporizers... well... :smug:

I have an Evo on the way with a hydrotube and thinking I'll try to use my Claisen with it....upside down! Has anyone tried that already? I'd rather use the plug as a carb rather than pulling the HT off, I think my ground glass plug is snug enough to stay put upside down as long as there's enough diameter to fit around the Evo.
 
Last edited:

Sinclue

OK disagree with me, I can't force you to be right
Love your Rasta pup avatar :tup: Is he/she your own ? Very cool!!

Thanks, but I can't take credit for it. Saw it somewhere years ago and when I was looking for an avatar I happened to remember it and tracked it down. The copy I found didn't have photo credit so I don't know who to thank, but they did a great job.
 

Mister G

Deceptively Old Fart
I would use mine inverted with a F 18mm + tubing. Ended up using a wine cork with a screw hook in case it was too wedged.

I think I wasn't clear, I won't be using the Evo inverted, I'll be putting the Claisen on it upside down with the female ended fork part pointing downwards and the single male end pointing upwards with the Hydrotube on top. Or at least I'm going to try and see if it all fits that way. I'd put up a picture to show what I mean if I had it already.
 

Tweak

T\/\/34|<
I think I wasn't clear, I won't be using the Evo inverted, I'll be putting the Claisen on it upside down with the female ended fork part pointing downwards and the single male end pointing upwards with the Hydrotube on top.

Perfectly clear. :tup:

I used my Cloud+ sitting on the table with the Claisen on top, but with a whip attached to the male end. That is why I say I used a cork, it isn't as heavy as glass and it has a bit more friction to stay in place with the Claisen inverted.

I didn't use it as a carb though, just some added distance between the whip and the bamboo, the vapor output is pretty dang hot.
 

Matterhorn

Well-Known Member
Hey FC, I think this might be my first post. Anyways.... placed an order on July 3rd from the Sunishe Store for this mini inline triple donut. Got here about an hour ago in WA, 6 days from China to my mailbox for free shipping is amazing.

Now onto the glass.
nRyZywr.jpg


This is my first order from DHgate, but not my first time with china glass so I expected some imperfections, but damn that inline is all sorts of crooked .

4pBvQYO.jpg


:\ Donuts look really nice though.

kVoFga5.jpg


My domeless nail does not fit through the 14mm opening so It has to sit up a little higher than I like.

For $23 shipped its not a bad little rig, its going to serve its purpose and if I wanted perfection I could have spent the filff on a real ben wilson tube, but this is the cheap glass thread so here ya go. Ill try to get a video up sometime tonight if you all want one.
 

063_XOBX

Ganjapreneur
Hey FC, I think this might be my first post. Anyways.... placed an order on July 3rd from the Sunishe Store for this mini inline triple donut. Got here about an hour ago in WA, 6 days from China to my mailbox for free shipping is amazing.

Now onto the glass.
nRyZywr.jpg


This is my first order from DHgate, but not my first time with china glass so I expected some imperfections, but damn that inline is all sorts of crooked .

4pBvQYO.jpg


:\ Donuts look really nice though.

kVoFga5.jpg


My domeless nail does not fit through the 14mm opening so It has to sit up a little higher than I like.

For $23 shipped its not a bad little rig, its going to serve its purpose and if I wanted perfection I could have spent the filff on a real ben wilson tube, but this is the cheap glass thread so here ya go. Ill try to get a video up sometime tonight if you all want one.
Same piece, same nail, same problem. Your nail is un/under-seasoned.
 
Top Bottom